Elastoplastic Properties of Micro- and Submicrocrystalline Metals and Alloys (original) (raw)
Related papers
Linear Versus Nonlinear Acoustic Probing of Plasticity in Metals: A Quantitative Assessment
2018
The relative dislocation density of aluminum and copper samples is quantitatively measured using linear Resonant Ultrasound Spectroscopy (RUS). For each metallic group, four samples were prepared with different thermomechanical treatments in order to induce changes in their dislocation densities. The RUS results are compared with Nonlinear Resonant Ultrasound Spectroscopy (NRUS) as well as Second Harmonic Generation (SHG) measurements. NRUS has a higher sensitivity by a factor of two to six and SHG by 14% to 62%. The latter technique is, however, faster and simpler. As main a result we obtain a quantitative relation between the changes in the nonlinear parameters and the dislocation density variations, which in a first approximation is a linear relation between these differences. We also present a simple theoretical expression that explains the better sensitivity to dislocation content of the nonlinear parameters with respect to the linear ones. X-Ray diffraction measurements, altho...
Micron-scale deformation: a coupled in-situ study of strain bursts and acoustic emission
arXiv (Cornell University), 2016
Plastic deformation of micron-scale crystalline materials differ considerably from bulk ones, because it is characterized by random strain bursts. To obtain a detailed picture about this stochastic phenomenon, micron sized pillars have been fabricated and compressed in the chamber of a SEM. An improved FIB fabrication method is proposed to get non-tapered micro-pillars with a maximum control over their shape. The in-situ compression device used allows high accuracy sample positioning and force/displacement measurements with high data sampling rate. The collective avalanche-like motion of dislocations appears as stress drops on the stress-strain curve. To confirm that these stress drops are directly related to dislocation activity, and not to some other effect, an acoustic emission transducer has been mounted under the sample to record emitted acoustic activity during strain-controlled compression tests of Al-5% Mg micro-pillars. The correlation between the stress drops and the acoustic emission signals indicates that indeed dislocation avalanches are responsible for the stochastic character of the deformation process.
Physical Review E, 2013
Various dynamical systems with many degrees of freedom display avalanche dynamics, which is characterized by scale invariance reflected in power-law statistics. The superposition of avalanche processes in real systems driven at a finite velocity may influence on the experimental determination of the underlying power law. The present paper reports results of investigation of this effect using the example of acoustic emission (AE) accompanying plastic deformation of crystals. Indeed, recent studies of AE did not only prove the dynamics of crystal defects obeys power-law statistics, but also led to a hypothesis of universality of the scaling law. We examine the sensitivity of the apparent statistics of AE to the parameters applied to individualize AE events. Two different alloys, MgZr and AlMg, both displaying strong AE but characterized by different plasticity mechanisms are investigated. It is shown that the power-law indices display a good robustness in wide ranges of parameters even in the conditions leading to very strong superposition of AE events, although some deviations from the persistent values are also detected. The totality of the results confirms the scaleinvariant character of deformation processes on the scale relevant to AE, but uncovers essential differences between the power-law exponents found for two kinds of alloys.
Scripta Materialia, 2019
Considering acoustic emission (AE) as a phenomenon reflecting the elastic energy dissipation process in deforming metals, a simple yet self-consistent model is proposed to account for the AE behaviour accompanying microstructure evolution during uniform plastic deformation of metals. The relationship between the AE power, mobile dislocation density and plastic flow characteristic parameters-the strain hardening rate and flow stress-is derived and experimentally verified for face centred cubic metals with different stacking fault energies (SFE). Despite its simplicity, the proposed purely phenomenological relation captures most of the salient features of the AE behaviour of early deformation stages in metals.
Materials Science and Engineering A-structural Materials Properties Microstructure and Processing, 2009
Systematic nonlinear ultrasonic (NLU) studies using longitudinal and guided surface acoustic waves (SAW) were conducted on AA7175-T735 aluminum alloy specimens that were plastically deformed to varying levels of residual strain. The variation of nonlinear ultrasonic (NLU) parameter (A 2 /A 2 1 ) as a function of residual plastic deformation, suggests an increase in NLU parameter at a slow rate up to a certain level of deformation and thereafter there is a significant increase in NLU parameter with further increase in the strain level. X-ray diffraction methods to characterize line broadening and etch pit dislocation distribution studies suggest that the smaller rate of increase in NLU parameter could be due to the increase in the dislocation density and higher rate of increase could be caused by formation of cellular dislocation pattern. Thus, our study shows that it is possible to study the two stage dislocation dynamics observed during residual plastic deformation of Al alloy 7175-T7351 using nonlinear ultrasonic technique.
Ultrasound as a probe of dislocation density in aluminum
Acta Materialia, 2012
Dislocations are at the heart of the plastic behavior of crystalline materials yet it is notoriously difficult to perform quantitative, non-intrusive, measurements of their single or collective properties. Dislocation density is a critical variable that determines dislocation mobility, strength and ductility. On the one hand, individual dislocations can be probed in detail with transmission electron microscopy. On the other hand, their collective properties must be simulated numerically.
Influence of Precipitates and Dislocations on the AcousticNonlinearity in Metallic Materials
Journal of the Korean Physical Society, 2009
The influence of precipitates and dislocations on the acoustic nonlinearity was investigated in isothermally aged ferritic CrMo steel and low cycle fatigued copper. The variation in the normalized acoustic nonlinearity parameter (β/β0) was interpreted as resulting from microstructural changes supported by the electron microscopy. The β/β0 of CrMo steel increased abruptly in the initial stage of degradation, and then changed little due to the coarsening of carbide and precipitation of stable M 6 C carbide during isothermal aging. Due to the evolution of dislocation cell substructure, the β/β0 of copper increased with the fatigue cycles. These experimental results are illustrated that the acoustic nonlinearity is severely affected by the lattice strain caused by precipitates and dislocations.
Materials Science Forum, 2006
A two-level homogenisation approach is applied to the micro-mechanical modelling of the elasto-plasticity of polycrystalline materials during various strain-path changes. The model is tested by simulating the development of intragranular strains during different complex loads. Mechanical tests measurements are used as a reference in order to validate the model. The anisotropy of plastic deformation in relation to the evolution of the dislocation structure is analysed. The results demonstrate the relevance of this approach for FCC polycrystals.
Ultrasound as a Probe of Plasticity? The Interaction of Elastic Waves with Dislocations
International Journal of Bifurcation and Chaos, 2009
An overview of recent work on the interaction of elastic waves with dislocations is given. The perspective is provided by the wish to develop non-intrusive tools to probe plastic behavior in materials. For simplicity, ideas and methods are first worked out in two dimensions, and results in three dimensions are then described. These results explain a number of recent, hitherto unexplained, experimental findings. The latter include the frequency dependence of ultrasound attenuation in copper, the visualization of the scattering of surface elastic waves by isolated dislocations in LiNbO3, and the ratio of longitudinal to transverse wave attenuation in a number of materials.
In situ monitoring of dislocation proliferation during plastic deformation using ultrasound
International Journal of Plasticity, 2017
Ultrasound has long been used as a non-destructive tool to test for the brittle fracture of materials. Could it be used as a similar tool to test for ductile failure? As a first step towards answering this question, we report results of local measurements of the speed of transverse waves in aluminum under standard testing conditions at two different probe locations and continuously as a function of applied load. The result, as expected, is independent of stress in the elastic regime, but there is a clear change, consistent with a proliferation of dislocations, as soon as the yield strength is reached. We use a model that blames the change in wave speed on the interaction of elastic waves with oscillating dislocation segments, which quantitatively relates the change in wave velocity with dislocation density Λ and segment length L, thus obtaining a continuous relation between dislocation density and externally applied stress. We took off samples from the probe before, at intermediate, and high loading, and we measured their dislocation density using standard X-ray diffraction and Transmission Electron Microscopy techniques. The results agree well with the acoustic measurements, and the relation between stress and dislocation density is consistent with the Taylor rule. This indicates that monitoring the speed of transverse waves could become a useful diagnostic of dislocation density for metallic pieces in service as well as a tool to test models of plastic behavior.