Polysaccharide-based self-assembling nanohydrogels: an overview on 25-years research on Pullulan (original) (raw)
Related papers
Pharmaceutics
A cationic derivative of pullulan was obtained by grafting reaction and used together with dextran sulfate to form polysaccharide-based nanohydrogel cross-linked via electrostatic interactions between polyions. Due to the polycation-polyanion interactions nanohydrogel particles were formed instantly and spontaneously in water. The nanoparticles were colloidally stable and their size and surface charge could be controlled by the polycation/polyanion ratio. The morphology of the obtained particles was visualized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). The resulting structures were spherical, with hydrodynamic diameters in the range of 100–150 nm. The binding constant (Ka) of a model drug, piroxicam, to the cationic pullulan (C-PUL) was determined by spectrophotometric measurements. The value of Ka was calculated according to the Benesi—Hildebrand equation to be (3.6 ± 0.2) × 103 M−1. After binding to cationic pul...
International Journal of Advanced Chemistry, 2020
The present study is aimed at designing a pullulan based hydrogel through grafting technique for slow release of fluorouracil drug. To achieve this, pullulan grafted acrylic acid was synthesized and characterized by FTIR, and FESEM analyses. Swelling was done in different pH solutions with better swelling in pH 2. As such, the drug loading was done in the specified pH environment. The release profile revealed that more than 90 % of the drug could be released within 5 days. The prepared hydrogel may be considered as stimuli responsive materials for oral drug delivery of anti-cancer drugs.
International Journal of Biological Macromolecules, 2020
A new amphiphilic pullulan derivative (DBAP-PO) was obtained by grafting tertiary butyl amine and octanoyl groups on the pullulan backbone as cationic and hydrophobic moieties, respectively. The structural characteristics of the modified polymer were investigated by FT-IR and 1 H and 13 C NMR spectroscopy. The self-association ability in aqueous solution of DBAP-PO was studied by viscosity and fluorescence methods. The intrinsic viscosity of the polymer was determined by Wolf model. The critical aggregation concentration (CAC) value of 0.028 g/dL, determined by fluorescence measurements in the presence of pyrene, was confirmed by capillary viscosimetry and dynamic laser scattering (DLS). Dialysis method was used to demonstrate the capacity of the pullulan derivative to form spherical nanoparticles (d~200 nm) loaded with model drug, sodium diclofenac (DF) (74% entrapment efficiency). The DF release was sustained and pH-dependent. In vitro cytotoxicity as well as morphological studies conducted on the human skin fibroblasts showed that DBAP-PO/DF nanoparticles do not exhibit cytotoxic effects at the pharmacologically relevant concentration of DF, maintaining the typical morphology of the cells.
Biomimetic hydrogel by enzymatic crosslinking of pullulan grafted with ferulic acid
Carbohydrate Polymers, 2020
A novel eco-friendly two-step synthesis process of neutral pullulan (PUL)-ferulic acid (FA) conjugates was reported in this work. Ferulic acid was first transformed to activated ferulate-imidazolide using N,N'-carbonyldiimidazole (CDI), a green activated reagent. Issued product was then reacted with pullulan. PUL-FA derivatives were characterized by FTIR and 1 H NMR leading to substitution degrees (DS) between 0.02 and 0.1 (mol FA per mol PUL repeat unit). The study in dilute regime indicated an associative behavior with the presence of aggregate structures in solution due to the hydrophobic interactions between the grafted FA onto polysaccharide backbones. Laccase from Trametes versicolor was then used to crosslink polysaccharide chains to obtain biomimetic PUL-FA hydrogels. Gelling's kinetics were analyzed with rheology in dynamic mode showing the impact of laccase amount, DS and concentration. Mechanical and swelling properties appear related only to DS and concentration of PUL-FA products.
Self-Assembled pH-Sensitive Cholesteryl Pullulan Nanogel As a Protein Delivery Vehicle
Biomacromolecules, 2013
A self-assembled nanogel, derived from an acidlabile cholesteryl-modified pullulan (acL-CHP), was prepared by grafting vinyl ether-cholesterol substituents onto a 100 kD pullulan main chain polymer backbone. Stable nanogels are formed by acL-CHP self-assemblies at neutral pH. The hydrodynamic radius of the nanogels, observed to be 26.5 ± 5.1 nm at pH 7.0, increased by ∼135% upon acidification of the solution to pH 4.0. SEC analysis of the acL-CHP nanogel at pH 4.0 showed that the grafts were nearly 80% degraded after 24 h, whereas little or no degradation was observed over the same time period for a pH stable analog (acS-CHP) at pH 4.0 or the acL-CHP at pH 7.0. Complexation of BSA with the acL-CHP nanogel was observed at pH 7.0 with subsequent release of the protein upon acidification. These findings suggest that stimuli-responsive, self-assembled nanogels can release protein cargo in a manner that is controlled by the degradation rate of the cholesterol-pullulan grafting moiety.
Journal of pharmacy & pharmaceutical sciences : a publication of the Canadian Society for Pharmaceutical Sciences, Société canadienne des sciences pharmaceutiques, 2004
The purpose of this study was to prepare crosslinked pullulan nanoparticles encapsulating bioactive molecules inside the aqueous core of Aerosol-OT/n-hexane reverse micellar droplets with narrow size distribution for drug and gene delivery applications. The nanoparticles have been characterised by various physico-chemical methods such as dynamic light scattering (DLS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), loading capacity and in vitro release behaviour in aqueous buffer. The influence of these nanoparticles on human dermal fibroblasts in vitro has been assessed in terms of cell adhesion, cytotoxicity and light microscopy. Size distribution studies using DLS and TEM show that the particles are spherical in shape with size of 42.0+/-2.5 nm diameter. Release of FITC-Dex from nanoparticles increased with time with 75% of dye released in 6 hours, while only 40% of the dye was released in the initial 2 hours. Results from cell adhesion/viability assa...
Macromolecules, 1997
Various cholesterol-bearing pullulans (CHPs) with different molecular weights of the parent pullulan and degrees of substitution (DS) of the cholesteryl moiety were synthesized. The structural characteristics of CHPs in water were studied by static (SLS) and dynamic light scattering (DLS) and the fluorescence probe method. Irrespective of the molecular weight of the parent pullulan and the DS, all of CHPs provided unimodal and monodisperse self-aggregates in water. The size of the self-aggregate decreased with an increase in the DS of the cholesteryl moiety (hydrodynamic radius, 8.4-13.7 nm). However, the aggregation number of CHP in one nanoparticle was almost independent of the DS. The polysaccharide density within the self-aggregate (0.13-0.50 g/mL) was affected by both the molecular weight and the DS of CHPs. The mean aggregation number of the cholesteryl moiety (3.5-5.7), which was estimated by the fluorescence quenching method using pyrene and cetylpyridinium chloride, was almost same for all the CHP self-aggregates. The CHP self-aggregate is regarded as a hydrogel nanoparticle, in which pullulan chains are cross-linked noncovalently by associating cholesteryl moieties. The microenvironment inside or the structural characteristic of the self-aggregate was spectrometrically studied using a fluorescence probe, ANS. The characteristic temperature to cause a structural change of the nanoparticle (T*) decreased with an increase in the DS of CHP and the ionic strength of the medium. The thermoresponsiveness of the nanoparticle hydrogel is related to the partial dehydration of the hydrophobized pullulan upon heating.
Technologies and Formulation Design of Polysaccharide-Based Hydrogels for Drug Delivery
Molecules, 2020
Polysaccharide-based hydrogel particles (PbHPs) are very promising carriers aiming to control and target the release of drugs with different physico-chemical properties. Such delivery systems can offer benefits through the proper encapsulation of many drugs (non-steroidal and steroidal anti-inflammatory drugs, antibiotics, etc) ensuring their proper release and targeting. This review discusses the different phases involved in the production of PbHPs in pharmaceutical technology, such as droplet formation (SOL phase), sol-gel transition of the droplets (GEL phase) and drying, as well as the different methods available for droplet production with a special focus on prilling technique. In addition, an overview of the various droplet gelation methods with particular emphasis on ionic cross-linking of several polysaccharides enabling the formation of particles with inner highly porous network or nanofibrillar structure is given. Moreover, a detailed survey of the different inner texture,...
Pullulan-based nanoparticles as carriers for transmucosal protein delivery
European Journal of Pharmaceutical Sciences, 2013
Polymeric nanoparticles have revealed very effective in transmucosal delivery of proteins. Polysaccharides are among the most used materials for the production of these carriers, owing to their structural flexibility and propensity to evidence biocompatibility and biodegradability. In parallel, there is a preference for the use of mild methods for their production, in order to prevent protein degradation, ensure lower costs and easier procedures that enable scaling up. In this work we propose the production of pullulan-based nanoparticles by a mild method of polyelectrolyte complexation. As pullulan is a neutral polysaccharide, sulfated and aminated derivatives of the polymer were synthesized to provide pullulan with a charge. These derivatives were then complexed with chitosan and carrageenan, respectively, to produce the nanocarriers. Positively charged nanoparticles of 180-270 nm were obtained, evidencing ability to associate bovine serum albumin, which was selected as model protein. In PBS pH 7.4, pullulan-based nanoparticles were found to have a burst release of 30% of the protein, which maintained up to 24h. Nanoparticle size and zeta potential were preserved upon freeze-drying in the presence of appropriate cryoprotectants. A factorial design was approached to assess the cytotoxicity of raw materials and nanoparticles by the metabolic test MTT. Nanoparticles demonstrated to not cause overt toxicity in a respiratory cell model (Calu-3). Pullulan has, thus, demonstrated to hold potential for the production of nanoparticles with an application in protein delivery.