Singular boundary method for water wave problems (original) (raw)
Related papers
Numerical study on a hybrid water wave radiation condition by a 3D boundary element method
Based on the constant boundary element method in a 3D numerical wave tank, a hybrid radiation condition which is the composition of the multi-transmitting formula (MTF) method and the damping zone is studied. Numerical solutions show excellent agreements with the analytical ones, which verify the effectiveness of the hybrid method. This method can be considered as a trimming of the MTF condition, or an extension of the damping zone method, and has good ability of simulating irregular waves with relatively large frequency span. Numerical study on a hybrid water wave radiation condition by a 3D boundary element method. Available from: https://www.researchgate.net/publication/256995756\_Numerical\_study\_on\_a\_hybrid\_water\_wave\_radiation\_condition\_by\_a\_3D\_boundary\_element\_method.
Journal of Waterway, Port, Coastal, and Ocean Engineering, 2009
This paper describes the development of an efficient scaled boundary finite-element model 5 (SBFEM) for the simulation of short-crested wave interaction with a concentric porous cylindri-6 cal structure. By weakening the governing differential equation in the circumferential direction, 7 the SBFEM is able to solve analytically the weakened equation in the radial direction. Only the 8 cylinder boundary on the circumference of the exterior porous cylinder is discretized with curved 9 surface finite-elements, while a complete analytical representation is obtained for the radial differ-10 ential equation. Comparisons of the numerical results on wave diffraction forces and surface wave 11 elevations at the cylinder to available analytical solutions demonstrate that excellent accuracy can 12 be achieved by the SBFEM with a very small number of surface finite-elements. The influence 13 of varying the wave parameters as well as the system configuration on the system hydrodynamics, 14 including the wave force, wave run-up and diffracted wave contour is examined and extensive re-15 sults on them are presented. This parametric study will help determine the various hydrodynamic 16 effects of a concentric porous cylindrical structure.
Journal of Computational Physics, 2021
A fully nonlinear potential Numerical Wave Tank (NWT) is developed in two dimensions, using a combination of the Harmonic Polynomial Cell (HPC) method for solving the Laplace problem on the wave potential and the Immersed Boundary Method (IBM) for capturing the free surface motion. This NWT can consider fixed, submerged or wall-sided surface piercing, bodies. To compute the flow around the body and associated pressure field, a novel multi overlapping grid method is implemented. Each grid having its own free surface, a two-way communication is ensured between the problem in the body vicinity and the larger scale wave propagation problem. Pressure field and nonlinear loads on the structure are computed by solving a boundary value problem on the time derivative of the potential. The stability and convergence properties of the solver are studied basing on extensive tests with standing waves of large to extreme wave steepness, up to H/λ = 0.2 (H is the crest-to-trough wave height and λ the wavelength). Ranges of optimal time and spatial discretizations are determined and high-order convergence properties are verified, first without using any filter. For cases with either high level of nonlinearity or long simulation duration, the use of mild Savitzky-Golay filters is shown to extend the range of applicability of the model. Then, the NWT is tested against two wave flume experiments, analyzing forces on bodies in various wave conditions. First, nonlinear components of the vertical force acting on a small horizontal circular cylinder with low submergence below the mean water level are shown to be accurately simulated up to the third order in wave steepness. The second case is a dedicated experiment with a floating barge of rectangular cross-section. This very challenging case (body with sharp corners in large waves) allows to examine the behavior of the model in situations at and beyond the limits of its formal application domain. Though effects associated with viscosity and flow separation manifest experimentally, the NWT proves able to capture the main features of the wave-structure interaction and associated loads.
Wave force analysis of the vertical circular cylinder by boundary element method
KSCE Journal of Civil Engineering, 2007
To solve the diffraction of water waves by a bottom-fixed vertical circular cylinder, a numerical analysis by the boundary element method is developed by using linear potential theory. A numerical analysis by boundary element method is based on Green's theorem and introduced to an integral equation for the fluid velocity potential around the vertical circular cylinder. The numerical results by boundary element analysis are compared with those of MacCamy and Fuchs (1954) and Williams and Mansour (2002). It has shown persistent relationship with their results. This numerical analysis developed by boundary element method will be applied for various offshore structures to be constructed in coastal zones in the future.
The Boundary Element Analysis of Wave Force acting on Multiple Cylinders
Journal of Navigation and Port Research, 2012
In this paper, the boundary element method is applied to solve the diffraction of waves by multiple vertical cylinders under the assumption of linear wave theory. A numerical analysis by boundary element method is based on Green's theorem and introduced to an integral equation for the fluid velocity potential around the cylinders. The numerical results obtained in this study are compared with the experimental data and the results of the theory using multiple scattering techniques. The comparisons show strong agreement. This numerical analysis method developed by using boundary element method could be used broadly for the design of various offshore structures to be constructed in coastal zones in the future.
An efficient scaled boundary FEM model for wave interaction with a nonuniform porous cylinder
International Journal for Numerical Methods in Fluids, 2009
The scaled boundary finite-element method (SBFEM) by Tao, Song and Chakrabarti [Scaled 7 boundary FEM solution of short-crested wave diffraction by a vertical cylinder, Comput. Methods 8 Appl. Mech. Engrg. 197 (2007) 232-242], is only applicable for wave scattering problems by a structure 9 of homogenous material. In this paper, the SBFEM is extended to deal with the interaction of water 10 waves and porous offshore structure with an opening. The cylindrical structure is considered as a 11 circular cylinder of anisotropic material in the form of variable porosity. A central feature of the 12 newly-extended method is that the non-homogenous term caused by the complex configuration of the 13 structure is processed by introducing a variable porous-effect parameter G. This leads to the final 14 scaled boundary finite-element equation is still homogenous and can be solved in a similar manner.
The Method of Fundemental Solutions for the Multi-Dimensional Wave Equations
Journal of Marine Science and Technology, 2011
In this paper, a meshless method is developed for solving multi-dimensional wave equations. The proposed method is based on the method of particular solution (MPS), the method of fundamental solutions (MFS) and the Houbolt finite difference (FD) method. The wave equation is considered as a Poisson-type equation with the time-dependent source term. The Houbolt method is applied to avoid the difficult problems for dealing with the initial conditions in forming the linear algebra system. The works of space discretization are dependent on the method of particular solution and the method of fundamental solutions. There are three numerical examples considered in this paper, such as the string vibration and wave vibration problems. Numerical validations have proven that the proposed method is a highly efficient and accurate meshless numerical tool for solving wave equations in engineering and sciences by comparing with analytical solution and other numerical solutions.
Challenge of Hydrodynamic Analysis for a Structure in Waves
2014
Hydrodynamic analysis is one of the key steps in safety assessment of a structure in waves. Many options are available for answering challenge raised from marine and offshore energy industry, from costly three dimensional CFD to the efficient but not perfect boundary element models. Focus on the boundary element methods, analysis methods for the interaction of waves and structures are discussed. Those boundary element models cover frequency domain and time domain, linear and non-linear. Special attention is pay to the problems encountered in those models and approaches we adopted for their engineering solution.
Refraction and diffraction of water waves using finite elements with a DNL boundary condition
A discrete non-local (DNL) boundary condition is used to solve diffraction and refraction water waves problems. The finite elements with a DNL boundary condition are used to solve a wide range of unbounded surface wave problems. Two order low strategies are examined in rectangular and/or circular two-dimensional coordinates system. Numerical studies reveal the advantages of using this numerical approach and its limitations in case of variations of wave number in direction to infinity. Two new procedures to improve the accuracy of DNL boundary in case of significant variations of wave number in the domain are therefore developed. These procedures are based on the addition of a term to the numerical scheme, that collects the error away from the open boundary. Such term can be incorporated into the DNL formula as a source term or as an additional layer. This improvement permits the development of a suitable solution method, which is tested against analytical solutions and other methods, for bi-dimensional water waves problems defined on rectangular or circular geometries. Also, implementation details are reported. Satisfactory numerical results confirm the improvement of DNL method in case of dependent range, which allow us to conclude that the DNL method is an achievable method for the solution of unbounded water waves problems governed by the Helmholtz equation.
Numerical Modeling of the Wave-Plate-Current Interaction by the Boundary Element Method
Fluids
The aim of this work is to propose a numerical study of the interaction of a wave-horizontal plate fixed and completely immersed in a flat-bottomed tank with a uniform current flowing in the same direction as the incident wave. We investigate in particular the effect of the plate at minimizing the impact of the wave on the coast of beaches by studying the free surface elevation and the reflection coefficient, as well as the influence of the various geometrical parameters on the latter, taking into account the presence of the current. The numerical method used in this study is the boundary element method (BEM), and the results obtained will be confronted with experimental and analytical data existing in the literature.