Fuzzy Logic Temperature Control: A feedback control system implemented by fuzzy logic (original) (raw)
2020, World Academy of Research in Science and Engineering
This paper is meant to highlight and discuss the facts and uses of fuzzy logic in terms of a temperature controller. The purpose of this temperature control system is to heat a room to a specified temperature then tries to maintain it at that temperature in a controlled manner. This paper will highlight different possible concerns done in the system and possible solutions to this fuzzy logic pattern. The applications are far-reaching as the temperature control can be depicted and used in multiple control systems such as control temperature in air conditioning units, generators, temperature for aquariums, etc. All these applications with fuzzy logic can help dictate the amount of energy used constantly to save power while achieving the needed amount. The fuzzy logic in temperature control systems can vary and the truth table for the logic system may vary widely as well. However, the main point of the system is to create and apply control correctly. By making use of built-in functions that can potentially correct errors and predict patterns in terms of date and time of the year, the time of the day and the flow of air, etc. It can effectively correct and make adjustments for the temperature correctness.
Related papers
Temperature Control using Fuzzy Logic
The aim of the temperature c ontrol is to heat the system up to delimitated temperature, afterwardhold it at that temperature in insured manner. Fuzzy Logic Controller (FLC) is best way in which this type of precision control can be accomplished b y controller. During past twenty yearssignificant amount of research using fuzzy logic has done in this field of control of non - linear dynamical system. Here we have developed temperature control system using fuzzy logic. Control theory techniques are the root from which convention controllers are deducted . The desired response of the output can be guarante ed by the feedback controller .
Control of the Heating System with Fuzzy Logic
The heating system is widely used because it can sustain wide range of temperature. So temperature control is of prime importance. The heating systems are used for controlled maintenance of indoor ambient characteristics in optimal manner. The objective of these systems is to achieve comfortable and pleasant sensation of people staying in the warm area. The heating control problem is tackled by a fuzzy control scheme. Fuzzy logic systems are employed to maintain the room temperature in required range by determines the maximum and minimum for temperature. One important Artificial Intelligence tool for automatic control is the use of fuzzy logic controllers, which are fuzzy rule-based systems comprising expert knowledge in form of linguistic rules. These rules are usually constructed by an expert in the field of interest who can link the facts with the conclusions. Fuzzy Logic is a paradigm for an alternative design methodology, which can be applied in developing both linear and non-linear systems for embedded control. By using fuzzy logic, designers can realize lower development costs, superior features and better end product performance. In control systems there are a number of generic systems and methods which are encountered in all areas of industry and technology. From the dozens of ways to control any system, it turns out that fuzzy is often the very best way. The only reasons are faster and cheaper. One of successful application that used fuzzy control is heating control system. This paper describes the concept of using simulation as a tool for performance validation and energy analysis of heating systems.
Control of temperature using fuzzy system tehnique
2013
Fuzzy control is based on fuzzy logic. A logical system that is much closer in spirit to human thinking and natural language than traditional crisp logical systems. The fuzzy logic variables are no ...
Temperature Control inside a Room Using Fuzzy Logic Method
2018
In this paper a fuzzy logic controller has been devised to make conditions adapt to a certain temperature range in the room comparing that of the environment. The fuzzy logic controller acts as a room temperature controller through which the air conditioner and the heater present in the room can be controlled. The proposed algorithm uses fuzzy logic as a controlling unit that maintains the temperature of simulated heater or the air condition to the desired point.
This paper outlines the proposal for the design of an intelligent electronic thermostat that achieves control by means of fuzzy logic, with the view of bringing about greater comfort by imitating human reasoning, and more efficient utilization of power. A cheap low cost microcontroller would be used for the implementation of this design. Ambient conditions that influence the perception of temperature serve as inputs to the thermostat and the output is automated and put into effect in temperature adjustment. Program development is to be broken into five parts namely fuzzification, inference, composition and defuzzification and this will be carried out using Inform® software FuzzyTECH®. Automatic decision making of the controller is based on a set of rules generated by the program. After specifying the relationship between the inputs and outputs, a certain number of rules will be generated on which to base decision- making. The number of rules is likely to be high, which will make dec...
An educational fuzzy temperature control system
International Journal of Electrical and Computer Engineering (IJECE), 2020
Control engineering is one of the important engineering topics taught at many engineering based universities around the world in most undergraduate and postgraduate courses. The control engineering curriculum includes both the classical feedback based control theory and the state space theory. The modern control theory is based on the intelligent control algorithms utilizing the soft computing techniques, such as the fuzzy control theory and neural networks. Laboratory work is an important part of any control engineering course. The problem with the modern control theory laboratories is that it is essential to offer simple experiments to students so that they can easily put the complex theories they have learned in their courses into practice and see and understand the results. This paper describes the design of a low-cost fuzzy based microcontroller temperature control system using off the shelf products. The developed system should provide a low-cost fuzzy control experiment in the laboratories for students studying control engineering.
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.