Experimental Study of a Computational Hybrid Method for the Radiated Coupling Modelling Between Electronic Circuits and Electric Cable (original) (raw)
Related papers
Experimental Study of a Computational Hybrid Method for the Radiated
In this paper, a computational hybrid method (HM) is developed for calculating the radiated coupling on an electric cable due to external electromagnetic (EM) near-field (NF) perturbations. These sources of EM perturbation are placed at some mm of the cable proximity. The analytical approach for evaluating the voltage across the cable extremities in function of the NF aggression is proposed. The HM proposed is based on the combination of analytical coupling models and numerical methods or measured data associated to calculate the induced voltages on the cable. The model developed is tested and validated for different configurations of the perturbing source in the wide frequency band from 200 MHz to 2 GHz. The methodology was validated with measurements comprised of two electric cables in different positions.
Near-field coupling model between electronic systems and a transmission line
2010 IEEE International Symposium on Electromagnetic Compatibility, 2010
This paper presents an analysis of radiated electromagnetic disturbances between electronic devices (parasitic emission source) and a transmission line. The study aims to model the coupling and for this purpose, two concepts are combined: the emission source is modelled by an array of elementary dipoles (electric and magnetic) and the induced voltage in the transmission line is calculated from the equivalent sources radiation by two different approaches. The first one is totally analytical and is based on the transmission line theory and Taylor model. The second one uses the insertion of equivalent sources into an electromagnetic simulation tool. To validate our model we apply it for two cases: a passive system and an active one disturbing a transmission line.
IEEE Transactions on Electromagnetic Compatibility, 2000
Near-field scanning is often used to solve electromagnetic compatibility (EMC) problems. Aside from the purpose of visualization of near fields, measured near-field data can be used to estimate radiated fields. One of many challenges associated with using near-field to far-field transform technique for EMC application is the handling of attached cables. The objective of this investigation is to evaluate different methods to add cable information to the near-field data for radiated-field estimation. The investigation is carried out using numerical experiments in EMCoS EMC Studio, which is a commercial software tool for EM simulation providing method-of-moments solver. Measurement results from a specially designed test structure are presented to validate the simulation results.
A 3-D Near-Field Modeling Approach for Electromagnetic Interference Prediction
IEEE Transactions on Electromagnetic Compatibility, 2014
This paper presents, through an illustrative example, a 3-D modeling approach to predict the electromagnetic interference (EMI) between complex electronic devices and interconnections placed in the near-field region. Three different analytic coupling formulations have been investigated along with a 3-Demission model to evaluate the induced voltages in transmission line (TL) extremities in the case of both matched and mismatched TL configurations. The proposed modeling method is successfully validated by comparison with numerical results using electromagnetic (EM) simulation tools and experimental results using nearfield measurement. The obtained EM coupling results are more accurate than other traditional 2-D models.
Calculation of radiated electromagnetic fields from cables using time-domain simulation
IEEE Transactions on Electromagnetic Compatibility, 1994
Abstruct-Radiated electromagnetic fields are produced by currents in cables or transmission lines interconnecting various circuits. An elegant method of computing the resultant electromagnetic field, produced by several radiating current elements, is given. The current in each radiating cable is first found from a time-domain simulation algorithm and this may be a steadystate or transient current. The radiated field is then calculated by assuming a radiating transmission line can be treated as a chain of short radiating dipoles. The problems associated with the calculation of the near-zone term at low frequencies and the overall response near the radiator are clarified. The proposed technique is fully evaluated and compared with other methods.
Near-field coupling of wireless devices and long communications cables
IET Science, Measurement & Technology, 2008
A comprehensive investigation of the coupling between mobile devices and communication/control cables in several environments is described here. Both experimental and numerical results are shown and compared using a number of different methods in different laboratories. Results indicate a good level of agreement between the different approaches thus giving confidence that predictive studies based on simulation can give a good quantitative assessment of coupling. Moreover, the studies show that varying the configuration of the coupled systems does not significantly affects the maximum coupling thus making it possible to obtain a reasonable worst case estimate of coupling from a small number of generic studies.
A Novel Approach for Modeling Near-Field Coupling With PCB Traces
IEEE Transactions on Electromagnetic Compatibility, 2014
This paper presents a novel modeling approach for predicting the response of a printed circuit board (PCB) trace excited by a nonuniform electromagnetic (EM) radiated field from complex electronic components. The proposed approach is analytic and it is based on transmission line model with distributed sources taking into account the effect of the effective relative permittivity ε reff of the PCB surrounding medium. The modeling procedure is a two-step approach: three-dimensional radiated emission modeling of the electronic component, source of EM disturbance, and using a set of equivalent sources followed by the computation of the induced voltages in the trace terminals referring to analytic coupling formulations. Comparison between modeled, numerical, and measured results enables us to validate the proposed model. Index Terms-Coupling formulations, electromagnetic interferences (EMIs), near-field measurement, printed circuit board (PCB) traces, three-dimensional radiated emission.
Design, Modeling & Simulation of Analysis of coupling to Cables due to Electromagnetic Pulse (EMP)
International Journal of Innovative Technology and Exploring Engineering, 2019
This paper is to analyze the EMP coupling to cables using 3D EM Modeling and Simulation Analysis. Bounded wave transmission line structure as per MIL-STD 461, RS105 EMP requirement in terms of peak electric field of 50KV/m with rise time-2.3ns and pulse width-25ns was developed. Single conductor cable, RF Coaxial cable were modeled. EMP Coupling to cables was carried out by placing the cable under generated EMP field in terms of induced voltage and currents due to EMP fields. EMP coupling to active line with matched termination also analyzed.
Simplified modeling of EM field coupling to complex cable bundles
Advances in Radio Science, 2010
In this contribution, the procedure "Equivalent Cable Bundle Method" is used for the simplification of large cable bundles, and it is extended to the application on differential signal lines. The main focus is on the reduction of twisted-pair cables. Furthermore, the process presented here allows to take into account cables with wires that are situated quite close to each other. The procedure is based on a new approach to calculate the geometry of the simplified cable and uses the fact that the line parameters do not uniquely correspond to a certain geometry. For this reason, an optimization algorithm is applied.
Analysis of complex environment effect on near-field emission
IOP Conference Series: Materials Science and Engineering, 2014
A time-frequency (TF) hybrid model (HM) for investigating the interaction between EM near-field (NF) aggression and grounded wire is addressed. The HM is based on the combination of techniques for extracting the EM NF radiated by electronic structures and the calculation of electrical disturbances across the wire due to EM coupling. The computation method is fundamentally inspired from transmission line (TL) theory under EM illumination. The methodology including flow chart interpreting the routine algorithm based on the combination of frequency and time domain approaches is featured. An experimental result showing the EM coupling between patch antenna-wire from 1.5-3.5GHz reveals the efficiency of the HM in frequency domain. The relevance of this HM was illustrated with a structure comprised of 20cm aggressor and 5cm victim I-shaped wires placed above a planar ground plane. The aggressor was excited with 40ns duration perturbation signal. After Matlab implementation of the HM, the disturbance voltages across the extremity of the victim wire were extracted. This simple and fast HM is useful for the EMC engineering during the design and fabrication phases of electrical and electronic systems.