Characterisation of copolymer, poly (hydroxybutyrate-co-hydroxyvalerate) (PHBco-PHV) produced by Halomonas campisalis (MCM B1027), its biodegradability and potential application (original) (raw)
Related papers
International journal of biological macromolecules, 2015
For cost effective production of PHA, agro-wastes like fruit peels, bagasse and deoiled cakes were screened as a sole source of carbon. Halomonas campisalis MCM B-1027, which was isolated from one of the extreme environment, i.e. Lonar Lake, India, was explored for the production of PHA using fruit peels and bagasse having fermentable sugars. Among the agro-wastes tested, 1% (v/v) aqueous extract of bagasse was found to be the optimum carbon source with 47% PHA production on dry cell weight basis. Significant amount of total sugars are utilized and converted into cell mass and PHA, e.g. 62% sugar utilized from bagasse extract, 84% from orange peel extract and 71% from banana peel extract as compared to 51% in case of maltose. Hence the cost of production would be positively reduced. The detailed characterization of PHA formed by H. campisalis using bagasse extract as sole carbon source revealed that the organism produces a copolymer of PHB-co-PHV (94.4:5.6) having molecular weight M...
World Journal of Microbiology & Biotechnology, 2011
Polyhydroxyalkanoates are water-insoluble, hydrophobic polymers and can be degraded by microorganisms that produce extracellular PHA depolymerase. The present work was aimed to evaluate the degradability of Polyhydroxyalkanoate film produced by Halomonas hydrothermalis using Jatropha biodiesel byproduct as a substrate. PHB films were subjected to degradation in soil and compared with the synthetic polymer (acrylate) and blend prepared using the synthetic polymer (acrylate) and PHB. After 50 days, 60% of weight loss in PHB film and after 180 days 10% of blended film was degraded while no degradation was found in the synthetic film. Scanning electron microscopy and confocal microscopy revealed that after 50 days the PHB film and the blended film became more porous after degradation while synthetic film was not porous. The degradative process was biologically mediated which was evident by the control in which the PHB films were kept in sterile soil and the films showed inherent integrity over time. The TGA and DSC analysis shows that the melting temperatures were changed after degradation indicating physical changes in the polymer during degradation.
Frontiers in Bioengineering and Biotechnology
Microbial polyhydroxyalkanoates (PHA) are biodegradable and biocompatible bio-based polyesters, which are used in various applications including packaging, medical and coating materials. In this study, an extremophilic hydrocarbonoclastic bacterium, previously isolated from saline sediment in the Tunisian desert, has been investigated for PHA production. The accumulation of intracellular PHA granules in Halomonas desertis G11 was detected by Nile blue A staining of the colonies. To achieve maximum PHA yield by the strain G11, the culture conditions were optimized through response surface methodology (RSM) employing a Box-Behnken Design (BBD) with three independent variables, namely, substrate concentration (1–5%), inoculum size (1–5%) and incubation time (5–15 days). Under optimized conditions, G11 strain produced 1.5 g/L (68% of DCW) of PHA using glycerol as a substrate. Application of NMR (1H and 13C) and FTIR spectroscopies showed that H. desertis accumulated PHA is a poly-3-hydr...
Journal of Polymers and the Environment, 2019
In this work, the characterization of poly(3-hydroxybutyrate) PHB produced by Halomonas salina isolated from a hypersa-line microbial mat from Guerrero Negro, Baja California Sur, Mexico, is reported. The bacterial strain was able to produce isotactic PHB biopolymer with glucose (1%) as a single carbon source. The chemical structure of the polymer obtained was confirmed by Fourier-transform infrared (FTIR) and Nuclear magnetic resonance (NMR) spectroscopy. The polymer was thermally stable up to 225 °C and Differential scanning calorimetry (DSC) analysis showed a melting temperature (T m) of 173.6 °C. The obtained polymer presented a lower degree of crystallinity (39.3%) in comparison with PHB produced by other bacteria and polyhydroxyalkanoate co-polymers. Thus, the PHB biopolymer obtained in this study, could be recognized as more suitable for practical use, contributing to the repertoire of available bioplastics for further potential biotechnological applications, in which elastic polymers are needed.
BIO-BASED AND BIODEGRADABLE MATERIALS FOR PACKAGING
Microorganims are versatile in coping up with their environment. Under balanced nutritional conditions they produce biodegradable polymer, Polyhydroxyalkanoate (PHA) which is accumulated intracellularly. This storage material is degraded to derive carbon and energy by the microorganisms that produce it. Microbial polymers, PHAs are polyesters of hydroxyacids. They are synthesized by three enzymes viz. 3-ketothiolase, Acetoacetyl-Co-A reductase and PHA synthase. Over 300 microbial species have been reported to produce PHA. Alcaligenes eutrophus (Ralstonia eutrophus or Cupriavidus necator) is the most studied organism and polyhydroxybutyrate (PHB) is the most extensively studied polymer. Extremophiles, the microorganisms growing at extreme conditions of pH, temperature, salinity, and so on are now recognized as the source of PHA. Moderately halophilic Halomonas sp. and halophilic archaea Haloferax sp. are reported to produce PHA. Copolymers of different hydroxyacids enhance the elasti...
We synthesized poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3-HB-co-3-HV)] copolymer having different contents of 3- hydroxyvalerate (3-HV) units (16.04, 16.3, 24.95, 25.62, and 16.52 mol % 3-HV) with different yields of polyhydroxyalkanoates (PHAs) by feeding with different cooking oils and with Alkaliphilus oremlandii OhILAs strain. The PHA production efficiency of the Alkaiphilus strain was compared with that of the control strain, Bacillus cereus. The synthesis of each PHA biopolymer was performed with different toxic spent oils as the sole carbon source in an oil-in-water-based microemulsion medium. We observed that the productivity of the poly(3- hydroxybutyrate) [P(3-HB)] copolymer from the Alkaliphilus strain was higher than those of the PHAs isolated from B. cereus and the Escherichia coli XL1B strain. The synthesized PHA copolymers were characterized by 1H-NMR and Fourier transform infrared (FTIR) spectroscopy. In the 1H-NMR spectra, a doublet resonance peak at 1.253 ppm of the/ methyl protons of the 3-hydroxybutyrate (3-HB) side group and one at 0.894 ppm due to the methyl protons of the 3-HV side group indicated the presence of 3-HB and 3-HV units in the copolymer. The chemical shift values at 1.25 and 2.2 ppm, due to the resonance absorption peaks of the methyl protons and methylene protons, confirmed the synthesis of the P(3-HB) homopolymer. From the FTIR spectra, a strong C@O stretching frequency in the range of 1745–1727 cm21, together with strong CAO stretching bands near 1200 cm21 and a strong band near 3400 cm21, confirmed the synthesis of P(3-HB-co-3-HV) and P(3-HB). Thus, waste cooking oil as a substrate provided an alternate route for the formation of P(3-HB-co-3- HV) and P(3-HB) by Alkaliphilus and E. coli strains, respectively
International Journal of Molecular Sciences
Due to increased environmental pressures, significant research has focused on finding suitable biodegradable plastics to replace ubiquitous petrochemical-derived polymers. Polyhydroxyalkanoates (PHAs) are a class of polymers that can be synthesized by microorganisms and are biodegradable, making them suitable candidates. The present study looks at the degradation properties of two PHA polymers: polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-polyhydroxyvalerate (PHBV; 8 wt.% valerate), in two different soil conditions: soil fully saturated with water (100% relative humidity, RH) and soil with 40% RH. The degradation was evaluated by observing the changes in appearance, chemical signatures, mechanical properties, and molecular weight of samples. Both PHB and PHBV were degraded completely after two weeks in 100% RH soil conditions and showed significant reductions in mechanical properties after just three days. The samples in 40% RH soil, however, showed minimal changes in mechan...
Polyhydroxyalkanoates (PHAs) are bacterial polymers that are formed as naturally occurring storage polyesters by a wide range of microorganisms. Biodegradable and biocompatible poly(3-hydroxybutyrate) (PHB) and its copolymers with 3-hydroxyvalerate (PHBV) are the best known representatives of PHA family. For more than 20 years biosynthesis, biodegradation and applications of PHB and its copolymers have been studied in the Bach Institute of Biochemistry RAS. An effective technology for production of PHB and PHBV of different molecular weight (from 200 to 1500 kDa) by diazotrophic bacteria of Azotobacter and Rhizobium genus has been developed. In order to clarify mechanism of PHB biodegradation degradation of PHB at different conditions in vitro and in vivo have been studied. A number of medical devices on basis of PHB: surgical meshes, screws and plates for bone fixation, periodontal membranes, and wound dressing are developed. High biocompatibility of PHB films and medical devices implanted in animal tissues has been demonstrated. Nowadays, development of systems of sustained drug delivery on the base of PHAs microspheres and microcapsules as a new and promising trend in the modern pharmacology is intensively in progress.
Pure and Applied Chemistry, 2017
Today, there is an increasing concern about protection of ecological systems. Petro-based synthetic polymers are not biodegradable and cause environmental pollution. These polymers that are stuck in nature, affect wildlife adversely. Also, in future petrochemical materials will drain away and demand for ecofriendly plastics which can substitute synthetic plastics will increase. Biopolymers are products which can be degraded by enzymatic activities of various microorganisms, and the degradation products are nontoxic. They are attractive alternatives to non-degradable materials in short-term applications such as packaging. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a member of polyhydroxyalkanoate (PHA) family which is biodegradable and produced by microorganism. It has good gas barrier properties that make it convenient to use in different applications. The present paper gives an overview on PHAs and their composites, their main properties, with a specific focus on potential applications of PHBV in packaging.