Influence of the wind fields on the accuracy of numerical wave modelling in offshore locations (original) (raw)
Related papers
Influence of Wind Resolution on the Prediction of Waves Generated in an Estuary
Journal of Coastal Research
Estuaries are commonly characterized as coastal environments combining locally generated waves with waves that penetrate from offshore. The present work provides a study on the wave generation and propagation in the Tagus estuary that was carried out by performing simulations with numerical models. For this purpose, SWAN spectral phase averaging wave model was considered. Taking into account its particularities, this model is considered able to estimate adequately the wave conditions in such complex estuarine environment. In order to evaluate the influence of the wind fields on the wave parameters as resulting from the wave model simulations in the target area, several sensitivity experiments have been performed using both uniform and variable wind forcing. Statistical analysis of an eleven-year period of meteorological data (1995-2005), measured at a station located in Lisbon in the neighborhood of the target area, allowed to establish the most representative wind patterns. These w...
Near Real Time Assessment of the Wave Propagation in the Coastal Environment of Portugal
This paper describes the latest research work developed at the Hydrographic Institute of the Portuguese Navy for the implementation of high-resolution numerical models able to achieve a better estimation and prediction of the wave climate in the nearshore of Portugal. As a reference was chosen a phase averaging spectral model (SWAN), which was designated by the most wave prediction programs as the community model. The experiments were performed in two different sites, one is the Pinheiro da Cruz beach, south of Lisbon in the coastal environment of Portugal continental and the other in the southern side of the Porto Santo island, archipelago of Madeira. Using the Matlab environment an original interactive computational tool with functions both for pre and post processing was developed. Besides a better visualisation and analysis, both for the input and the output, the main advantage introduced by this procedure is a significant decreasing of the computational time of the model. In this way, any location can be considered in the phase of post-processing without being imposed 'a priori' as an output request. A special attention was paid to the surf-zone processes and the associated phenomena and infragravity motions, because of the increasing interest of the Portuguese Navy in extrapolating the results delivered by the high-resolution models as an environmental support in military landing operations. In this connection the developed interface is able to provide most of the relevant parameters in the surf-zone as the location and the main characteristics of the breaking line, the type of wave breaking and the number of the wave fronts in the surf.
Strategies in Using Numerical Wave Models in Ocean/Coastal Applications
Journal of Marine Science and Technology
The objective of the present work is to illustrate the performances of the numerical wave models in ocean and coastal environment. Third generation wave models are considered nowadays the most appropriate for such task. These are full spectral models based on the integration on the wave energy (or alternatively wave action) balance equation. In order to cover more aspects related with the modelling process hindcast, nowcast and forecast schemes are discussed and illustrated along six case studies. The major model used was SWAN (acronym for Simulating Waves Nearshore) which is a very flexible model that can be applied in a wide range of coastal applications being effective from high resolution coastal areas up to quasi oceanic scales. In both hindcasts and forecasts the wave forcing was provided by generation models (WAM and WW3), while in nowcast schemes buoy data were used. Various coastal environments that are rather different from the point of view of the bathymetric features and of the characteristics of the environmental matrix were considered. These are the Portuguese continental nearshore with higher resolution sub domains, Madeira Archipelago, the nearshore of Sardinia Island in the Mediterranean Sea and the Black Sea. A general conclusion of this work would be that, despite some limitations, the wave models provide an effective framework in predicting wave conditions in ocean and coastal environment.
Hindcast of the wave conditions along the west Iberian coast
This paper describes the development of a wave prediction system for the west Iberian coast. The implemented wave prediction system is based on two state-of-the-art spectral wave models, WAM for the ocean area and SWAN for the nearshore. However, because of its extended geographical space the SWAN model will include some generation effects in the coarse SWAN simulations, complemented by wave transformation effects near the coast. The system was validated by means of extended hindcast runs in various regions belonging to the continental Portuguese coastal environment, which were compared with buoy data, focusing on the extreme energetic events and both direct comparisons and statistical results are presented.
Renewable Energy, 2009
Some relevant patterns for the wave energy spatial distribution in the Portuguese nearshore are analyzed in this work. A medium term analysis of the wave climate in the target area was first carried out based on recent buoy measurements covering the 10-year period 1994-2003. A wave prediction system based on the two state-of-the-art spectral models, WAM and SWAN, was used to evaluate the wave conditions. In order to design better model configurations, validation tests with this system are performed. Special attention is paid to the whitecapping process which is considered the weak link in deep water wave modelling. The spatial distributions of the wave energy were analysed in three different computational domains for both high and average wave conditions. Four case studies were considered for the wave energy assessments. The first corresponds to a common energetic peak, whereas the other three to different patterns of average energetic conditions. In this way some areas with greater potential from the energetic point of view have been identified.
An operational wave forecasting system for the Portuguese continental coastal area
Proceedings of the Institute of Marine Engineering, Science, and Technology. Journal of operational oceanography
An operational system based on numerical models for wind and wave forecasting in the Portuguese coastal area is presented. It is based on the wave models WAM (WAve prediction Model) and SWAN (Simulating WAves Nearshore),driven by the wind fields provided by the atmospheric models GFS (Global Forecast System) from NCEP (National Centers for Environmental Prediction) and MM5 (Mesoscale Meteorological Model), respectively.The system is operational since October 2008 and runs automat- ically on Linux and Windows environments. Forecast products for four days ahead are produced daily. Graphical outputs of the wave parameters (fields and temporal series) are made available in a restricted domain internet site. The validation of the results provided by the forecasting system is carried out by performing comparisons with both wind and wave measurements.
Three different packages describing the white capping dissipation process, and the corresponding energy input from wind to wave were used to study the surface wave dynamics in South Atlantic Ocean, close to the Brazilian coast. A host of statistical parameters were computed to evaluate the performance of wave model in terms of simulated bulk wave parameters. Wave measurements from a buoy deployed off Santa Catarina Island, Southern Brazil and data along the tracks of Synthetic Aperture Radars were compared with simulated bulk wave parameters; especially significant wave height, for skill assessment of different packages. It has been shown that using a single parameter representing the performance of source and sink terms in the wave model, or relying on data from only one period of simulations for model validation and skill assessment would be misleading. The model sensitivity to input parameters such as time step and grid size were addressed using multiple datasets. The wind data used for the simulation were obtained from two different sources, and provided the opportunity to evaluate the importance of input data quality. The wind speed extracted from remote sensing satellites was compared to wind datasets used for wave modeling. The simulation results showed that the wind quality and its spatial resolution is highly correlated to the quality of model output. Two different sources of wave information along the open boundaries of the model domain were used for skill assessment of a high resolution wave model for the study area. It has been shown, based on the sensitivity analysis, that the effect of using different boundary conditions would decrease as the distance from the open boundary increases; however, the difference were still noticeable at the buoy location which was located 200–300 km away from the model boundaries; but restricted to the narrow band of the low frequency wave spectrum.
Numerical Modeling of the Wave Energy Propagation in the Iberian Nearshore
Energies
In the present work the wave energy propagation patterns in the western side of the Iberian nearshore were evaluated. This assessment takes into account the results provided by a wave modelling system based on spectral phase averaged wave models, which considers subsequent computational domains with increasing resolution towards the coast. The system was previously validated against both in situ measurements and remotely sensed data. Moreover, several data assimilation techniques were implemented as well. In this way, the reliability of the wave predictions was significantly increased. Although extended wave hindcasts have already been carried out close to the Iberian coast of the Atlantic Ocean, including wave energy assessments, they might not be completely accurate because of recent changes in the dynamics of the ocean and coastal wave climate. Thus, the present work considers wave nowcasts that correspond to the most recent and relevant wave energy propagation patterns in the targeted coastal environment. In order to perform this analysis, four different computational levels were considered. The first level corresponds to the sub oceanic domain and it is linked directly to the oceanic wave model, which is implemented over the entire North Atlantic Ocean. The second is related to the coarser computational domains of the coastal areas, while the third relates to the high-resolution domains. These three levels are defined as spherical coordinates (longitude, latitude). Finally, the last computational level includes some coastal areas which have the highest spatial resolution, defined considering the Cartesian coordinates. Moreover, for each level several computational domains have been considered. This work illustrates the most recent and significant wave transformation and energy propagation patterns corresponding to 18 computational domains with various resolutions in the western Iberian coastal environment.
Evaluation of a high-resolution wave forecasting system for the approaches to ports
Ocean Engineering, 2013
The objective of the present work is to analyse the performance of a high-resolution wave forecasting system to provide accurate real time information about the sea states in the neighbourhood of the Portuguese ports. Pre-operational tests with the SWAN model, including calibrations and validations of the results in medium and high resolution areas, were carried out for an eight-month period starting with October 2010. All the three formulations, available in SWAN version 40.81 for wave generation by wind and dissipation by whitecapping, were investigated at various computational levels of the wave modelling system. The results show that the prediction accuracy in the nearshore is considerably improved by including areas with higher resolution, especially in the cases when accurate high resolution bathymetry and wind data are available. From the analysis of the wave statistics against buoy data, the most reliable model system configuration for the continental Portuguese nearshore was designed.
Maritime Engineering and Technology, 2012
An evaluation of the two state of the art high resolution coastal wave models FUNWAVE and REFDIF1, is carried out in the present work. The target area is a coastal sector located in the central part of the Portuguese continental nearshore, south of the city Figueira da Foz. The wave input for the two models is provided by an ADCP and transferred via a coarse REFDIF driver to three high resolution computational domains. Simulations with the models FUNWAVE and REFDIF1 were performed in parallel in these three areas for various wave and tide conditions. The results show in general a good agreement between the two models and the field data outside the surf zone. Inside the surf zone a calibration process is carried out for FUNWAVE and afterwards the results provided by the two models become significantly closer. The present study gives information concerning the performance of the two wave models evaluated in different forcing conditions and also about some specific features concerning the process of wave breaking in the Portuguese nearshore.