Effect of LED and halogen light curing on polymerization of resin-based composites (original) (raw)

Light-Emitting Diode (LED) Polymerisation of Dental Composites: Flexural Properties and Polymerisation Potential

Biomaterials, 2000

Comparative Evaluation of Polymerisation Efficiency of A Composite Using Two Different Light Sources

IOSR Journals , 2019

Resin-Based Composite and LCU-related Factors Affecting the Degree of Cure. A Literature Review: Part 2. Light Curing Units & Related Factors

Mohammed S Aldossary

View PDFchevron_right

Effectiveness of second-generation light-emitting diode (LED) light curing units

Carmen Fortes, Susana Samuel

The journal of contemporary dental practice, 2007

View PDFchevron_right

Comparison of Composite Curing Parameters: Effects of Light Source and Curing Mode on Conversion, Temperature Rise and Polymerization Shrinkage

Goran Pichler

Operative Dentistry, 2006

View PDFchevron_right

Pulpal-temperature rise and polymerization efficiency of LED curing lights

Julian Leprince

Operative dentistry

View PDFchevron_right

Light curing of resin-based composites in the LED era

Franklin Garcia-Godoy

American journal of dentistry

View PDFchevron_right

Resin-Based Composite and LCU-related Factors Affecting the Degree of Cure. A Literature Review: Part 1. Resin-Based Composites

Saeed Aldossary

Acta Medica Marisiensis, 2015

View PDFchevron_right

Effects of different polymerization protocols on the degree of conversion of two dual-cured core buildup composites polymerized by light-emitting diode and halogen light-curing units

Arife Dogan

Journal of Applied Polymer Science, 2014

View PDFchevron_right

The Effect of Irradiance on the Degree of Conversion and Volumetric Polymerization Shrinkage of Different Bulk-Fill Resin-Based Composites: An In Vitro Study

Hend Al Nahedh

European Journal of Dentistry

View PDFchevron_right

Polymerization characteristics of colored compomers cured with different LED units

Serife Ozalp

Journal of Applied Biomaterials & Functional Materials, 2019

View PDFchevron_right

Hardness Evaluation of Composite Resins Cured with QTH and LED

behnaz esmaeili

Journal of Dental Research, Dental Clinics, Dental Prospects

View PDFchevron_right

LIGHT-EMITTING DIODE POLYMERIZATION: A REVIEW OF PERFORMANCE, PART I POLIMERIZACIJA SVETLOSNO-EMITUJUĆE DIODE TEHNOLOGIJOM: PREGLED KARAKTERISTIKA - I DEO

Joe Ontiveros

View PDFchevron_right

Effect of exposure time on curing efficiency of polymerizing units equipped with light-emitting diodes

Jose David

Journal of oral science, 2007

View PDFchevron_right

Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs)

Stephen H Ashworth

Dental Materials, 2000

View PDFchevron_right

Knoop hardness depth profiles and compressive strength of selected dental composites polymerized with halogen and LED light curing technologies

Richard Vowles

Journal of Biomedical Materials Research, 2002

View PDFchevron_right

Evaluation of a second-generation LED curing light

Corey Felix

2003

View PDFchevron_right

A Blinded Comparative Study of Four Commercially Available LEDs and a Laser Light Curing Device

John Comisi

European Journal of Dentistry

View PDFchevron_right

Degree of conversion and temperature rise during polymerization of composite resin samples with blue diodes

A Knezević, Goran Pichler, Mira Ristić

Journal of Oral Rehabilitation, 2001

View PDFchevron_right

Efficacy of light-emitting diode light polymerization units used in private practices in Toronto, Ontario, Canada

Omar El-mowafy

The Journal of the American Dental Association, 2019

View PDFchevron_right

Effect of Curing Lights and Bleaching Agents on Physical Properties of a Hybrid Composite Resin

Ana Cláudia Martins

Journal of Esthetic and Restorative Dentistry, 2008

View PDFchevron_right

Curing efficiency of modern LED units

Nicoleta Nicole

Clinical Oral Investigations

View PDFchevron_right

Polymerization kinetics of dental adhesives cured with LED: Correlation between extent of conversion and permeability

Lorenzo Breschi

Dental Materials, 2007

View PDFchevron_right

Influence of different shades and LED irradiance on the degree of conversion of composite resins

Maria Marchi

Brazilian Oral Research, 2012

View PDFchevron_right

Curing effectiveness of resin composites at different exposure times using LED and halogen units

Laura Ceballos

Medicina oral, patología oral y cirugía bucal, 2009

View PDFchevron_right

A survey of output intensity and potential for depth of cure among light-curing units in clinical use

R. Pilo

Journal of Dentistry, 1999

View PDFchevron_right

Effect of the light-emitting diode units on the depth of polymerization of a composite

Maria Marchi

Journal of Research in Dentistry, 2013

View PDFchevron_right

Impact of immediate and delayed light activation on self-polymerization of dual-cured dental resin luting agents

Flávio Demarco, Evandro Piva

Acta Biomaterialia, 2009

View PDFchevron_right

Effects of resin composite composition and irradiation distance on the performance of curing lights

Corey Felix

Biomaterials, 2004

View PDFchevron_right

Influence of the degree of dentine mineralization on pulp chamber temperature increase during resin-based composite (RBC) light-activation

José Guilherme Antunes Guimarães

Journal of Dentistry, 2010

View PDFchevron_right

Effect of LED and halogen light curing on polymerization of resin-based composites (original) (raw)

Related papers