Solar Energy for Power Generation: A Review of Solar Radiation Measurement Processes and Global Solar Radiation Modelling Techniques (original) (raw)
Related papers
Study of Solar Radiation in View of Photovoltaic Systems Optimization
Smart Grid and Renewable Energy, 2011
The meteorological data concerning solar radiation are generally not sufficient to allow quantifying all the phenomena which occur when a photovoltaic panel receives solar light. It is therefore, necessary to supplement these data by using astronomical calculation for the sun position and modelling the atmosphere. A simple method to calculate global, diffuse and direct irradiance on vertical and tilted surfaces for all uniform sky conditions (clear sky and overcast sky), developed in Constantine (Algeria) and Louvain-la-neuve (Belgium), has been compared with experimental data obtained at Ghardaia (Algeria). In spite of its simplicity, the method furnishes reasonably good predictions, in comparison with experimental data, and can be proposed as a simplified tool for design purposes. This method relies on the fact that we can calculate the irradiance on a plane with arbitrary orientation and inclination, based on the measurement of a single irradiance value on a reference plane.
Heliyon, 2024
alarming; about 35 % underperformance in solar power generation is observed. The goal of the current study is to minimize this disparity by improving the design models. Considering only cell temperature in the power generation model is responsible for the observed difference in design and operational solar power generated, the present study used a thermocouple to directly measure cell temperature, an anemometer to measure wind speed, and a solar power meter to measure irradiance. These extrinsic factors were used to modify the power generation model based only on cell temperature through the direct correlation of cell temperature, wind speed, and irradiance with solar power generation. Thus, the absence of extrinsic factors (wind speed and irradiance) in the design models is responsible for the colossal drop in solar power generated. Empirically, the missing extrinsic factors were used to transform the implicit solar power model into an explicit model. The development of a solar power generation model, multiple differential models, simulation and experimentation with a pilot solar rig served as alternate model for the prediction of solar power generation. The second-order differential model validated well with empirical solar power generated in Busitema, Mayuge, Soroti, and Tororo study areas based on RMSEs (0.6437, 0.6692, 0.2008, 0.1804, respectively), thus, narrowing the gap between the designed and operational solar power generated. Mayuge and Soroti recorded the highest solar power generation of 9.028 MW compared to Busitema (8.622 MW) and Tororo (8.345 MW), suggesting that it has a conducive site for installing future solar plants. The above results support the use of empirical explicit (triple) and second-order differential models for the design and operation of power plants
Parameterization models for solar radiation and solar technology applications
Energy Conversion and Management, 2008
Solar radiation is very important for the evaluation and wide use of solar renewable energy systems. The development of calibration procedures for broadband solar radiation photometric instrumentation and the improvement of broadband solar radiation measurement accuracy have been done. An improved diffuse sky reference and photometric calibration and characterization software for outdoor pyranometer calibrations are outlined. Parameterizations for direct beam, total hemispherical and diffuse sky radiation and solar radiation technology are briefly reviewed. The uncertainties for various broadband solar radiations of solar energy and atmospheric effects are discussed. The varying responsivities of solar radiation with meteorological, statistical and climatological parameters and possibility atmospheric conditions was examined.
Predicting solar radiation fluxes for solar energy system applications
International Journal of Environmental Science and Technology, 2013
The mean daily global solar radiation flux is influenced by astronomical, climatological, geographical, geometrical, meteorological, and physical parameters. This paper deals with the study of the effects of influencing parameters on the mean daily global solar radiation flux, and also with the computation of the solar radiation flux at the surface of the earth in locations without solar radiation measurements. The reference-real data were borrowed from the Iranian Meteorological Organization. The analysis of data showed that the mean daily solar radiation flux on a horizontal surface is related to parameters such as: mean daily extraterrestrial solar radiation, average daily ratio of sunshine duration, mean daily relative humidity, mean daily maximum air temperature, mean daily maximum dew point temperature, mean daily atmospheric pressure, and sine of the solar declination angle. Multiple regression and correlation analysis were applied to predict the mean daily global solar radiation flux on a horizontal surface. The models were validated when compared with the referencemeasured data of global solar radiation flux. The results showed that the models estimate the global solar radiation flux within a narrow relative error band. The values of mean bias errors and root mean square errors were within acceptable margins. The predicted values of global solar radiation flux by this approach can be used for the design and performance estimation in solar applications. The model can be used in areas where meteorological stations do not exist and information on solar radiation flux cannot be obtained experimentally.
Comparative Study of Solar Radiation Models for the
Comparative Study of Solar Radiation Models for the Estimation of Solar Radiation Using Short-Term Meteorological Data in Lawra, Ghana, 2022
Monthly average daily global solar radiation data are essential for the design and study of solar energy systems. The performance and accuracy of eleven models for the estimation of monthly average global solar radiation were compared in this study. Nineteen months (Nov 2020 – May 2022) ground measurement data consisting of monthly mean daily sunshine duration, relative humidity, minimum and maximum temperatures, and global solar radiation collected from the Lawra Solar Plant were used. The models were compared using statistical indices. According to the indices, most of the models were in reasonably good agreement with the measured data. Two model equations, however, were found to have the highest accuracy and can thus be used to estimate monthly average global solar radiation in Lawra and other places with similar climatic conditions where radiation data is unavailable.
Solar Radiation Fundamentals and PV System Components
Solar Photovoltaic System Applications, 2015
Solar PV technology has emerged as one of the most matured and fast evolving renewable energy technologies and it is expected that it will play a major role in the future global electricity generation mix. Keeping the rapid development of the PV technology into consideration, this chapter systematically documents the evolution of solar PV material as well as the PV applications and PV markets. It also provides insight into the trend in batteries and inverters used for solar PV applications. Furthermore, a comparative analysis of different PV technologies and its development is summarized. The rest of the chapter aims at providing a comprehensive analysis of solar radiation measurement and modelling techniques to assess the availability of solar radiation at different locations. The chapter presents comprehensive information for solar energy engineers, architects and other practitioners.
Study on Impact of Solar Photovoltaic Generation by Atmospheric Variables
Energy is the need for growth of the developing countries like India. It is being one of the largest countries in population and the consumption of the energy is also more in the country. To satisfy the energy demand in the country, SOLAR ENERGY is considered as one of the important components of Renewable energy resources. Theoretically, a high degree of influence exists with different factors like INSOLATION, TEMPERATURE, HUMIDITY, WIND SPEED, AIR PRESSURE etc. on solar photovoltaic (PV) system performance predictability. These are most important and hence the influence of these factors necessarily be considered. The primary objective of the proposed research work is to understand and model the impact of atmospheric variables on the PV power generation. In the present research work, an Artificial Neural network (ANN) model is designed to model the energy output from a 10MW Solar PV power plant. Similarly, for the same power plant an Adaptive Neuro Fuzzy Inference System (ANFIS) model is designed to predict the PV output based on the Insolation values. The present research work considers a feed forward back propagation ANN model which feeds on NINE inputs like GLOBAL HORIZONTAL IRRADIANCE, GLOBAL DIFFUSED IRRADIANCE, AMBIENT TEMPERATURE, PRECIPITATION, AIR PRESSURE, SUNSHINE DURATION, RELATIVE HUMIDITY AND SURFACE TEMPERATURE to the network. A comprehensive dataset comprising 3960 individual data points pertaining to hourly data from 7AM to 6 PM is considered for 365 days. For ANFIS system model, GLOBAL HORIZONTAL IRRADIANCE and GLOBAL DIFFUSED IRRADIANCE are considered as inputs. The ANFIS is trained based on Hybrid optimization approach.
Solar Radiation: Models and Measurement Techniques
2013
In order to grasp the significance of the work accomplished by the author, it is necessary to keep abreast of the present developments in this field. The research work reported in the paper is an attempt to get knowledge to assess the solar energy potential for practical and efficient utilization in India. Our work is centered on estimating realistic values of solar (global and diffuse) radiation on horizontal and tilted surfaces using measured meteorological data and geographical and geometrical parameters for India.
Development of solar photovoltaic model for wide range of operating conditions
International Journal of Power Electronics and Drive Systems (IJPEDS), 2021
Assorted climatic conditions such as irradiation, temperature and shading due to clouds, trees, buildings, communication towers etc. has an unavoidable impact on the output of solar photovoltaic (PV) system. This creates a need for the analytical performance study of solar PV system in changing atmospheric condition in order to design and install an optimized solar PV system for both, stand alone and grid connected. The present work shows the developed PV model in MATLAB codes and simulation is done under varying climate conditions showing change in irradiation and temperature using different arrangements of PV system. PV parameters are obtained in different setup and I-V and P-V characteristics of the developed model of the PV modules are analyzed. A comparative study of the parameters obtained is quite beneficial for an optimized design of the PV system under different atmospheric conditions.