Design of Low-cost Autonomous Water Quality Monitoring System (original) (raw)
Related papers
A demonstration of wireless sensing for long term monitoring of water quality
2009
At a time when technological advances are providing new sensor capabilities, novel network capabilities, long-range communications technologies and data interpreting and delivery formats via the World Wide Web, we never before had such opportunities to sense and analyse the environment around us. However, the challenges exist. While measurement and detection of environmental pollutants can be successful under laboratory-controlled conditions, continuous in-situ monitoring remains one of the most challenging aspects of environmental sensing. This paper describes the development and test of a multi-sensor heterogeneous real-time water monitoring system. A multi-sensor system was deployed in the River Lee, County Cork, Ireland to monitor water quality parameters such as pH, temperature, conductivity, turbidity and dissolved oxygen. The R. Lee comprises of a tidal water system that provides an interesting test site to monitor. The multi-sensor system set-up is described and results of the sensor deployment and the various challenges are discussed.
Sustainable Environment Research
In this paper, a low cost, real-time water quality monitoring system which can be applied in remote rivers, lakes, coastal areas and other water bodies is presented. The main hardware of the system consists of off-the-shelf electrochemical sensors, a microcontroller, a wireless communication system and the customized buoy. It detects water temperature, dissolved oxygen and pH in a pre-programmed time interval. The developed prototype disseminates the gathered information in graphical and tabular formats through a customized web-based portal and preregistered mobile phones to better serve relevant end-users. To check the system effectivity, the buoy's stability in harsh environmental conditions, system energy consumption, data transmission efficiency and webbased display of information were carefully evaluated. The experimental results prove that the system has great prospect and can be practically used for environmental monitoring by providing stakeholders with relevant and timely information for sound decision making.
Development of Wireless Passive Water Quality Catchment Monitoring System
Journal of Telecommunication, Electronic and Computer Engineering, 2018
To maintain the quality of aquatic ecosystems, good water quality is needed. The quality of water needs to be tracked in real-time for environmental protection and tracking pollution sources. This paper aims to describe the development and data acquired for water catchment quality monitoring by using a passive system which includes location tagging. Wireless Passive Water Quality Catchment Monitoring (WPWQCM) System is used to check and monitor water quality continuously. The condition of water in terms of acidity, temperature and light intensity needs to be monitored. WPWQCM System featured four sensors which are a temperature sensor, light intensity sensor, pH sensor and GPS tracker that will float in water to collect the data. GPS tracker on passive water catchment monitoring system is a new feature in the system where the location of water can be identified. With the extra feature, water quality can be mapped and in the future, the source of disturbance can be determined. UMP La...
IET Science, Measurement & Technology, 2014
The challenges of climate change, population growth, demographic change, urbanization and resource depletion mean that the world's great cities need to adapt to survive and thrive over the coming decades. Slashing greenhouse gas emissions to prevent catastrophic climate change, while maintaining or increasing quality of life, can be a costly and difficult process. Two factors that directly affect the life quality in the XXI century cities are the water and air quality that can be monitored using the combination of low cost sensing modules, machine to machine (M2M) and internet of things (IoT) technologies. In this context, this study presents a wireless sensor network architecture that combines low cost sensing nodes and a low cost multiparameters sensing probe for reliable monitoring of water quality parameters of surface waters (lakes, estuaries and rivers) in urban areas. A particular attention is dedicated to the design of the conductivity, temperature and turbidity signal conditioning circuits, highlighting important issues related to linearisation, measuring dynamic range and low-cost implementation by using commercial off-the-shelf components and devices. Several issues related to the wireless sensor network implementation are included in this study, as well as several simulation and experimental results.
A Reliable Wireless System for Water Quality Monitoring and Level Control
Network Protocols and Algorithms, 2016
With the ever increasing growth in population water quality monitoring has become a critical issue in the recent years. Water quality monitoring is very important for aquaculture, waste water management, drinking water treatment, water distribution system, and other environmental applications. Recently numerous researchers have been initiated to build wireless system for water quality monitoring (WSWQM). The two fold objectives of WSWQM are (a) monitoring water quality from a remote location with minimum supervision, and (b) initiating immediate corrective actions to maintain the required water quality standard. In this paper we present a system model for WSWQM. In this system we integrate sensors, transmitters, receivers, myRIO microcontroller, and IEEE 802.11 Wi-Fi technology. The sensors generate water quality data including pH, conductivity, and temperature. The real-time data are then sent wirelessly to a local control unit for analyzing, recording, and displaying. The system is also able to send alarm messages automatically to a remote management center when water quality falls below the required standard. In order to ensure high accuracy and reliability we use industry standard sensors and instrument to implement this system.
Wireless Sensor Networks For Water Quality Monitoring: Prototype Design
2016
This paper is devoted to present the advances in the design of a prototype that is able to supervise the complex behavior of water quality parameters such as pH and temperature, via a real-time monitoring system<em>.</em> The current water quality tests that are performed in government water quality institutions in Mexico are carried out in problematic locations and they require taking manual samples. The water samples are then taken to the institution laboratory for examination. In order to automate this process, a water quality monitoring system based on wireless sensor networks is proposed. The system consists of a sensor node which contains one pH sensor, one temperature sensor, a microcontroller, and a ZigBee radio, and a base station composed by a ZigBee radio and a PC. The progress in this investigation shows the development of a water quality monitoring system. Due to recent events that affected water quality in Mexico, the main motivation of this study is to add...
International Journal of Advanced Computer Science and Applications
Sustainable development associated with the agricultural field of Arequipa, a region in economic growth, is vulnerable to contamination of water resources, putting production systems and food security at risk. Therefore, it is necessary to implement an automated system to control, management, and monitor this vital resource. The proposed work proposed a system to measure water quality monitoring in reservoirs and lakes with high accurate related to global positioning. It includes an embedded computer, multiparameter sonde, and an additional dual GNSS/INS in hardware architecture. The software architecture is fully open-source with compatibility, modularity, and interoperability features between Python and MySQL, allowing data management for real-time data in visual interface on a platform that stores unlimited data logging, monitors and analyzes. The proposed system is validated in an experimental test that measures the water quality of a huge agricultural reservoir, where certified instrumentation is mandatory, as compared to other methods used locally for this action.
Design and Implementation of a Low-Cost Portable Water Quality Monitoring System
Computers, materials & continua, 2021
Water is one of the needs with remarkable significance to man and other living things. Water quality management is a concept based on the continuous monitoring of water quality. The monitoring scheme aims to accumulate data to make decisions on water resource descriptions, identify real and emergent issues involving water pollution, formulate priorities, and plan for water quality management. The regularly considered parameters when conducting water quality monitoring are turbidity, pH, temperature, conductivity, dissolved oxygen, chemical oxygen demand, biochemical oxygen demand, ammonia, and metal ions. The usual method employed in capturing these water parameters is the manual collection and sending of samples to a laboratory for detection and analysis. However, this method is impractical in the long run because it is laborious and consumes a considerable amount of human resources. Sensors integrated into a mobile phone application interface can address this issue. This paper aims to design and implement an Internet of Things-based system comprising pH, temperature, and turbidity sensors, which are all integrated into a mobile phone application interface for a water monitoring system. This project utilizes the Bluetooth Standard (IEEE 802.15.1) for communication/transfer of data, while the water quality monitoring system relies on the pH, turbidity, and temperature of the test water.
Water Quality Monitoring Using Wireless Sensor Networks
ACM Transactions on Sensor Networks, 2017
Water is essential for human survival. Although approximately 71% of the world is covered in water, only 2.5% of this is fresh water; hence, fresh water is a valuable resource that must be carefully monitored and maintained. In developing countries, 80% of people are without access to potable water. Cholera is still reported in more than 50 countries. In Africa, 75% of the drinking water comes from underground sources, which makes water monitoring an issue of key concern, as water monitoring can be used to track water quality changes over time, identify existing or emerging problems, and design effective intervention programs to remedy water pollution. It is important to have detailed knowledge of potable water quality to enable proper treatment and also prevent contamination. In this article, we review methods for water quality monitoring (WQM) from traditional manual methods to more technologically advanced methods employing wireless sensor networks (WSNs) for in situ WQM. In part...