EXPERIMENTAL AND THEORETICAL INSIGHT INTO FORMULATIONS BASED ON POLY(VINYL ALCOHOL BORIC ACID) AND DICLOFENAC SODIUM SALT (original) (raw)
Related papers
Drug Release Kinetics from Polymer Matrix through Fractal Approximation of Motion
Smart Materials Research, 2012
The present paper analyzes the process of drug release from polymer matrix. This process has been considered as fractal polymer process. Since complexity of physical processes is replaced by fractality, the paper studies the process through fractal approach. In drug dynamics, fractal “diffusion” equation can be obtained through fractal approximation of motion. All experimental release curves have been best demonstrated by Weibull relation (which was, in its turn, also demonstrated). Weibull parameters are related to the fractal dimension of drug release kinetics from a polymer matrix. Such a dimension can characterize and measure the complexity of the system. In the above-mentioned context, some experimental results of our researchers are presented and analyzed by comparing them with Peppas relation, a basic law in the description of drug release kinetics. Consequently, experimental data for Weibull relation are better correlated with certain resulting factors. At the same time, som...
Towards Drug Release Dynamics from a Multifractal Perspective of Motion
BULETINUL INSTITUTULUI POLITEHNIC DIN IAȘI. Secția Matematica. Mecanică Teoretică. Fizică
A new mathematical method in the drug release dynamics is proposed using Scale Relativity Theory. Our method is completely different than the standard one, because the variables through which we can describe the release dynamics are non-differentiable mathematical functions (i.e. mathematicals functions both dependent of spatial and time coordinates, and also of scale resolutions). In such context, the scale resolution is correlated with drug release degree so that various drug release regimes can be highlighted (gradual drug release, saturation, decay of polymer matrix etc.).
2021
Controlled drug release is a promising pathway of biomedicine, meant to suppress side effects with the aim of increasing patient`s comfort. A route to achieve this goal represents the encapsulation of drugs into matrixes, capable to develop physical forces, which further can control the drugs release. To this purpose, mathematical modeling is an important tool, which offers the possibility to understand the drug release mechanisms and to further design new performant systems. In this paper, a theoretical model for drug release from an amphiphilic matrix is presented. This is achieved using a conservation multifractal law of probability density followed by validation of the model. Moreover, because nonsteroidal anti-inflammatory drugs (NSAIDs), such as diclofenac, are widely used in endometriosis as painkillers for dysmenorrhea management or Asherman syndrome for reducing the endometrial inflammation, some implications of our model for drug delivery systems applied in the field of gy...
Nonlinearities in Drug Release Process from Polymeric Microparticles: Long-Time-Scale Behaviour
Journal of Applied Mathematics, 2012
A theoretical model of the drug release process from polymeric microparticles (a particular type of polymer matrix), through dispersive fractal approximation of motion, is built. As a result, the drug release process takes place through cnoidal oscillations modes of a normalized concentration field. This indicates that, in the case of long-time-scale evolutions, the drug particles assemble in a lattice of nonlinear oscillators occur macroscopically, through variations of drug concentration. The model is validated by experimental results.
A Multifractal Vision of 5-Fluorouracil Release from Chitosan-Based Matrix
Gels
A suite of four drug deliverance formulations grounded on 5-fluorouracil enclosed in a chitosan-founded intercellular substance was produced by 3,7-dimethyl-2,6-octadienal with in situ hydrogelation. The formulations have been examined from a morphological and structural point of view by Fourier transform infrared (FTIR) spectroscopy and microscopy with polarized light, respectively. The polarized optical microscopy (POM) pictures of the three representative formulations obtained were investigated by fractal analysis. The fractal dimension and lacunarity of each of them were thus calculated. In this paper, a novel theoretical method for mathematically describing medicament deliverance dynamics in the context of the polymeric medicament constitution limit has been advanced. Assuming that the polymeric drug motion unfolds only on the so-called non-differentiable curves (considered mathematically multifractal curves), it looks like in a one-dimensional hydrodynamic movement within a mu...
Monte carlo simulation of diffusion-limited drug release from finite fractal matrices
Journal of Sol-Gel Science and Technology, 2006
How fast can drug molecules escape from a controlled matrix-type release system? This important question is of both scientific and practical importance, as increasing emphasis is placed on design considerations that can be addressed only if the physical chemistry of drug release is better understood. In this work, this problem is studied via Monte Carlo computer simulations. The drug release is simulated as a diffusion-controlled process. Six types of Menger sponges (all having the same fractal dimension, d f = 2.727, but with different values of random walk dimension, d w ∈ [2.028, 2.998]) are employed as models of drug delivery devices with the aim of studying the consequences of matrix structural properties (characterized by d f and d w) on drug release performance. The results obtained show that, in all cases, drug release from Menger sponges follows an anomalous behavior. Finally, the influence of the matrix structural properties on the drug release profile is quantified.
Parametric simulation of drug release from hydrogel-based matrices
Journal of Pharmacy and Pharmacology, 2012
In this work a model recently proposed to describe the drug release from hydrogel-based matrices was applied to describe the fractional drug release from matrices based on hydroxypropylmethylcellulose (HPMC) and diclofenac. Methods The model, firstly proposed to describe the behaviour of systems based on HPMC and theophylline and a single set of preparation variables, is based on mass balances and transport phenomena evaluation and it was solved by an FEM-based numerical code. The experimental data on the HPMC-diclofenac matrices, taken from literature, have been obtained by varying the drug loading ratio, the compression force, the powder size of both the drug and the polymer. Key findings A good agreement between experimental data and model predictions, as calculated in the present work, was obtained without the use of any adjustable parameters. Conclusions The predictive nature of the model has been confirmed, even changing the drug molecule and other preparative parameters.
Fractal kinetics in drug release from finite fractal matrices
The Journal of Chemical Physics, 2003
We have re-examined the random release of particles from fractal polymer matrices using Monte Carlo simulations, a problem originally studied by Bunde et al. ͓J. Chem. Phys. 83, 5909 ͑1985͔͒. A certain population of particles diffuses on a fractal structure, and as particles reach the boundaries of the structure they are removed from the system. We find that the number of particles that escape from the matrix as a function of time can be approximated by a Weibull ͑stretched exponential͒ function, similar to the case of release from Euclidean matrices. The earlier result that fractal release rates are described by power laws is correct only at the initial stage of the release, but it has to be modified if one is to describe in one picture the entire process for a finite system. These results pertain to the release of drugs, chemicals, agrochemicals, etc., from delivery systems.
Journal of Controlled Release, 1996
The movement of the penetrant and polymer fronts and the drug dissolution in highly loaded swellable matrix tablets were studied with the aim of establishing relationships between front position and drug release kinetics. Three boundaries were identified corresponding to the swelling, diffusion and erosion fronts. The kinetics of drug release depended on the relative movement of the erosion and swelling/diffusion fronts. Under certain conditions of drug solubility and loading in the matrix, the last two could move separately. The data obtained demonstrated that the difference between the diffusion and erosion fronts is decisive for the release kinetics. This leads to a new finding that the distance between diffusion and erosion fronts (dissolved drug gel layer thickness) is the most important parameter for drug release, instead of the distance between swelling and erosion fronts (whole gel layer thickness).
A model for the drug release from a polymer matrix tablet—effects of swelling and dissolution
Journal of Controlled Release, 2006
A model for simulating the drug release from a swelling and dissolving polymer tablet is presented and verified to data. The model is based on a mechanistic approach, and it can therefore be employed to study the sensitivity of true physical constants, for instance the drug diffusion coefficient or the drug solubility. The model generates the drug and polymer release profiles and the front positions of the total tablet, the solid core, and of the solid-drug-solubilized-drug interface. The convective contribution to mass transfer is shown to be of great importance. This is most markedly noticed for slowly diffusing drugs. In a simulation with a low value of the drug diffusion coefficient, it is shown that the initial drug release rate is faster than the polymer dissolution rate, followed by a second stage with a slower drug release rate. Furthermore, it is shown that polymer dissolution influences the drug release profile significantly, but not the front position of saturated drug in the gel layer. The model is verified against drug release and polymer dissolution data for the slightly soluble drug Methyl paraben and the soluble drug Saligenin in a poly (ethylene oxide) tablet, resulting in good agreement between model and experiments.