Determining critical conditions for two dimensional compost piles with air flow via numerical simulations (original) (raw)
Related papers
Modelling the Effects of Moisture Content in Compost Piles
This paper considers the self-heating process occurring in a compost pile using one- and two-dimensional spatially-dependent models and incorporating terms that account for self-heating due to both biological and oxidative mechanisms. Biological heat generation is known to be present in most industrial processes handling large volumes of bulk organic materials. The heat release rate due to biological activity is modelled by a function which is, at sufficiently low temperatures, a monotonically increasing function of temperature and, at higher temperatures, a monotonically decreasing function of temperature. This functionality represents the fact that micro-organisms die or become dormant at high temperatures. The heat release rate due to oxidation reactions is modelled by Arrhenius kinetics. As moisture is another crucial factor in the degradation process of compost, this model consists of four mass-balance equations, namely, energy, oxygen, vapour and liquid water concentrations. A...
A two dimensional, reaction-diffusion model of compost piles
We consider the self heating process in a two dimensional spatially dependent model of a compost pile which incorporates terms that ac-count for self heating due to both biological and oxidation mechanisms. As moisture is a crucial factor in both the degradation process and spontaneous ignition within a compost pile, this model consists of four mass-balance equations, namely, energy, oxygen, vapour and liquid water concentrations. Analyses are undertaken for different initial water contents within the compost pile. We show that when the water content is too low, the reaction is almost negligible; whereas when it is too high, the reaction commences only when the water content evaporates and the water ratio drops to within an appropriate range. However, for an intermediate water content range, the biological reac-tion is at its optimum and there is a possibility of spontaneous ignition within the compost pile. Download the paper from http://journal.austms.org.au/ojs/index.php/ANZIAMJ/...
ANZIAM Journal
Industrial compost piles contain large volumes of bulk organic materials. Normally, there are two main heat generation processes—oxidation of cellulosic materials and biological activity within the compost pile. Biological heating occurs at a lower temperature range, but it may `kick-start' the oxidation reaction. Nevertheless, biological heating is desirable and is a key component in composting operations. However, there are cases when the temperature within the compost piles increases beyond the ignition temperature of cellulosic materials which can result in spontaneous ignition. This investigation considers the self-heating process that occurs in a compost pile using a two-dimensional spatially-dependent model incorporating terms that account for self-heating due to both biological and oxidative mechanisms. The variation of temperature distribution within different pile geometries is examined. References P. C. Bowes. Self heating: evaluating and controlling the hazard. Amste...
Waste management (New York, N.Y.), 2012
The aeration rate is a key process control parameter in the forced aeration composting process because it greatly affects different physico-chemical parameters such as temperature and moisture content, and indirectly influences the biological degradation rate. In this study, the effect of a constant airflow rate on vertical temperature distribution and organic waste degradation in the composting mass is analyzed using a previously developed mathematical model of the composting process. The model was applied to analyze the effect of two different ambient conditions, namely, hot and cold ambient condition, and four different airflow rates such as 1.5, 3.0, 4.5, and 6.0 m(3) m(-2) h(-1), respectively, on the temperature distribution and organic waste degradation in a given waste mixture. The typical waste mixture had 59% moisture content and 96% volatile solids, however, the proportion could be varied as required. The results suggested that the model could be efficiently used to analyz...
Mathematical Model of Compost Pile Temperature Prediction
A mathematical model of heat balance was developed to predict the compost temperature during the maturation stage. The components of the energy balance of the compost pile which include: heat gained (heat generation and solar radiation) and heat lost (radiation, evaporation, convection, and conduction) at different ambient temperatures. The model was able to predict the pile temperature at different ambient temperatures (15, 20, 25, 30 and 35°C) and different airflow rates (0.7, 1.1 and 1.5 mg air s-1 kg-1 dry matter). The results showed that the pile temperature increases with increasing ambient temperature and it decreases with increasing airflow rates, where, as the ambient temperature increased from 15 to 35°C, the pile temperature increased from 33.40 to 37.41°C, and when the airflow rates increased from 0.7 to 1.5 mg air s-1 kg-1 dry matter, the pile temperature decreased from 34.40 to 32.39°C. The pile temperature increased slightly and reached a maximum value at day 14. It indicates that the net energy gained to the pile increases with increasing ambient temperature, meanwhile, the heat lost decreases with increasing ambient temperature. The model results indicated that the predicted daily temperature was in a reasonable agreement with those measured ones and other data in literature (Barrena et al. and Ahn et al.) at different ambient temperatures and airflow rates, where, it ranged from 30.30 to 73.40°C, while it was from 18.0 to 71.0°C experimentally during the whole period of compost maturation.