STRUCTURAL ANALYSIS AND REHABILITATION OF II. ARMENIAN CHURCH OF NIGDE (original) (raw)
Related papers
TRADITIONAL STRUCTURAL ELEMENTS IN ÜRGÜP: WALLS AND VAULTS
Ürgüp is a small town of Nevsehir Province located in central Anatolia in Turkey. It is considered the center of region Cappadocia which actually consists of five provinces of Anatolia. The area listed as World Heritage Site since 1985, is attracted with its spectacular natural and built environment. Volcanic eruptions are generated an outstanding landscape in that rural area. Over the time, rain and wind affects are shaped tuff fairy chimneys and rock formations which were used in many ways in order to supply some basic needs and housing requirements. They were carved and designed as spaces to live in and developed with stone masonry structures attached to the rock-cut spaces. Thus a unique vernacular architecture in Ürgüp was generated both by masonry and rock-cut structures.
Material Characterization of Byzantine Period Brick Masonry Walls Revealed in Istanbul (Turkey)
Periodica Polytechnica Civil Engineering, 2016
In this study, the characteristics of mortars and bricks used in the walls of the historical building, which were revealed during the subway station construction excavations, probably belonged to religious place, have been investigated. Results of the analyses indicated that the mortars are hydraulic but they have a low compressive strength and a high porosity. The bricks whatever used as masonry unit or aggregate were produced from calcium rich clay at a firing temperature of 850−900°C, they are of low apparent density, high porosity and relatively high compressive strength, and also show pozzolanic activity.
ORTA ANADOLU ARKEOLOJİ, ANTROPOLOJİ ve SANAT TARİHİ ARAŞTIRMALARI , 2022
Throughout the history of humanity, natural stones have been used in many areas ranging from construction of tools (axes, spears, grinding stones etc.), architecture (homes, castles, temples etc.), arts (decorative stones, mosaics, statues etc.). Hence, even though natural stones fall into the category of geologists, they are also included in the study areas of archeologists, art historians and restorators. The identification of natural stones and source rock is important to conduct proper restoration activities at archeological sites. The deterioration of the stones used in historical structures under atmospheric conditions is possible only possible through the identification of the engineering and mineralogical-petrographic characteristics of the stone. The identification of the type of the natural stone prior to restoration is as important as the identification of the main source from where the stone is obtained. The main subject of the present study was identifying the main source and engineering properties (porosity, hardness, compressive strength and resistance to surface abrasion) of the natural stones used at the Byzantium church located at the Karıncalı Village of Kırşehir province. Three groups of stones (marble, banded marble and schist) have been used in the church. The locations of the source rocks were first identified in the present study. It was determined that the marbles have been acquired from the white colored marbles that are part of the Bozçaldağ Formation located about 3 km southwest of Karıncalı Village and that the banded marbles have been obtained from the banded marbles that are part of the Bozçaldağ Formation located about 200 m northwest of the church. While the schists have been acquired from the schist levels of the Kervansaraydağ Formation on which the foundation of the church has been dug. The changes due to mine production conditions and atmospheric deterioration can be observed clearly when the correlation of the engineering properties of the samples acquired from the structure and the source rock was examined. KEYWORDS: Byzantium, Church, Restoration, Natural Stone, Physical and Mechanical Properties, Anatolia.
2011
Cylindrical rock columns in the Great Mosque in Diyarbakir Old City are investigated for their lithology and architecture. The columns belong to four different rock types, namely pre-Tertiary meta‐ophiolites, Eocene limestones, Miocene limestones and Plio-Quaternary basalts. The columns from the first three lithologies are reused during the construction and/or renovation of the Great Mosque. Thin sections prepared from 18 columns of this building confirm they are derived from the rocks exposed in the region. The reuse of the columns is approved by inconsistent column lengths, multi‐segment column shafts, lithologically mixed columns and presence of thin wedges at the bottom of column bases. These columns are not used to support the main body but rather either for partial support or only for decorative reasons.
2015
The Armenian central dome churches with cruciform plan, as complete architectural setups, emerged in the seventh century or perhaps earlier and did not change their initial construction for nearly 1,500 years. The reason is the national spiritual philosophy and the mythology of the Indo-European civilization, carrier of which as an important component of culture to this day is the Armenian people. From the architectural point of view, rock carved versions of this type of churches are convincing and irreproachable, with the semantic characteristics of the mythological tree of life, the bowels of the earth-earth-sky trinity, black and white world-creating and world-destroying forces in the form of dragons and the cross as a symbol of light.
Investigation of the masonry pillars of a modernist building of Hospital de sant Pau, Barcelona
The methodology employed and the results obtained from an experimental campaign to determine the compressive strength of a masonry pillar extracted from an early 20 th century building are presented. The samples of the pillar were extracted from a structure located in the Hospital de Sant Pau modernist complex. The pillars analyzed are characterized by a circular section of a diameter of 60 cm, and are composed of clay bricks and, instead of the more common lime based mortars, Portland cement as a binder. The pillars show a complex interior morphology including an outer layer of regular masonry in combination with an internal core composed of an irregular mix of mortar and brick portions. The material, geometrical and structural typology of the pillars investigated are fairly representative of the pillars encountered throughout the hospital complex, therefore making the determination of its capacity of wide interest for the structural study of several adjacent buildings. The experimental campaign was planned and performed with the purpose of determining the compressive strength and elastic properties the masonry pillar under cyclic and monotonic concentric loading. The campaign included several tests on entire portions of the pillar measuring a height of 100 cm. It also included a detailed characterization of the mechanical properties of the constituent materials and masonry samples including one or more mortar joints. The ultimate load obtained from the pillar test is compared to the service and design loads. Comparisons are also drawn between the compressive strength obtained from the pillar test and from tests performed on sampled masonry specimens. The effects of existing damage, which is extensive in the pillars, and overall structural arrangement are also discussed.
Seismic Behavior of Ottoman Empire Classical Period Stone Masonry Walls
A large number of the historical structures in Turkey are under high seismic risks. Since the knowledge on the traditional masonry walls and masonry constituents of the historical structures in Turkey is scarce, particularly from the structural engineering perspective, this study intends to enlarge the experimental data concerning the behavior of the Ottoman period multi-leaf stone masonry walls under cyclic in-plane loads that represent the seismic effects. For this purpose, four stone masonry walls, representative of the investigated wall typology, were constructed with similar materials and construction techniques. A well-known local limestone (Küfeki limestone), widely used in ancient structures in Istanbul, was utilized during the construction of the wall members with dry joints. The Küfeki units were interconnected to each other via metal cramps as also done in the past practice. The main parameter of the tests was the level of pre-compression stress that was kept constant dur...