IJERT-Towards Smart Water Quality Monitoring System for Urban Environment (original) (raw)
Related papers
SMART WATER MANAGEMENT AND WATER QUALITY MONITORING BY USING INTERNET OF THINGS
Transstellar Journals, 2022
One of the main concerns for green globalization is water contamination. Environmental monitoring is a fascinating system that plays a significant role in human life in the twenty-first century. Water quality must be monitored in real time to maintain the safe supply of drinking water and other water-related activities. This document shows a little effort stage progression and plan. The Arduino Uno microcontroller is used in this project, along with many sensors linked to the platform. The gadget, which consists of a variety of sensors, is used to measure the physical and chemical properties of water in diverse places. Factors like PH, Temperature and turbidity for water quality can be estimated. It is possible to quantify quality. The output of the sensors is kept in a data logger and transferred to the cloud over the Internet. As an acidic base, we can tell if the water is drinkable or not. In this research work, three sensors are used. These sensors are pH, Temperature sensor and ORP sensor.
Low-Cost Internet-of-Things Water-Quality Monitoring System for Rural Areas
Sensors
Water is a vital source for life and natural environments. This is the reason why water sources should be constantly monitored in order to detect any pollutants that might jeopardize the quality of water. This paper presents a low-cost internet-of-things system that is capable of measuring and reporting the quality of different water sources. It comprises the following components: Arduino UNO board, Bluetooth module BT04, temperature sensor DS18B20, pH sensor—SEN0161, TDS sensor—SEN0244, turbidity sensor—SKU SEN0189. The system will be controlled and managed from a mobile application, which will monitor the actual status of water sources. We propose to monitor and evaluate the quality of water from five different water sources in a rural settlement. The results show that most of the water sources we have monitored are proper for consumption, with a single exception where the TDS values are not within proper limits, as they outperform the maximum accepted value of 500 ppm.
Design and Development of IoT Device to Measure Quality of Water
—The conventional method of measuring the quality of water is to take the samples manually and send it to laboratory for analysis. This technique is time overwhelming and not economical. Also it is not feasible to take the water sample to the laboratory after every hour for measuring its quality. To overcome from these problems a new system is proposed in this work. This water quality measuring system will measure the essential qualities of water in real time. The proposed system consists of multiple sensors to measure the standard of water, Raspberry Pi 2 and Ethernet Local Area Network (LAN) to send the information to the controlling center. It's a real time system which is able to endlessly measure the standard of water and send the measured values to the controlling center in each predefined time. The system relies on sensors, Raspberry Pi 2 and Internet.
Implementation of Internet of Things for Water Quality Monitoring
International Journal of Trend in Scientific Research and Development, 2019
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time-consuming. The system for monitoring the water quality in the Internet of Things (IoT) consists of a number of sensors which are used for measuring the parameters of the water; these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office; using thinger.io which is an open source IoT platform as free server; data can be continuously pushed on the cloud so we can see data in real-time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi-Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real-time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller.
Water is a limited resource used in our day to day life for agricultural, recreational, domestic and for a healthy living. So it has become a necessity for adequate and integrated water management such as water level and quality monitoring and to check its efficient usage. Wireless Sensor Network technology helps to monitor the quality of water with the help of sensors immersed in water so as to keep the water resource within the standard that is described for domestic usage and allow to take necessary actions to restore the health of the degraded water. IOT has been used for sensing the parameters and to connect with the GSM. The sensor nodes consist of PIC microcontroller, GSM and water quality sensors to measure the parameters such as pH, water level and gases. Data collected from different nodes will be displayed in the PC. The data collected from the sensors are being sent to the cloud center using GSM modem which is enabled using SIM card. These data values can be viewed in the website or the android application on a recurring basis. The motor can be controlled from the website or the android application that has been created. The asset of the developed system is that it's compact, optimal usage of power and can be installed easily.
Design and Implementation of a Low-Cost Portable Water Quality Monitoring System
Computers, materials & continua, 2021
Water is one of the needs with remarkable significance to man and other living things. Water quality management is a concept based on the continuous monitoring of water quality. The monitoring scheme aims to accumulate data to make decisions on water resource descriptions, identify real and emergent issues involving water pollution, formulate priorities, and plan for water quality management. The regularly considered parameters when conducting water quality monitoring are turbidity, pH, temperature, conductivity, dissolved oxygen, chemical oxygen demand, biochemical oxygen demand, ammonia, and metal ions. The usual method employed in capturing these water parameters is the manual collection and sending of samples to a laboratory for detection and analysis. However, this method is impractical in the long run because it is laborious and consumes a considerable amount of human resources. Sensors integrated into a mobile phone application interface can address this issue. This paper aims to design and implement an Internet of Things-based system comprising pH, temperature, and turbidity sensors, which are all integrated into a mobile phone application interface for a water monitoring system. This project utilizes the Bluetooth Standard (IEEE 802.15.1) for communication/transfer of data, while the water quality monitoring system relies on the pH, turbidity, and temperature of the test water.
Real Time Water Quality Monitoring System for Smart City in Malaysia
ASEAN Journal of Science and Engineering, 2021
Water is essential for life. Frequent water disruption in Malaysia caused turbulence in daily lives and livelihood of thousands Malaysian. The water operators in Malaysia are facing serious challenges to ensure consumers have continuous access to clean water and to ensure a sustainable water future. River pollution in Malaysia had been identified to be one of the causes of water crisis in Malaysia. Hence, a continuous monitoring system utilizing the concept of Internet of Things had been proposed in this paper. Agile model is used due to its simplicity. The water’s pH measurement, turbidity, temperature and flow can be measured and the reading will be sent to end-user. The sensors that detects the pH value, turbidity, temperature and flow measurement of a water sample will pass through the information to the Arduino, and the result will be shown on the mobile devices via an app called Blynk. This portable and comprehensive prototype is suitable to be used in Smart Cities where WiF...
Water Quality Monitoring System Based on IOT
As water is one of the basic needs of human survival, it is required to incorporate some mechanism to monitor water quality time to time. There is a necessity to ensure supply of purified drinking water for the people both in cities and villages. Water Quality Monitoring (WQM) is a cost-effective and efficient system designed to monitor drinking water quality which makes use of Internet of Things (IoT) technology. In this project, the proposed system consists of several sensors to measure various parameters such as pH value, Turbidity, Total Dissolved Solids (TDS), Temperature and Conductivity. And also, the Microcontroller Unit (MCU) interfaced with these sensors and further processing is performed at mobile app. The obtained data is sent to the cloud by using IoT based Think Speak application to monitor the quality of the water.
Smart Water Quality Monitoring System using IOT and Electronic Sensors
International Journal for Research in Applied Science & Engineering Technology (IJRASET), 2022
Water plays an Important role in our day to day life, our body consists of 70% of water, and the major diseases are caused due to the bad quality of water. How much ever we filter the water their might be few impurities in it, so we are using Internet of Things technology and sensors to measure the quality of water. Internet Of Things (IOT) is used in different area of research for monitoring and collecting data on a particular project. Smart Water Quality Monitoring System is necessary nowadays due to increase in pollution and other industrial waste which is being dumped in the water bodies, which makes water polluted even after purifying it. Around 40% of the death's are caused due to water pollution around the world. With the help of smart water quality monitoring system we can find out if the water is pure or impure at an affordable cost.
Real Time Water Quality Monitoring and Management System
IRJET, 2022
Water pollution has been an increasing problem over the decade. The conventional method of testing water quality is to assemble samples of water physically and send them to the lab to test and analyze. This paper proposes a Real Time Water Quality Monitoring & Management system; which will allow water quality monitoring at household levels as well as help in limiting the use of this natural resource. The objective of the proposed water quality monitoring system based on the technology of internet of things (IoT), is to observe the nature and quality of the tap water i.e., how the pH content & total dissolved solids (TDS) content varies and to provide a user-friendly interface with infographics and meters to illustrate the quality factors. For development of this system, the developers will be using an Uno R3 ATmega328p Arduino Development Board and sensors for finding pH value, TDS content & flow rate of the tap water and a GSM module for message technique.