Design of Amine-Modified Graft Polyesters for Effective Gene Delivery Using DNA-Loaded Nanoparticles (original) (raw)
Related papers
Journal of Controlled Release, 2006
DNA nano-carriers were formulated relying on biodegradable polyesters consisting of amine-modified poly(vinyl alcohol) (PVAL) backbones grafted with PLGA, based on the Marangoni effect thus avoiding detrimental shear or ultrasonic forces. These amine modified high molecular weight biodegradable polyesters combine specific characteristics, such as electrostatic interactions between DNA and cationic branched polyesters facilitating loading of NP with DNA. The resulting DNA containing NP showed hydrodynamic diameters in the range of 175-285 nm and highly positive ξ-potentials, depending on the nitrogen to phosphate (N/P) ratio used for the particle formation. Atomic force microscopy (AFM) demonstrated well-defined spherical particle morphologies. DNA was released from NP upon incubation in PBS buffer in its intact supercoiled form. Agarose gel electrophoresis demonstrated that DNA within the NP was protected from enzyme degradation. The biological efficiency of the DNA delivery by this nano-carrier was demonstrated by an in vitro transfection assay using four cell lines. Reporter gene delivery of the amine-modified polymers was higher than naked DNA (Control) and raised with increasing degree of amine substitution. Also type of amine and distance of cationic charge from the backbone play an important role. Further, this feature was shown by Luciferase expression of the pCMV-Luc plasmid with PEI 25 kDa/DNA polyplexes and NP prepared with amine modified polyesters with a grafted PLGA chain length of 10 monomers compared at equal N/P ratios. DNA loaded NP from P(68)-10 showed 8× higher transfection efficiencies than the PEI 25 kDa at an N/P ratio of 9 for both preparations. These novel DNA nano-carriers merit further investigations in particular for DNA vaccination under in vivo conditions.
PEGylated Amine-Functionalized Poly(ε-caprolactone) for the Delivery of Plasmid DNA
Materials, 2020
As a promising strategy for the treatment of various diseases, gene therapy has attracted increasing attention over the past decade. Among various gene delivery approaches, non-viral vectors made of synthetic biomaterials have shown significant potential. Due to their synthetic nature, non-viral vectors can have tunable structures and properties by using various building units. In particular, they can offer advantages over viral vectors with respect to biosafety and cytotoxicity. In this study, a well-defined poly(ethylene glycol)-block-poly(α-(propylthio-N,N-diethylethanamine hydrochloride)-ε-caprolactone) diblock polymer (PEG-b-CPCL) with one poly(ethylene glycol) (PEG) block and one tertiary amine-functionalized cationic poly(ε-caprolactone) (CPCL) block, as a novel non-viral vector in the delivery of plasmid DNA (pDNA), was synthesized and studied. Despite having a degradable polymeric structure, the polymer showed remarkable hydrolytic stability over multiple weeks. The optimal...
Iranian Journal of Pharmaceutical Research : IJPR, 2019
Tri-block poly (lactide) poly(ethylene glycol) poly(lactide) (PLA–PEG–PLA) copolymers are among the most attractive nano-carriers for gene delivery into mammalian cells, due to their biocompatibility and biodegradability properties. However, the low efficiency of the gene delivery by these copolymers is an obstacle to gene therapy. Here, we have investigated nanoparticles formulated using the polyethylenimine (PEI) associated with PLA-PEG-PLA copolymer for efficient DNA encapsulation and delivery. PLA-PEG-PLA/DNA and PLA-PEG-PLA/PEI/DNA nanoparticles with different concentrations of PEI were prepared by the double emulsion-solvent evaporation technique. PLA-PEG-PLA/PEI/DNA were characterized for particle size, zeta potential, morphology, biocompatibility, DNA protection, DNA release, and their ability for gene delivery into MCF-7 cells. We found that enhancing the mass ratio of PEI: (PLA-PEG-PLA) (w/w%) in the PLA-PEG-PLA/PEI/DNA nanoparticles results in an increase in particles siz...
The Journal of Gene Medicine, 2008
BackgroundPolyethylenimine (PEI) vectors are widely used in gene delivery because of their high transfection efficiency owing to a unique proton sponge effect. An increase in molecular weight increases transfection efficiency, but simultaneously results in increased toxicity. Therefore, the design and synthesis of new degradable gene delivery carriers having high transfection efficiencies and reduced cytotoxicity are necessary.MethodsIn the present study degradable poly(ester amines) (PEAs) based on glycerol dimethacrylate (GDM) and low molecular weight branched polyethylenimine (LMW‐PEI) were synthesized in anhydrous methanol at 60 °C following Michael addition reaction. The transfection efficiencies of the synthesized PEA/DNA complexes were evaluated using three different cell lines (HeLa, HepG2 and 293T cells) in vitro.ResultsPEAs with zeta potential in the range of 30–55 mV (at physiological pH) condensed plasmid DNA into nanosized particles (<150 nm) suitable for intracellul...
2018
Polymer nanoparticles (NPs) represent one of the most innovative non-invasive approaches for drug delivery applications. NPs main objective is to convey the therapeutic molecule be they drugs, proteins, or nucleic acids directly into the target organ or tissue. Many polymers are used for the synthesis of NPs and among the currently most employed materials several biocompatible synthetic polymers, namely polylactic acid (PLA), poly lactic-co-glycolic acid (PLGA), and polyethylene glycol (PEG), can be cited. These molecules are made of simple monomers which are naturally present in the body and therefore easily excreted without being toxic. The present review addresses the different approaches that are most commonly adopted to synthetize biocompatible NPs to date, as well as the experimental strategies designed to load them with therapeutic agents. In fact, drugs may be internalized in the NPs or physically dispersed therein. In this paper the various types of biodegradable polymer NPs will be discussed with emphasis on their applications in drug delivery. Close attention will be devoted to the treatment of cancer, where both active and passive targeting is used to enhance efficacy and reduce systemic toxicity, and to diseases affecting the central nervous system, inasmuch as NPs can be modified to target specific cells or cross membrane barriers.
Altering Amine Basicities in Biodegradable Branched Polycationic Polymers for Nonviral Gene Delivery
Biomacromolecules, 2010
In this work, biodegradable branched polycationic polymers were synthesized by Michael addition polymerization from different amine monomers and the triacrylate monomer trimethylolpropane triacrylate. The polymers varied in the amount of amines that dissociate in different pH ranges, which are considered to be beneficial to different parts of the gene delivery process. P-DED, a polymer synthesized from trimethylolpropane triacrylate and dimethylethylenediamine, had the highest number of protonated amines that are available for pDNA complexation at pH 7.4 of all polymers synthesized. P-DED formed a positive polyplex (13.9 ± 0.5 mV) at a polymer/plasmid DNA (pDNA) weight ratio of 10:1 in contrast to the other polymers synthesized, which formed positive polyplexes only at higher weight ratios. Polyplexes formed with the synthesized polymers at the highest polymer/ pDNA weight ratio tested (300:1) resulted in higher transfection with enhanced green fluorescent protein reporter gene (5.3 ± 1.0% to 30.6 ± 6.6%) compared to naked pDNA (0.8 ± 0.4%), as quantified by flow cytometry. Polyplexes formed with P-DED (weight ratio of 300:1) also showed higher transfection (30.6 ± 6.6%) as compared to polyplexes formed with branched polyethylenimine (weight ratio of 2:1, 25.5 ± 2.7%). The results from this study demonstrated that polymers with amines that dissociate above pH 7.4, which are available as positively charged groups for pDNA complexation at pH 7.4, can be synthesized to produce stable polyplexes with increased zeta potential and decreased hydrodynamic size that efficiently transfect cells. This work indicated that polymers containing varying amine functionalities with different buffering capabilities can be synthesized by using different amine monomers and used as effective gene delivery vectors.
A biodegradable poly(ester amine) based on polycaprolactone and polyethylenimine as a gene carrier
Biomaterials, 2007
The aim of research was to develop and optimize delivery systems for plasmid DNA (pDNA) based on biodegradable polymers, in particular, poly(ester amine)s (PEAs), suitable for non-viral gene therapy. Poly(ester amine)s were successfully synthesized by Michael addition reaction between polycaprolactone (PCL) diacrylate and low molecular weight polyethylenimine (PEI). PEA/DNA complexes showed effective and stable DNA condensation with the particle sizes below 200 nm, implicating its potential for intracellular delivery. PEAs showed controlled degradation and were essentially non-toxic in all three cells (293 T: Human kidney carcinoma, HepG2: Human hepatoblastoma and HeLa: Human cervix epithelial carcinoma cell lines) at higher doses in contrast to PEI 25 K. PEAs also revealed much higher transfection efficiencies in three cell lines as compared to PEI 25 K. The highest reporter gene expression was observed for PCL/PEI-1.2 (MW 1200) complex having transfection efficiency 15-25 folds higher than PEI 25 K in vitro. Also PEA/DNA complexes successfully transfected cells in vivo after aerosol administration than PEI 25 K. These PEAs can be used as most efficient polymeric vectors which provide a versatile platform for further investigation of structure property relationship along with the controlled degradation, significant low cytotoxicity and high transfection efficiency.
Journal of Biotechnology, 2007
The cationic polylactic acid (PLA) nanoparticle has emerged as a promising non-viral vector for gene delivery because of its biocompatibility and biodegradability. However, they are not capable of prolonging gene transfer and high transfection efficiency. In order to achieve prolonged delivery of cationic PLA/DNA complexes and higher transfection efficiency, in this study, we used copolymer methoxypolyethyleneglycol-PLA (MePEG-PLA), PLA and chitosan (CS) to prepare MePEG-PLA-CS NPs and PLA-CS NPs by a diafiltration method and prepared NPs/DNA complexes through the complex coacervation of nanoparticles with the pDNA. The object of our work is to evaluate the characterization and transfection efficiency of MePEG-PLA-CS versus PLA-CS NPs. The MePEG-PLA-CS NPs have a zeta potential of 15.7 mV at pH 7.4 and size under 100 nm, while the zeta potential of PLA-CS NPs was only 4.5 mV at pH 7.4. Electrophoretic analysis suggested that both MePEG-PLA-CS NPs and PLA-CS NPs with positive charges could protect the DNA from nuclease degradation and cell viability assay showed MePEG-PLA-CS NPs exhibit a low cytotoxicity to normal human liver cells. The potential of PLA-CS NPs and MePEG-PLA-CS NPs as a non-viral gene delivery vector to transfer exogenous gene in vitro and in vivo were examined. The pDNA being carried by MePEG-PLA-CS NPs, PLA-CS NPs and lipofectamine could enter and express in COS7 cells. However, the transfection efficiency of MePEG-PLA-CS/DNA complexes was better than PLA-CS/DNA and lipofectamine/DNA complexes by inversion fluorescence microscope and flow cytometry. It was distinctively to find that the transfection activity of PEGylation of complexes was improved. The nanoparticles were also tested for their ability to transport across the gastrointestinal mucosa in vivo in mice. In vivo experiments showed obviously that MePEG-PLA-CS/DNA complexes mediated higher gene expression in stomach and intestine of BALB/C mice compared to PLA-CS/DNA and lipofectamine/DNA complexes. These results suggested that MePEG-PLA-CS NPs have favorable properties for non-viral gene delivery.
Journal of Biomedical Materials Research Part A, 2010
The major aim of nonviral delivery systems for gene therapy is to mediate high levels of gene expression with low toxicity. Nowadays, one of the most successful synthetic polycations used in gene delivery research is poly(ethylenimine) (PEI) in its high-molecular weight (HMW) branched form. However, PEI is not the ideal transfection agent in vivo because of its overwhelming cytotoxicity. To overcome its toxic effects with a minimal impact on transfection efficiency, PEI has been conjugated with several nonionic biocompatible polymers. Here, we describe the synthesis of nanosized particles consisting of HMW PEI (25 kDa) crosslinked with poly-(e-caprolactone) (PCL, 50-60 kDa), a biodegradable aliphatic polyester. PCL was modified by the insertion of glycidyl groups able to condense with the amines of PEI to chemically bind PEI onto PCL. The nanoparticles obtained have been characterized in relation to their physicochemical and biological properties, and the results are extremely promising in terms of low cell toxicity and high transfection efficiency. These biological effects might be related to the peculiar DNA binding to covalently connected polymeric nanoparticles, without the formation of entangled DNA/polymer-soluble aggregates. V C 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 94A: 619-630, 2010
International journal of pharmaceutics, 2005
Polymer nanoparticles have been used as non-viral gene delivery systems and drug delivery systems. In this study, biodegradable poly(L-lactic acid) (PLA)/polyethylenimine (PEI) and poly(D,L-lactide-co-glycolide) (PLGA)/PEI nanoparticles were prepared and characterized as gene delivery systems. The PLA/PEI and PLGA/PEI nanoparticles, which were prepared by a diafiltration method, had spherical shapes and smooth surface characteristics. The size of nanoparticles was controlled by the amount of PEI, which acted as a hydrophilic moiety, which effectively reduced the interfacial energy between the particle surface and the aqueous media. The nanoparticles showed an excellent dispersive stability under storage in a phosphate-buffered saline solution for 12 days. The positive zeta-potentials for the nanoparticles decreased and changed to negative values with increasing plasmid DNA (pDNA) content. Agarose gel electrophoresis showed that the complex formation between the nanoparticles and the...