A simplified model for solute transport in rivers (original) (raw)
Related papers
Integrated modelling studies of solute transport in river basin systems
2010
Surface water and groundwater systems are linked dynamically in reality as the one generally impacts directly on the other. Traditionally, however, these two water bodies have more often than not been treated as different entities by water managers and other professionals. The issue of the compartmentality of these two resources is the main focus of the study described herein. In this study, an existing 1D-2D hydro-environmental surface water model that includes a groundwater model (DIVAST-SG) has been extended to 2-D and refined through testing against three laboratory studies. A surface water-groundwater system model using foam to replicate groundwater material was created in the laboratory and the results of the hydrodynamic processes (i.e. water elevations and flowpaths) were compared with the numerical model predictions. On the whole the comparisons showed good agreement. However, dye studies for replicating pollutant transport did not show such good agreement and this discrepa...
Groundwater modelling is an important management tool to study the behaviour of aquifer system under various hydrological stresses. Present study was carried out in deltaic regions of the Cauvery river, with an objective of estimating the minimum river flow required to improve the groundwater quality by numerical modelling. Cauvery river delta is the most productive agricultural plains of south India, but the agricultural activities during the last few decades have decreased due to limited flow in the river and increasing concentration of solutes in groundwater in the eastern parts. In order to understand the causes for increasing concentration, a three-layered finite-difference flow model was formulated to simulate the groundwater head and solute transport. The model was used to simulate the groundwater flow and solute transport for 5 years from July 2007 to June 2012. There was a fairly good agreement between the computed and observed groundwater heads. The chloride and nitrate ions were considered for solute transport modelling. Observed and simulated temporal variation in chloride and nitrate concentrations were comparable. The simulated solute concentrations from July 2007 to June 2012 showed an accumulation of solutes in groundwater of coastal part of the study area. The model was used to find the flow to be maintained in the river and rainfall recharge required to flush the ions into the sea. This can be achieved by maintaining minimal flow in the river and through regulation of fertilizer use as well as by creating awareness of sustainable use of groundwater in this area.
Numerical computations are presented for the longitudinal transport of passive, conservative solutes in an actual river with the inclusion of geometrical complexities of river channels. A special emphasis is put on the method of the identification of model parameters which is based on a specially designed optimisation procedure using random control search algorithm. Two different situations are considered namely a linear version in which one can assume that the mean velocity does not vary along the channel course and when the model parameters are constant and the nonlinear version implying channel nonuniformity (and variability of model parameters along the channel).
Mathematical modelling of contaminant transport in riverbank filtration systems
2017
Analytical study of contaminant transport in riverbank filtration (RBF) systems is significant in providing a guide for managing and operating drinking water supplies from pumping wells. The pumping process and the distance of the pumping well from the river are two important factors for producing permissible drinking water from the system. Simulation of the impact of pumping rate and pumping time on contaminant transport based on analytical studies are not yet extensive. Thus, there is a lack of mathematical models for RBF systems to determine the shortest distance of the pumping well to the river, that produces quality water. This research aimed to provide a mathematical model based on advection dispersion equation and Green’s function approach to determine the potential effects of pumping rate and pumping time, on one and two-dimensional contaminant transport models in RBF systems. The model would be able to show how the pumping time and pumping rate affect the contaminant concen...