The Role of Water in Mediating Interfacial adhesion and shear strength in graphene oxide (original) (raw)
Graphene oxide (GO), whose highly tunable surface chemistry enables the formation of strong interfacial hydrogen-bond networks, has garnered increasing interest in the design of devices that operate in the presence of water. For instance, previous studies have suggested that controlling GO's surface chemistry leads to enhancements in interfacial shear strength, allowing engineers to manage deformation pathways and control failure mechanisms. However, these previous reports have not explored the role of ambient humidity and only offer extensive chemical modifications to GO's surface as the main pathway to control GO's interfacial properties. Herein, through atomic force microscopy experiments on GO−GO interfaces, the adhesion energy and interfacial shear strength of GO were measured as a function of ambient humidity. Experimental evidence shows that adhesion energy and interfacial shear strength can be improved by a factor of 2−3 when GO is exposed to moderate (∼30% water weight) water content. Furthermore, complementary molecular dynamics simulations uncovered the mechanisms by which these nanomaterial interfaces achieve their properties. They reveal that the strengthening mechanism arises from the formation of strongly interacting hydrogen-bond networks, driven by the chemistry of the GO basal plane and intercalated water molecules between two GO surfaces. In summary, the methodology and findings here reported provide pathways to simultaneously optimize GO's interfacial and in-plane mechanical properties, by tailoring the chemistry of GO and accounting for water content, in engineering applications such as sensors, filtration membranes, wearable electronics, and structural materials.
Sign up for access to the world's latest research.
checkGet notified about relevant papers
checkSave papers to use in your research
checkJoin the discussion with peers
checkTrack your impact
Related papers
Doping-Induced Tunable Wettability and Adhesion of Graphene
Nano letters, 2016
We report that substrate doping-induced charge carrier density modulation leads to the tunable wettability and adhesion of graphene. Graphene's water contact angle changes by as much as 13° as a result of a 300 meV change in doping level. Upon either n- or p-type doping with subsurface polyelectrolytes, graphene exhibits increased hydrophilicity. Adhesion force measurements using a hydrophobic self-assembled monolayer-coated atomic force microscopy probe reveal enhanced attraction toward undoped graphene, consistent with wettability modulation. This doping-induced wettability modulation is also achieved via a lateral metal-graphene heterojunction or subsurface metal doping. Combined first-principles and atomistic calculations show that doping modulates the binding energy between water and graphene and thus increases its hydrophilicity. Our study suggests for the first time that the doping-induced modulation of the charge carrier density in graphene influences its wettability and...
Engineering the Mechanical Properties of Monolayer Graphene Oxide at the Atomic Level
The mechanical properties of graphene oxide (GO) are of great importance for applications in materials engineering. Previous mechanochemical studies of GO typically focused on the influence of the degree of oxidation on the mechanical behavior. In this study, using density functional-based tight binding simulations, validated using density functional theory simulations, we reveal that the deformation and failure of GO are strongly dependent on the relative concentrations of epoxide (−O−) and hydroxyl (−OH) functional groups. Hydroxyl groups cause GO to behave as a brittle material; by contrast, epoxide groups enhance material ductility through a mechanically driven epoxide-to-ether functional group transformation. Moreover, with increasing epoxide group concentration, the strain to failure and toughness of GO significantly increases without sacrificing material strength and stiffness. These findings demonstrate that GO should be treated as a versatile, tunable material that may be engineered by controlling chemical composition, rather than as a single, archetypical material.
ACS Nano, 2012
The mechanical properties of pristine graphene oxide paper and paper-like films of polyvinyl alcohol (PVA)-graphene oxide nanocomposite are investigated in a joint experimentalÀ theoretical and computational study. In combination, these studies reveal a delicate relationship between the stiffness of these papers and the water content in their lamellar structures. ReaxFF-based molecular dynamics (MD) simulations elucidate the role of water molecules in modifying the mechanical properties of both pristine and nanocomposite graphene oxide papers, as bridge-forming water molecules between adjacent layers in the paper structure enhance stress transfer by means of a cooperative hydrogen-bonding network. For graphene oxide paper at an optimal concentration of ∼5 wt % water, the degree of cooperative hydrogen bonding within the network comprising
Hydrophilic behavior of graphene and graphene-based materials
The Journal of Chemical Physics, 2015
Graphene and the graphene-based materials like graphite, carbon nanotubes, and fullerenes are not only usually regarded as hydrophobic but also have been widely employed as paradigms for the investigation of the behavior of water under nonpolar confinement, a question of major concern for fields ranging from biology to materials design. However, some experimental and theoretical insights seem to contradict, at least partially, such a picture. In this work, we will provide firm evidence for a neat hydrophilic nature of graphene surfaces. Our molecular dynamics studies will demonstrate that parallel graphene sheets present a strong tendency to remain fully hydrated for moderately long times (even when the equilibrium state is indeed the collapse of the plates), and thus, they are less prone to self-assembly than model hydrophobic surfaces we shall employ as control which readily undergo a hydrophobic collapse. Potential of mean force calculations will indeed make evident that the solv...
Physical chemistry chemical physics : PCCP, 2018
The surface wettability of graphite has gained a lot of interest in nanotechnology and fundamental studies alike, but the types of adsorptions that dominate its time resolved surface property variations in ambient environment are still elusive. Prediction of the intrinsic surface wettability of graphite from first-principles simulations offers an opportunity to clarify the overall evolution. In this study, by combining experimental temporal Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and static contact angle measurements with density functional theory (DFT)-predicted contact angles and DFT AFM force simulations, we provide conclusive evidence to demonstrate the role played by water adsorption in the evolution of surface properties of aged graphite in ambient air. Moreover, this study has the merit of linking DFT-predicted adhesive energy at the solid/liquid interface and cohesive energy at the liquid/liquid interface with the DFT AFM-predicted force of ad...
The Role of Intercalated Water in Multilayered Graphene Oxide
ACS Nano, 2010
A detailed in situ infrared spectroscopy analysis of single layer and multilayered graphene oxide (GO) thin films reveals that the normalized infrared absorption in the carbonyl region is substantially higher in multilayered GO upon mild annealing. These results highlight the fact that the reduction chemistry of multilayered GO is dramatically different from the single layer GO due to the presence of water molecules confined in the ϳ1 nm spacing between sheets. IR spectroscopy, XPS analysis, and DFT calculations all confirm that the water molecules play a significant role interacting with basal plane etch holes through passivation, via evolution of CO 2 leading to the formation of ketone and ester carbonyl groups. Displacement of water from intersheet spacing with alcohol significantly changes the chemistry of carbonyl formation with temperature.
This paper describes a systematic study on the nanoscale toughening of monolayer graphene oxide (GO) by an ultra-thin polymer adlayer, which impedes the propagation of cracks during intraplanar fracture. Using molecular dynamics simulations, the crack-bridging capabilities of a library of five hydrogenbonding-capable polymers are explored against an epoxide-rich GO substrate. The best crack-bridging effect is found in polymers with functional groups that can both donate/accept hydrogen atoms and have better capability to form cooperative hydrogen bonds. Aligning the chains of poly(acrylic acid) orthogonally to the crack propagation direction significantly enhances the fracture toughness of monolayer GO (by 310%) in comparison to that for an adlayer with randomly arranged chains (180% enhancement). Notably, van der Waals interactions, which are seldom highlighted in the fabrication of strong GOpolymer interfaces, are found to also provide significant crack-bridging capabilities when the polymers possess large side groups. These results pave the way for a set of design criteria that can help in remediating the intrinsically brittle mechanical behavior of two-dimensional materials, a barrier that currently restricts their potential applications. † Electronic supplementary information (ESI) available. See
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.