Does size matter: a comparison of methods to appraise thermal efficiency of a small house (original) (raw)
Related papers
The Key-Components of Sustainable Housing Design for Australian Small Size Housing
International Journal of GEOMATE
The building industry has a substantial potential for short-run and cost-effective greenhouse gases emission mitigation with long-term positive sustainability impacts. There are, however, a variety of human-based barriers, detracting from the leverage of the mitigation plans in this industry. The impacts of human-based factors are especially critical in the small size residential buildings, whereby a wide range of stakeholders plays serious roles in the housing development. In Australia, one critical human-based factor in the residential sector is the occupants' preferences, increasing substantially diversity and complexity of the dwelling units' physical characteristics. This paper intends to explain the role of feasibility assessment and design process in improving the energy performance of the Australian residential sector. Accordingly, an overview of the Australian housing characteristics assists in addressing the key characteristics of the Australian housing preferences. The analyses show that typological monotony, high range of owneroccupied housing, alongside occupants' affordability are a number of characteristics of the Australian housing, which facilitate the implementation of housing efficiency plans in the early stages of housing provision. Some other characteristics, e.g. floor area, number of bedrooms, and number of people per dwelling units are some inefficient housing preferences, stressing the significant role of designers in encouraging the residents toward efficient choice behaviors. Accordingly, the design process has the potential to impact the energy demands of Australian housing through Housing-Resident Fit, by the implementing the key components of sustainable housing design, impacting the occupants' preferences, and simplifying their domestic activities.
Assessing Australia’s Residential Building Energy Efficiency Regulations
2018
Australia has had minimum energy efficiency regulations for new residential buildings for over a decade. Assessment is undertaken using thermal modelling software that determines the thermal efficiency of the building envelope and awards a star rating out of ten. Despite being in place for many years it is only recently that data has been captured and analysed. This has allowed the ability to assess the effectiveness of the regulations and determine strengths and weaknesses in the assessment process. This paper discusses the initial insights that have been achieved through analysis of the data. Almost 200,000 assessments are in the HStar database, providing insight into how well dwellings are achieving the requirements based on location, dwelling type and dwelling size. Data on construction systems utilised allows analysis of approaches that designers and architects have used to achieve the requirements. This includes building material choices for walls, floors and roofs and insulat...
IMPACT OF THE CLIMATE ON THE DESIGN OF LOW-ENERGY BUILDINGS FOR AUSTRALIA AND REUNION ISLAND
ABSTRACT The work presented in this paper aims to compare two different climates in Australia and Reunion Island and to identify the similarities in terms of bioclimatic design of low energy building. This approach is to perform a real evaluation of the sensation of thermal comfort in the workplace for different climates on the basis of the" bioclimatic chart" developed by Baruch Givoni.
The Significance of Building Design for the Climate
Environmental and Climate Technologies
Building design is important for saving energy and reducing GHG emissions by applying passive solar heating and cooling design principles and using the right materials and appropriate design tools. This will make the home healthier and more comfortable. The design of energy efficient and sustainable buildings is critical for the future. A key aspect of any design is the realistic and accurate prediction of the performance of the building under a wide range of weather conditions. This paper examines the effect of different climate zones in Australia (which are comparable to the world's major climates) on the thermal performance of a complete building and recommended design techniques to suit each climate zone to enhance the overall thermal performance. To examine the effect of the location (different climates) on the overall thermal performance and how a good design in one location may not be suitable at another location, AccuRate will be used to assess the thermal performance fo...
2016
Building physics is a well-established field of knowledge. Still, that is yet to be consistently translated into practice through state-of-the-art performance, exploring the potential of adaptive comfort and passive thermal behaviour to excel in terms of energy sufficiency in a dialogue with the local climate. This is particularly relevant and well suited in temperate climates, where forefront knowledge for the past 40 years shows it is straightforward to build houses offering healthy and comfortable environments with no or very little need for additional heating and, even less, cooling, while also dismissing the need for active systems. This means exploring the building's sufficiency even before caring about the efficiency of possibly unnecessary 'add-on' equipment.
Comfort-based performance assessment methodology for low energy residential buildings in Australia
Building and Environment, 2017
In Australia, the primary method of demonstrating compliance with the mandatory dwelling Energy Efficiency requirements of the National Construction Code (NCC), NatHERS, has been criticised as being unsuitable for assessing low energy houses that are intended to use little or no heating and/or cooling in operation. In 2013-2014, a longitudinal thermal comfort study was conducted in 40 low energy houses in Australia: 20 houses located in a cool temperate climate (Melbourne) and 20 houses located in a hot humid climate (Darwin). The households completed over 6000 thermal comfort vote surveys which were paired with corresponding environmental data collected within the dwellings. Based on this collected data a model describing the thermal preference of these two cohorts was developed. This paper offers an alternative process by which to judge the potential thermal performance of such low energy houses, using the developed comfort criteria as a performance indicator. This alternative approach is aimed at reducing energy use by demonstrating that an acceptable level of comfort can be achieved without the use of heating and/or cooling appliances. The proposed assessment methodology is aimed at providing a more appropriate pathway to NCC Energy Efficiency compliance certification for these types of low energy houses.
2007
New buildings and building refurbishments should be designed such that the best use is made of solar energy, and that fossil fuel based energy is not wasted. Because the thermal processes in a building are quite complex, the use of thermal assessment methods such as dynamic thermal simulation are generally recommended as part of the design process. These methods are intended to show building designers the effects of their building proposals on energy use, but are often too slow and difficult to use and do not really 'fit' into typical design practice. Therefore the job of energy assessment might be given to an engineer, but usually no assessment is done at all, or else the engineer is employed only to 'rubber stamp' the completed design. The method outlined in this paper is intended to give the building designer access to all the information in such a way that at early design stages the thermal characteristics of the building design can be quickly explored, in a parallel way to which designers explore issues of function and use, aesthetics, structure and cost. It is proposed that through use of such a method, considerations of energy and environment can be integrated into each project from the very start of the design process.
Thermal Performance of the Cairnlea Ecohome – A Sustainble House
Procedia Engineering, 2011
Sustainable housing is one of the many pathways to reduce the impacts of climate change. Among developed nations, Australia has made significant progress in this area. Legislative and financial incentives are in place. High quality rating tools were developed to measure and administer legislative requirements. There are a good number of demonstration homes across Australia to promote sustainable housing. The Ecohome was a demonstration home in Melbourne and a part of a multidisciplinary research team looking at sustainability and innovation in outer suburban residential developments. Assessment of thermal performance is a key component of outcomes of a sustainable house. In this emerging field, a set of thermal performance indicators are proposed and may be utilized when outside and inside temperature monitoring data is available. Key indicators include attenuation factor, time lag, percentage time in comfort zone, heating and cooling demand and degrees warmer. The Ecohome at Cairnlea in Melbourne was monitored during 2004 to 2006 for a total period of more than fourteen months. Thermal performance was assessed using these indicators.