EXPERIMENTAL AND NUMERICAL INVESTIGATION ON FLEXURAL BEHAVIOR OF HIGH STRENGTH REINFORCED CONCRETE BEAM (original) (raw)
Related papers
Flexural Behaviour of Reinforced High Performance Concrete Beams Subjected to Bending
This paper presents the findings of the comprehensive experimental investigation on the use of industrial by-products like silica fume, bottom ash and steel slag aggregate for making reinforced high performance concrete beams for enhancing the flexural strength. Based on the encouraging results of the preliminary experimental work conducted by the authors, a comprehensive experimental investigation was carried out by testing ten numbers of RC beams with varying mix ratio of industrial by-products in order to further explore the viability of this technique. Data presented include the parameters such as load-deflection behaviour, moment-curvature relationship, ductility and energy absorption capacity. A reinforced high performance concrete beam proves to be effective at controlling cracks and exhibits ductility with a ductility ratio. The investigation revealed that the flexural behaviour of reinforced high performance concrete beams was comparable to that of control beams. The results of this study provide valuable data that can be used in further studies on the development of computational models of the deflection and flexural of HPC.
Journal of Sustainable Engineering: Proceedings Series, 2019
This paper discusses and reports based on the experimental investigation of the flexural ductility of singly reinforced normal strength and high strength concrete beams. Compressive concrete strength of 40 and 95 MPa were employed to create singly reinforced normal strength and high strength concrete beams, respectively. Fourteen samples made of normal and high strength concrete were engaged to observe the flexural ductility behaviour of beams on the basis of four point bend testing. Analysis on the basis of the flexural cracking, ultimate failure and curvature ductility were carried out to derive the comparison of singly reinforced normal strength and high strength beams. The beams using high strength concrete revealed a higher ductility ratio than that of normal strength concrete, i.e. 4.50 for high strength concrete and 2.60 for normal strength concrete.
IJERT-Experimental and Analytical Study on High Strength Concrete Beams under Flexure
International Journal of Engineering Research and Technology (IJERT), 2015
https://www.ijert.org/experimental-and-analytical-study-on-high-strength-concrete-beams-under-flexure https://www.ijert.org/research/experimental-and-analytical-study-on-high-strength-concrete-beams-under-flexure-IJERTV4IS070154.pdf This paper presents the experimental program designed to study the fundamental characteristics of High Strength Concrete and flexural behaviour of simply supported high strength concrete beams under two point loading. The use of High Strength Concrete results in reduced dead loads in large span and taller structures. The current experimental study consists of casting 108 plain cement concrete specimenswhich includes cubes, beams and cylinders of grades M30, M60, M70 and M80. These specimens are tested for compressive strength and flexural strength over a period of 28 days, 56 days and 90 days. The results obtained from the tests on High Strength Concrete are compared with that of M30 grade plain cement concrete. The variables considered in this investigation were mainly the strength of concrete (60 MPa to 80 MPa) and the age of specimen. The specimens were analysed for ultimate load using the finite element software Robot Structure Analysis.
Engineering properties and structural behaviour of high strength reinforced concrete beams
1997
High Strength Concrete (HSC) has become a viable alternative to lower strength concrete. However, its utilisation is increasing faster than the development of suitable design recommendations. This is because limited and diverse investigations have been carried out concerning engineering properties and structural behaviour of HSC. The experimental investigation and theoretical considerations described in this thesis have been undertaken as an attempt to start to remedy this problem. As part of the investigation into the structural behaviour of HSC beams, a series of 18 different concrete mixes were tested in order to optimise HSC mixes using local aggregates. The effect o f different factors such as w/c ratios, silica fume and superplasticizer dosages on compressive strength and splitting tensile strengths in the range of 80 to 120 N/mm2 (MPa) were studied. Additionally, new mathematical expressions were developed to replace some of the currently used relationships concerning HSC as ...
Nominal flexural strength of high-strength concrete beams
Advances in concrete construction, 2019
The conventional ACI rectangular stress block is developed on the basis of normal-strength concrete column tests and it is still being used for the design of high-strength concrete members. Many research papers found in the literature indicate that the nominal strength of high-strength concrete members appears to be over-predicted by the ACI rectangular stress block. This is especially true for HSC columns. The general shape of the stress-strain curve of high-strength concrete becomes more likely as a triangle. A triangular stress block is, therefore, introduced in this paper. The proposed stress block is verified using a database which consists of 52 tested singly reinforced high-strength concrete beams having concrete strength above 55 MPa (8,000 psi). In addition, the proposed model is compared with models of various design codes and proposals of researchers found in the literature. The nominal flexural strengths computed using the proposed stress block are in a good agreement with the tested data as well as with that obtained from design codes models and proposals of researchers.
Engineering Failure Analysis, 2014
For many years, high-strength concrete (HSC) has been used in high-rise buildings and bridges. The primary reasons for selecting HSC are to produce a more economical product, provide a feasible technical solution, or a combination of both. Despite a lot of advantages in the usage of HSC, it exhibits a brittle failure in comparison with normal strength concrete (NSC). For a comprehensive discussion on the failure of HSC beams, a total of six full scale reinforced HSC beams have been designed based on ACI code provisions and cast with compressive strength in the range of 65 MPa 6 f 0 c 6 75 MPa and tested under two-point top loading. The general behaviour of tested beams has been investigated with observation on mid span deflection, failure mode and crack growth. Increase of the tensile reinforcement ratio results in more cracks but with lower height and width. The linear graphs between the applied load and corresponding deflection or curvature in reinforced HSC beams showed that the behaviour of these beams is elastic and any increase in the tensile reinforcement ratio results in an increase in the ultimate load too. The moment-curvature graph and load-deflection curve started with an initial elastic response followed by an inelastic behaviour that appears with a gradual decrease in stiffness till the ultimate moment is reached.
Improving flexural ductility of high-strength concrete beams
Proceedings of the ICE - Structures and Buildings, 2006
With the advent of advanced mineral and chemical admixtures, the strength level of concrete has been raised dramatically and high-strength concrete (HSC) is becoming more and more commonly used. However, HSC is generally more brittle than normal strength concrete. In fact, it has been shown that the use of HSC, if not properly controlled, could significantly reduce the flexural ductility of reinforced concrete beams. Herein, it is proposed to compensate for the reduction in flexural ductility owing to the use of HSC by adding compression and confining reinforcements. A parametric study based on complete moment–curvature analysis of beam sections made of different grades of concrete and provided with different amounts of tension, compression and confining reinforcements has been carried out to evaluate the increases in flexural ductility achievable by adding compression and confining reinforcements. From the numerical results, the compression and/or confining reinforcements needed to...