A way to identify archaellins in Halobacterium (original) (raw)
Related papers
A way to identify archaellins in Halobacterium salinarum archaella by FLAG-tagging
Central European Journal of Biology, 2013
In the current study, haloarchaea Halobacterium salinarum cells were transformed individually with each of the modified archaellin genes (flaA1, flaA2 and flaB2) containing an oligonucleotide insert encoding the FLAG peptide (DYKDDDDK). The insertion site was selected to expose the FLAG peptide on the archaella filament surface. Three types of transformed cells synthesizing archaella, containing A1, A2, or B2 archaellin modified with FLAG peptide were obtained. Electron microscopy of archaella has demonstrated that in each case the FLAG peptide is available for the specific antibody binding. It was shown for the first time that the B2 archaellin, like archaellins A1 and A2, is found along the whole filament length. © Versita Sp. z o.o.
Frontiers in Microbiology, 2019
Halobacterium salinarum are halophilic archaea that display directional swimming in response to various environmental signals, including light, chemicals and oxygen. In Hbt. salinarum, the building blocks (archaellins) of the archaeal swimming apparatus (the archaellum) are N-glycosylated. However, the physiological importance of archaellin N-glycosylation remains unclear. Here, a tetrasaccharide comprising a hexose and three hexuronic acids decorating the five archaellins was characterized by mass spectrometry. Such analysis failed to detect sulfation of the hexuronic acids, in contrast to earlier reports. To better understand the physiological significance of Hbt. salinarum archaellin N-glycosylation, a strain deleted of aglB, encoding the archaeal oligosaccharyltransferase, was generated. In this aglB strain, archaella were not detected and only low levels of archaellins were released into the medium, in contrast to what occurs with the parent strain. Mass spectrometry analysis of the archaellins in aglB cultures did not detect N-glycosylation. aglB cells also showed a slight growth defect and were impaired for motility. Quantitative real-time PCR analysis revealed dramatically reduced transcript levels of archaellin-encoding genes in the mutant strain, suggesting that N-glycosylation is important for archaellin transcription, with downstream effects on archaellum assembly and function. Control of AglB-dependent post-translational modification of archaellins could thus reflect a previously unrecognized route for regulating Hbt. salinarum motility.
On the multicomponent nature of Halobacterium salinarum flagella
Microbiology, 2007
Filaments of the flagellum of the halophilic archaeon Halobacterium salinarum consist of five flagellins: A1, A2, B1, B2, and B3, which are encoded by five genes localized in tandem in two flgA and flgB operons. While the role of flagellins A1 and A2 has been determined, the role of the proteins, B operon products, is still unclear. A mutant strain of H. salinarum with deleted A and B flagellin genes (ΔflgAΔflgB) has been obtained for the first time. This strain has been used to create and analyze the strains carrying only individual B1 or B3 flagellin genes. Cells of the ΔflgAΔflgB strain were shown to have short filamentous formations, 7–8 nm thick, which we have named as X-filaments. It has been shown that X-filaments consist of a protein immunologically related to flagellins A and B. Expression of the B1 and B3 genes is suppressed in the absence of A1, A2, and B2. It has been shown that flagellins B1 and B3 cannot be substituted for flagellin B2 upon the formation of a curved hook-like structure, which serves as a connecting element between the flagellar filament and the motor axis. The multicomponent nature of flagella is discussed in the light of their possible involvement in other cell processes besides providing motility.
Role of flagellins from A and B loci in flagella formation of Halobacterium salinarum
Molecular Microbiology, 2000
Haloarchaeal¯agella are composed of a number of distinct¯agellin proteins, speci®ed by genes in two separate operons (A and B). The roles of these¯agellins were assessed by studying mutants of H. salinarum with insertions in either the A or the B operon. Cells of the¯gA À mutant produced abnormally short, curved agella that were distributed all over the cell surface. The¯gA2 À strain produced straight¯agella, mainly found at the poles. The¯gB À mutant had¯agella of the same size and spiral shape as wild-type cells, but these cells also showed unusual outgrowths, which appeared to be sacs ®lled with basal body-like structures. In broth cultures of this mutant, the medium accumulated¯agella with basal body-like structures at their ends. Tel./Fax (7) 095 924 04 93.
Cellular morphogenesis in a halophilic archaebacterium
Current Microbiology, 1985
Cultures of a red halophilic archaebacterium exhibiting a complex morphology and cellular morphogenesis were obtained on a medium containing Halobacterium cutirubrum cell lysate. On primary culture the organism grew as an amorphous cellular mass 20 or more micrometers in diameter and underwent multiple internal cellular subdivision to produce a multicellular structure consisting of cuboidal cells of submicron dimensions. These disaggregated, elongated, cells became motile and multiplied by budding, thereby resembling the eubacterium Geodermatophilus. The new isolates are identified as archaebacteria on the basis of their response to antibiotics, probable absence of peptidoglycan, and the presence of ether-linked lipids.
FEMS Microbiology Letters, 2003
We determined the complete nucleotide sequence of the 16 341 bp plasmid pHH205 of the extremely halophilic archaeon Halobacterium salinarum J7. The plasmid has a G+C content of 61.1%. A number of direct and inverted repeat sequences were found in pHH205, while no insertion sequences were found. Thirty-eight large open reading frames (ORFs) were identified in both strands, and most of them had no significant similarities to known proteins. A putative protein encoded by ORF31 showed 20^41% homology to some hypothetical proteins, which are annotated in several archaeal genome databases as predicted nucleic acid-binding proteins containing PIN domain. Sequence analysis using the GC skew procedure predicted a possible origin of replication. A 4.8 kb PvuII^SnaBI fragment containing both this region and ORF31 was shown to be able to restore replicate of pWL102, a replicon-deficient plasmid in Haloferax volcanii and in H. salinarum R1. Several methods failed to completely cure H. salinarum J7 of pHH205, suggesting that the plasmid probably played an important role in the growth and metabolism of the host. Our work describes a novel haloarchaeal replicon, which may be useful in the construction of cloning and shuttle vectors.
Alternative flagellar filament types in the haloarchaeon Haloarcula marismortui
Canadian Journal of Microbiology, 2008
Many Archaea use rotation of helical flagellar filaments for swimming motility. We isolated and characterized the flagellar filaments of Haloarcula marismortui, an archaeal species previously considered to be nonmotile. Two Haloarcula marismortui phenotypes were discriminated-their filaments are composed predominantly of either FlaB or FlaA2 flagellin, and the corresponding genes are located on different replicons. FlaB and FlaA2 filaments differ in antigenicity and thermostability. FlaA2 filaments are distinctly thicker (20-22 nm) than FlaB filaments (16-18 nm). The observed filaments are nearly twice as thick as those of other characterized euryarchaeal filaments. The results suggest that the helicity of Haloarcula marismortui filaments is provided by a mechanism different from that in the related haloarchaeon Halobacterium salinarum, where 2 different flagellin molecules present in comparable quantities are required to form a helical filament.
PLOS ONE, 2015
Our ability to genetically manipulate living organisms is usually constrained by the efficiency of the genetic tools available for the system of interest. In this report, we present the design, construction and characterization of a set of four new modular vectors, the pHsal series, for engineering Halobacterium salinarum, a model halophilic archaeon widely used in systems biology studies. The pHsal shuttle vectors are organized in four modules: (i) the E. coli's specific part, containing a ColE1 origin of replication and an ampicillin resistance marker, (ii) the resistance marker and (iii) the replication origin, which are specific to H. salinarum and (iv) the cargo, which will carry a sequence of interest cloned in a multiple cloning site, flanked by universal M13 primers. Each module was constructed using only minimal functional elements that were sequence edited to eliminate redundant restriction sites useful for cloning. This optimization process allowed the construction of vectors with reduced sizes compared to currently available platforms and expanded multiple cloning sites. Additionally, the strong constitutive promoter of the fer2 gene was sequence optimized and incorporated into the platform to allow high-level expression of heterologous genes in H. salinarum. The system also includes a new minimal suicide vector for the generation of knockouts and/or the incorporation of chromosomal tags, as well as a vector for promoter probing using a GFP gene as reporter. This new set of optimized vectors should strongly facilitate the engineering of H. salinarum and similar strategies could be implemented for other archaea.