Effect of heat treatment on the microstructure change and mechanical properties for the Ni–19Si–3Nb–0.15B intermetallic alloy (original) (raw)

Effect of Heat Treatment on the As-Cast Microstructure and Hardness of NiSi3B2 Alloy

Pedro Caetano Gonçalves Lacerda

2021

View PDFchevron_right

Dependence of Strain Rate and Environment on the Mechanical Properties of the Ni-19Si-3Nb-1Cr-0.2B Intermetallic Alloy at High Temperature

Shian-Ching Jang

Materials Science Forum, 2007

View PDFchevron_right

The effect of boron on the microstructure and mechanical behavior of an Ni�19Si�3Nb based alloy

Shian-Ching Jang

Mater Sci Eng a Struct Mater, 2000

View PDFchevron_right

Characterization, corrosion resistance and hardness of rapidly solidified Ni–Nb alloys

Carlos Alberto Della Rovere

Journal of Alloys and Compounds, 2020

View PDFchevron_right

Improving the ductility-dip cracking resistance of Ni-base alloys

Antonio Ramirez

Journal of Materials Processing Technology, 2006

View PDFchevron_right

Ductilization of Ni3Al by alloying with boron and zirconium

P. Hyjek, Iwona Sulima

View PDFchevron_right

Processing and Properties of Nb-Ti-Based Alloys

Srinath Viswanathan

Superalloys 1992 (Seventh International Symposium), 1992

View PDFchevron_right

Characterisation of 20Cr32Ni1Nb alloys in as-cast and Ex-Service conditions by SEM, TEM and EDX

Qizhi Chen

View PDFchevron_right

Mechanical alloying of NiNb in different atmospheres

Valeri Portnoy

Journal of Alloys and Compounds, 1995

View PDFchevron_right

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Shian-Ching Jang

Materials Science and Engineering: A, 1995

View PDFchevron_right

The recovery of tensile ductility in diffusion-bonded Ni-base alloys by post-bond heat treatments

Changheui Jang

Materials & Design, 2013

View PDFchevron_right

Role of Nb3Si in high temperature deformation of a cast Nb - 10 a/o Si in-situ composite

M Saqib

Scripta Metallurgica et Materialia, 1992

View PDFchevron_right

Effect of NB and Ti on the Ductility Dip Cracking of Ni-Base Alloys Weld Metal

Antonio Ramirez

ABM Proceedings, 2008

View PDFchevron_right

Room temperature tensile ductility in polycrystalline B2 Ni-30Al-20Fe

Sumit Guha

Scripta metallurgica, 1989

View PDFchevron_right

Formation of a multimodal grain structure and its influence on the strength and the ductility of the intermetallic compound Ni3Al

EVGENY BOYANGIN

Russian Metallurgy (Metally), 2014

View PDFchevron_right

Effect of 2, 5, 7, and 9 at.% Al on the solution heat-treated (1280 C, 50 hours, water quenched) structure of Ni-20at.% Mo alloy

Edward Kenik

Mater Charact, 1999

View PDFchevron_right

Microstructure and mechanical behavior of in situ Ni–Ni3Si composite

Peterson Ferrandini

Journal of Alloys and Compounds, 2007

View PDFchevron_right

The development of Nb-based advanced intermetallic alloys for structural applications

P.r. Subramanian

1996

View PDFchevron_right

Formation of stable and metastable phases in Ni–Al–Nb and Ni–Al–Me–C (Me=Ti, Nb or V) powder systems during mechanical alloying and thermal treatment

Valeri Portnoy

Journal of Alloys and Compounds, 2002

View PDFchevron_right

Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties

Josef Pešička

Metalurgija, 2013

View PDFchevron_right

Influence of heat treatment on Microstructure and properties of ultrahigh strength Fe-Ni-Co alloy

hamed hoseiny

2013

View PDFchevron_right

Microstructure and room temperature mechanical properties of Hf and Sn-doped Nb-20Ti-5Cr-3Al-18Si alloy

reza saputra

International Journal of Materials Research, 2008

View PDFchevron_right

Relation between ductility and grain boundary character distributions in Ni3Al

Toshi Abe

Acta Metallurgica et Materialia, 1994

View PDFchevron_right

Microstructure and tensile property characterization of a nickel-containing zinc-based alloy: effects of heat treatment and test conditions

B.K. Prasad

Materials Science and Engineering: A, 2000

View PDFchevron_right

Mechanically alloyed Ni50Ti50 and its transformation by thermal treatments

Jose G Cabanas-Moreno

Journal of Materials Science, 1994

View PDFchevron_right

Physicochemical fundamentals of the development of heat-resistant niobium alloys

E. N. Sheftel

Metal Science and Heat Treatment, 1982

View PDFchevron_right

The Influence of the Soaking Temperature Rotary Forging and Solution Heat Treatment on the Structural and Mechanical Behavior in Ni-Rich NiTi Alloy

Patricia Rodrigues

Materials, 2021

View PDFchevron_right

Microstructure investigation in B2-phased Ni-25Al-40Fe intermetallic compound

Jien-wei Yeh

Scripta Materialia, 1996

View PDFchevron_right

Compressive strength of a B2 matrix NiAlNb intermetallic at 1200 and 1300 K

J.daniel Whittenberger

Scripta Metallurgica, 1989

View PDFchevron_right

Microstructure Evolution of a Nickel-Base Alloy Resistant to High Temperature during Aging

Cesar Lanz

Journal of Minerals and Materials Characterization and Engineering, 2016

View PDFchevron_right

Effect of partial and full substitution of Ni with NiB on densification, structure and properties of 90W-6Ni-2Fe-2Co heavy alloys

Pradyut Sengupta

Journal of Alloys and Compounds, 2019

View PDFchevron_right

Effects of testing environment on the elevated temperature ductility of boron-doped Ni3Al

Alan Taub

Scripta Metallurgica

View PDFchevron_right

Effect of Gallium on microstructure and mechanical properties of Nb–Si eutectic alloy

Sanjay Kashyap

Intermetallics, 2011

View PDFchevron_right

Compressive properties of zone-directionally solidified β-NiAl and its off-eutectic alloys with chromium and tungsten

Rohit Tiwari

Materials Science and Engineering: A, 2002

View PDFchevron_right

Microstructure evolution and mechanical properties of intermetallic Ni–xSi (x=5, 10, 15, 20) alloys

Mustafa Keskin

Journal of Alloys and Compounds, 2012

View PDFchevron_right