Computational Methods for Inclined Cracks in Orthotropic Functionally Graded Materials Under Thermal StressesPLEASE SCROLL DOWN FOR ARTICLECOMPUTATIONAL METHODS FOR INCLINED CRACKS IN ORTHOTROPIC FUNCTIONALLY GRADED MATERIALS UNDER THERMAL STRESSES (original) (raw)

Abstract

sparkles

AI

The paper discusses computational methods to analyze inclined cracks in orthotropic functionally graded materials (FGMs) subjected to thermal stresses. The introduction highlights the relevance of FGMs in various technological applications due to their material gradation, which addresses design challenges inherent in homogeneous materials. The computational framework proposed aims to improve the understanding of crack behavior in these advanced materials, accounting for their unique thermal and mechanical properties.

Loading...

Loading Preview

Sorry, preview is currently unavailable. You can download the paper by clicking the button above.

References (34)

  1. X. Chen, L. Gu, B. Zou, Y. Wang, and X. Cao, New Functionally Graded Thermal Barrier Coating System Based on LaMgAl11O19/YSZ Prepared by Air Plasma Spraying, Surface & Coatings Technology, vol. 206, pp. 2265-2274, 2012.
  2. Y. Liu, C. Compson, and M. Liu, Nanostructured and Functionally Graded Cathodes for Intermediate Solid Oxide Fuel Cells, Journal of Power Sources, vol. 138, pp. 194-198, 2004.
  3. X. Bai, S. Sandukas, M. Appleford, J. L. Ong, and A. Rabiei, Antibacterial Effect and Cytotoxicity of Ag-Doped Functionally Graded Hydroxyapatite Coatings, Journal of Biomedical Materials Research Part B, vol. 100B, pp. 553-561, 2012.
  4. E. Bafekrpour, G. P. Simon, J. Habsuda, M. Naebe, C. Yang, and B. Fox, Fabrication and Characterization of Functionally Graded Synthetic Graphite/Phenolic Nanocomposites, Materials Science and Engineering A, vol. A545, pp. 123-131, 2012.
  5. A. Witvrouw and A. Mehta, The Use of Functionally Graded Poly-SiGe Layers for MEMs Applications, Materials Science Forum, vol. 492-493, pp. 255-260, 2005.
  6. W. A. Kaysser and B. Ilschner, FGM Research Activities in Europe, MRS Bulletin, vol. 20, pp. 22-26, 1995.
  7. S. Sampath, H. Herman, N. Shimoda, and T. Saido, Thermal Spray Processing of FGMs, MRS Bulletin, vol. 20, pp. 27-31, 1995.
  8. Y. Ootao and Y. Tanigawa, Three-Dimensional Solution for Transient Thermal Stresses of an Orthotropic Functionally Graded Rectangular Plate, Composite Structures, vol. 80, pp. 10-20, 2007.
  9. W. Liu and Z. Zhong, Three-Dimensional Thermoelastic Analysis of Functionally Graded Plate, Acta Mechanica Solida Sinica, vol. 24, pp. 241-249, 2011.
  10. Y. Jiangong, Z. Xiaoming, and X. Tonglong, Generalized Thermoelastic Waves in Functionally Graded Plates Without Energy Dissipation, Composite Structures, vol. 93, pp. 32-39, 2010.
  11. P. Desai and T. Kant, A Mixed Semi Analytical Solution for Functionally Graded (FG) Finite Length Cylinders of Orthotropic Materials Subjected to Thermal Load, International Journal of Mechanics and Materials in Design, vol. 8, pp. 89-100, 2012.
  12. A. Kar and M. Kanoria, Generalized Thermoelastic Functionally Graded Orthotropic Hollow Sphere Under Thermal Shock with Three-Phase-Lag Effect, European Journal of Mechanics A/Solids, vol. 28, pp. 32-39, 2009.
  13. J. Chen, Determination of Thermal Stress Intensity Factors for an Interface Crack in a Graded Orthotropic Coating -Substrate Structure, International Journal of Fracture, vol. 133, pp. 303-328, 2005.
  14. Y. T. Zhou, X. Li, and D. Yu, A Partially Insulated Interface Crack Between a Graded Orthotropic Coating and a Homogeneous Orthotropic Substrate Under Heat Flux Supply, International Journal of Solids and Structures, vol. 47, pp. 768-778, 2010.
  15. Y. T. Zhou, X. Li, and J. Q. Qin, Transient Thermal Stress Analysis of Orthotropic Functionally Graded Materials with a Crack, Journal of Thermal Stresses, vol. 30, pp. 1211-1231, 2007.
  16. L. C. Guo, L. Z. Wu, T. Zeng, and L. Ma, Mode I Crack Problem for a Functionally Graded Orthotropic Strip, European Journal of Mechanics -A Solids, vol. 23, pp. 219-234, 2004.
  17. S. Dag and K. A. Ilhan, Mixed-Mode Fracture Analysis of Orthotropic Functionally Graded Materials Using Analytical and Computational Methods, Journal of Applied Mechanics -Transactions of the ASME, vol. 75, 051104, 2008.
  18. S. Dag, B. Yildirim, and D. Sarikaya, Mixed-Mode Fracture Analysis of Orthotropic Functionally Graded Materials Under Mechanical and Thermal Loads, International Journal of Solids and Structures, vol. 44, pp. 7816-7840, 2007.
  19. S. Dag, B. Yildirim, and F. Erdogan, Interface Crack Problems in Graded Orthotropic Media: Analytical and Computational Approaches, International Journal of Fracture, vol. 130, pp. 471-496, 2004.
  20. M. Ozturk and F. Erdogan, The Mixed Mode Crack Problem in an Inhomogeneous Orthotropic Medium, International Journal of Fracture, vol. 98, pp. 243-261, 1999.
  21. S. Dag, E. E. Arman, and B. Yildirim, Computation of Thermal Fracture Parameters for Orthotropic Functionally Graded Materials Using J k -Integral, International Journal of Solids and Structures, vol. 47, pp. 3480-3488, 2010.
  22. J. H. Kim and A. Kc, A Generalized Interaction Integral Method for the Evaluation of T-stress in Orthotropic Functionally Graded Materials Under Thermal Loading, Journal of Applied Mechanics -Transactions of the ASME, vol. 75, 051112, 2008.
  23. S. Dag, Thermal Fracture Analysis of Orthotropic Functionally Graded Materials Using an Equivalent Domain Integral Approach, Engineering Fracture Mechanics, vol. 73, pp. 2802-2828, 2006.
  24. S. Dag and B. Yildirim, Computation of Thermal Fracture Parameters for Inclined Cracks in Functionally Graded Materials Using J k -Integral, Journal of Thermal Stresses, vol. 32, pp. 530-556, 2009.
  25. B. Yildirim, S. Yilmaz, and S. Kadioglu, Delamination of Compressively Stressed Orthotropic Functionally Graded Material Coatings under Thermal Loading, Journal of Applied Mechanics -Transactions of the ASME, vol. 75, 051106, 2008.
  26. B. N. Rao and S. Rahman, A Continuum Shape Sensitivity Method for Fracture Analysis of Orthotropic Functionally Graded Materials, Mechanics of Materials, vol. 37, pp. 1007-1025, 2005.
  27. J. H. Kim and G. H. Paulino, T -Stress in Orthotropic Functionally Graded Materials: Lekhnitskii and Stroh Formalisms, International Journal of Fracture, vol. 126, pp. 345-384, 2004.
  28. J. H. Kim and G. H. Paulino, Mixed-Mode J -Integral Formulation and Implementation Using Graded Finite Elements for Fracture Analysis of Nonhomogeneous Orthotropic Materials, Mechanics of Materials, vol. 35, pp. 107-128, 2003.
  29. ANSYS Inc., ANSYS Basic Analysis Procedures Guide, Release 5.4, Canonsburg, PA, USA, 1997.
  30. P. Sollero and M. H. Aliabadi, Fracture Mechanics Analysis of Anisotropic Plates by the Boundary Element Method, International Journal of Fracture, vol. 64, pp. 269-284, 1993. Downloaded by [Orta Dogu Teknik Universitesi] at 06:48 26 August 2013
  31. B. Yildirim, S. Dag, and F. Erdogan, Three Dimensional Fracture Analysis of FGM Coatings Under Thermomechanical Loading, International Journal of Fracture, vol. 132, pp. 369-395, 2005.
  32. F. Erdogan and B. H. Wu, Crack Problems in FGM Layers Under Thermal Stresses, Journal of Thermal Stresses, vol. 19, pp. 237-265, 1996.
  33. A. Kc and J.-H. Kim, Interaction Integrals for Thermal Fracture of Functionally Graded Materials, Engineering Fracture Mechanics, vol. 75, pp. 2542-2565, 2008.
  34. M. B. Nazari, M. Shariati, M. R. Eslami, and B. Hassani, Computation of Stress Intensity Factor in Functionally Graded Plates under Thermal Shock, Journal of Mechanical Engineering, vol. 57, pp. 622-632, 2011.