Antibacterial activity and mechanism of action of phosphonopeptides based on aminomethylphosphonic acid (original) (raw)
Related papers
Concerns in the Design and Development of Novel Antimicrobial Peptides
2017
Peptide and protein based therapeutics are the most promising approaches in today medicine. Bioactive peptides can be valuable drugs in the treatment of various illnesses, such as cardiovascular and neurodegenerative diseases. Cell toxic peptides can be considered for cancer or infection therapy. Antimicrobial peptides (AMPs) are one of the most interesting antibiotic groups in this regard, especially in drug resistance infections. Numerous AMPs have been discovered from the natural source; however, artificial synthetic ones have been also developed based on rational design or bioinformatics modeling. Physicochemical features of AMPs are highly important in their antibacterial activity as well as their toxicity. The best AMP is the one that has selective potent antimicrobial bioactivity and no or least hemolytic and cytotoxic effect. In this review, various structural factors affecting the AMPs bioactivity, such as AMPs size, charge, amphipathicity, and amino acid sequence are illus...
Design of Synthetic Antimicrobial Peptides Based on Sequence Analogy and Amphipathicity
European Journal of Biochemistry, 1997
Novel A-helical antimicrobial peptides have been devised by comparing the N-terminal sequences of many of these peptides from insect, frog and mammalian families, extracting common features, and creating sequence templates with which to design active peptides. Determination of the most frequent amino acids in the first 20 positions for over 80 different natural sequences allowed the design of one peptide, while a further three were based on the comparison of the sequences of A-helical antimicrobial peptides derived from the mammalian cathelicidin family of precursors. These peptides were predicted to assume a highly amphipathic A-helical conformation, as indicated by high mean hydrophobic moments. In fact, circular dichroism experiments showed clear transitions from random coil in aqueous solution to an A-helical conformation on addition of trifluoroethanol. All four peptides displayed a potent antibacterial activity against selected gram-positive and gram-negative bacteria (minimum inhibitory concentrations in the range 1Ϫ8 µM), including some antibiotic resistant strains. Permeabilization of both the outer and cytoplasmic membranes of the gram-negative bacterium, Escherichia coli, by selected peptides was quite rapid and a dramatic drop in colony forming units was observed within 5 min in time-killing experiments. Permeabilization of the cytoplasmic membrane of the gram-positive bacterium, Staphylococcus aureus, was instead initially quite slow, gathering speed after 45 min, which corresponds to the time required for significant inactivation in time-killing studies. The cytotoxic activity of the peptides, determined on several normal and transformed cell lines, was generally low at values within the minimum inhibitory concentration range.
Molecules (Basel, Switzerland), 2018
Antimicrobial peptides (AMPs) contain amphipathic structures and are derived from natural resources. AMPs have been found to be effective in treating the infections caused by antibiotic-resistant bacteria (ARB), and thus, are potential lead compounds against ARB. AMPs' physicochemical properties, such as cationic nature, amphiphilicity, and their size, will provide the opportunity to interact with membrane bilayers leading to damage and death of microorganisms. Herein, AMP analogs of [R₄W₄] were designed and synthesized by changing the hydrophobicity and cationic nature of the lead compound with other amino acids to provide insights into a structure-activity relationship against selected model Gram-negative and Gram-positive pathogens. Clinical resistant strains of methicillin-resistant (MRSA) and () were used in the studies. Our results provided information about the structural requirements for optimal activity of the [R₄W₄] template. When tryptophan was replaced with other hyd...
Bacterial drug resistance has become a serious problem worldwide as a consequence of long-term use and misuse of antibiotics. Current research trends indicate the development of anti-microbial peptides (AMPs) as a promising alternative to conventional antibiotics and to tackle antibiotic resistance. In the present work, novel short AMPs containing less than 15 amino acids with potential broad-spectrum activity are de-novo designed. A computational database-guided pipeline of rational analysis and modification is developed and utilized based on established principles of AMP activity such as charge, hydrophobicity, length, amino-acid frequency, charge density and hydrophobic moments. Potential broad-spectrum AMP sequences are designed based on a consecutive refinement strategy in which seed AMP sequences with desirable properties are predicted from scratch and then modified for possible improvement inactivity. Finally, four AMP sequences were designed, synthesized and tested for their efficacy in-vitro for broad spectrum anti-microbial activity against major drug resistant pathogens namely two Gram-positive organisms Staphylococcus aureus, Bacillus cereus and two Gram-negative pathogens Klebsiella aerogenes and Klebsiella pnuemoniae. Based on the inhibitory concentrations, two among the four designed peptides namely PEP01 (GKIMYILTKKS) and PEP03 (FGIKLRSVWKR) showed best results as broad-spectrum AMPs among which the sequence of PEP03 is further projected as a better candidate in terms of its predicted cell-penetrating and non-toxic nature.
Antimicrobial activity of rationally designed amino terminal modified peptides
Bioorganic & Medicinal Chemistry Letters, 2007
Series of short amino terminal modified cationic peptides were designed and synthesized. All of the synthesized compounds were tested against gram-positive as well as gram-negative bacterial strain. Some of the compounds exhibit potent antibacterial activity and no hemolytic activity even at high dose level (1000 lg/mL) in mammalian erythrocytes was observed.
Rational development of antimicrobial peptides for
2013
The emergence of drug-resistant pathogenic microbial strains has created an urgent need for new anti-infective molecule development. In order to avoid the spread of bacterial resistance, there is pressing demand to design a novel class of antibiotics having different mechanism of action in comparison to existing drugs. Natural antimicrobial peptides (AMPs) represent a novel class of molecules with a broad spectrum of activity and a low rate in inducing bacterial resistance. However, until now, many AMPs have failed in clinical trials because of several drawbacks that strongly limit their applicability such as degradation, cytotoxicity and high production cost. Thus, to overcome the limitations of native peptides, a rational in-silico approach to AMPs design becomes a promising strategy that drastically reduce production costs and the time required for evaluation of activity and toxicity. This chapter will focus on the strategies and methods for de-novo design of potentially active AMPs.
ChemInform Abstract: Computational Design of Highly Selective Antimicrobial Peptides
ChemInform, 2010
We have created a structure-selectivity database (AMPad) of frog-derived, helical antimicrobial peptides (AMPs), in which the selectivity was determined as a therapeutic index (TI), and then used the novel concept of sequence moments to study the lengthwise asymmetry of physicochemical peptide properties. We found that the cosine of the angle between two sequence moments obtained with different hydrophobicity scales, defined as the D-descriptor, identifies highly selective peptide antibiotics. We could then use this descriptor to predict TI changes after point mutations in known AMPs, and to aid the prediction of TI for de noVo designed AMPs. In combination with an amino acid selectivity index, a motif regularity index and other statistical rules extracted from AMPad, the D-descriptor enabled construction of the AMP-Designer algorithm. A 23 residue, glycine-rich, peptide suggested by the algorithm was synthesized and the activity and selectivity tested. This peptide, adepantin 1, is less than 50% identical to any other AMP, has a potent antibacterial activity against the reference organism, E. coli, and has a significantly greater selectivity (TI > 200) than the best AMP present in the AMPad database (TI ) 125). 2. METHODS 2.1. AMPad Database. AMP sequences and corresponding MIC and HC 50 concentrations were obtained from a comprehensive literature survey and used to create the AMPad database (Supporting Information and corresponding references). Published results were selected only where
Antibacterial Activity of Rationally Designed Antimicrobial Peptides
International Journal of Microbiology
Many infectious diseases are still prevalent in the world’s populations since no effective treatments are available to eradicate them. The reasons may either be the antibiotic resistance towards the available therapeutic molecules or the slow rate of producing adequate therapeutic regimens to tackle the rapid growth of new infectious diseases, as well as the toxicity of current treatment regimens. Due to these reasons, there is a need to seek and develop novel therapeutic regimens to reduce the rapid scale of bacterial infections. Antimicrobial Peptides (AMPs) are components of the first line of defense for prokaryotes and eukaryotes and have a wide range of activities against Gram-negative and Gram-positive bacteria, fungi, cancer cells, and protozoa, as well as viruses. In this study, peptides which were initially identified for their HIV inhibitory activity were further screened for antibacterial activity through determination of their kinetics as well as their cytotoxicity. From...
Antimicrobial Agents and Chemotherapy, 2013
ABSTRACTThe emergence of multidrug-resistant (MDR) pathogens underscores the need for new antimicrobial agents to overcome the resistance mechanisms of these organisms. Cationic antimicrobial peptides (CAPs) provide a potential source of new antimicrobial therapeutics. We previously characterized a lytic base unit (LBU) series of engineered CAPs (eCAPs) of 12 to 48 residues demonstrating maximum antibacterial selectivity at 24 residues. Further, Trp substitution in LBU sequences increased activity against bothP. aeruginosaandS. aureusunder challenging conditions (e.g., saline, divalent cations, and serum). Based on these findings, we hypothesized that the optimal length and, therefore, the cost for maximum eCAP activity under physiologically relevant conditions could be significantly reduced using only Arg and Trp arranged to form idealized amphipathic helices. Hence, we developed a novel peptide series, composed only of Arg and Trp, in a sequence predicted and verified by circular ...
Antimicrobial Agents and Chemotherapy, 2005
Comparison of human immunodeficiency virus lentiviral lytic peptide 1 with other host-derived peptides indicates that antimicrobial properties of membrane-active peptides are markedly influenced by their cationic, hydrophobic, and amphipathic properties. Many common themes, such as Arg composition of the cationic face of an amphipathic helix and the importance of maintaining the hydrophobic face, have been deduced from these observations. These studies suggest that a peptide with these structural properties can be derived de novo by using only a few strategically positioned amino acids. However, the effects of length and helicity on antimicrobial activity and selectivity have not been objectively evaluated in the context of this motif. To address these structure-function issues, multimers of a 12-residue lytic base unit (LBU) peptide composed only of Arg and Val residues aligned to form idealized amphipathic helices were designed. Bacterial killing assays and circular dichroism analyses reveal a strong correlation between antibacterial activity, peptide length, and propensity to form a helix in solvent mimicking the environment of a membrane. Increasing peptide length beyond two LBUs (24-residue peptides) resulted in no appreciable increase in antimicrobial activity. Derivatives (WLBU) of the LBU series were further engineered by substituting Trp residues in the hydrophobic domains. The 24-residue WLBU2 peptide was active at physiologic NaCl concentrations against Staphylococcus aureus and mucoid and nonmucoid strains of Pseudomonas aeruginosa. Further, WLBU2 displayed the highest antibacterial selectivity of all peptides evaluated in the present study by using a coculture model of P. aeruginosa and primary human skin fibroblasts. These findings provide fundamental information toward the de novo design of an antimicrobial peptide useful for the management of infectious diseases.