Detection of RAG protein-V(D)J recombination signal interactions near the site of DNA cleavage by UV cross-linking (original) (raw)
Related papers
Nucleic Acids Research, 1997
The recombination activating gene (RAG) 1 and 2 proteins are required for initiation of V(D)J recombination in vivo and have been shown to be sufficient to introduce DNA double-strand breaks at recombination signal sequences (RSSs) in a cell-free assay in vitro. RSSs consist of a highly conserved palindromic heptamer that is separated from a slightly less conserved A/T-rich nonamer by either a 12 or 23 bp spacer of random sequence. Despite the high sequence specificity of RAG-mediated cleavage at RSSs, direct binding of the RAG proteins to these sequences has been difficult to demonstrate by standard methods. Even when this can be demonstrated, questions about the order of events for an individual RAG-RSS complex will require methods that monitor aspects of the complex during transitions from one step of the reaction to the next. Here we have used template-independent DNA polymerase terminal deoxynucleotidyl transferase (TdT) in order to assess occupancy of the reaction intermediates by the RAG complex during the reaction. In addition, this approach allows analysis of the accessibility of end products of a RAG-catalyzed cleavage reaction for N nucleotide addition. The results indicate that RAG proteins form a long-lived complex with the RSS once the initial nick is generated, because the 3′-OH group at the nick remains obstructed for TdT-catalyzed N nucleotide addition. In contrast, the 3′-OH group generated at the signal end after completion of the cleavage reaction can be efficiently tailed by TdT, suggesting that the RAG proteins disassemble from the signal end after DNA double-strand cleavage has been completed. Therefore, a single RAG complex maintains occupancy from the first step (nick formation) to the second step (cleavage). In addition, the results suggest that N region diversity at V(D)J junctions within rearranged immunoglobulin and T cell receptor gene loci can only be introduced after the generation of RAG-catalyzed DNA double-strand breaks, i.e. during the DNA end joining phase of the V(D)J recombination reaction.
Single-molecule analysis of RAG-mediated V(D)J DNA cleavage
Proceedings of the National Academy of Sciences of the United States of America, 2015
The recombination-activating gene products, RAG1 and RAG2, initiate V(D)J recombination during lymphocyte development by cleaving DNA adjacent to conserved recombination signal sequences (RSSs). The reaction involves DNA binding, synapsis, and cleavage at two RSSs located on the same DNA molecule and results in the assembly of antigen receptor genes. We have developed single-molecule assays to examine RSS binding by RAG1/2 and their cofactor high-mobility group-box protein 1 (HMGB1) as they proceed through the steps of this reaction. These assays allowed us to observe in real time the individual molecular events of RAG-mediated cleavage. As a result, we are able to measure the binding statistics (dwell times) and binding energies of the initial RAG binding events and characterize synapse formation at the single-molecule level, yielding insights into the distribution of dwell times in the paired complex and the propensity for cleavage on forming the synapse. Interestingly, we find th...
Genes & Development, 2002
In addition to creating the DNA double strand breaks that initiate V(D)J recombination, the RAG proteins are thought to play a critical role in the joining phase of the reaction. One such role, suggested by in vitro studies, might be to ensure the structural integrity of postcleavage complexes, but the significance of such a function in vivo is unknown. We have identified RAG1 mutants that are proficient in DNA cleavage but defective in their ability to interact with coding ends after cleavage and in the capture of target DNA for transposition. As a result, these mutants exhibit severe defects in hybrid joint formation, hairpin coding end opening, and transposition in vitro, and in V(D)J recombination in vivo. Our results suggest that the RAG proteins have an architectural function in facilitating proper and efficient V(D)J joining, and a protective function in preventing degradation of broken ends prior to joining.
Molecular Cell, 2009
To obtain structural information on the early stages of V(D)J recombination, we isolated a complex of the core RAG1 and RAG2 proteins with DNA containing a pair of cleaved recombination signal sequences (RSS). Stoichiometric and molecular mass analysis established that this signal-end complex (SEC) contains two protomers each of RAG1 and RAG2. Visualization of the SEC by negative-staining electron microscopy revealed an anchor-shaped particle with approximate two-fold symmetry. Consistent with a parallel arrangement of DNA and protein subunits, the N termini of RAG1 and RAG2 are positioned at opposing ends of the complex, and the DNA chains beyond the RSS nonamer emerge from the same face of the complex, near the RAG1 N termini. These first images of the V(D)J recombinase in its postcleavage state provide a framework for modeling RAG domains and their interactions with DNA.
Nucleic Acids Research, 2009
The RAG proteins initiate V(D)J recombination by mediating synapsis and cleavage of two different antigen receptor gene segments through interactions with their flanking recombination signal sequences (RSS). The protein-DNA complexes that support this process have mainly been studied using RAG-RSS complexes assembled using oligonucleotide substrates containing a single RSS that are paired in trans to promote synapsis. How closely these complexes model those formed on longer, more physiologically relevant substrates containing RSSs on the same DNA molecule (in cis) remains unclear. To address this issue, we characterized discrete core and full-length RAG protein complexes bound to RSSs paired in cis. We find these complexes support cleavage activity regulated by V(D)J recombination's '12/23 rule' and exhibit plasticity in RSS usage dependent on partner RSS composition. DNA footprinting studies suggest that the RAG proteins in these complexes mediate more extensive contact with sequences flanking the RSS than previously observed, some of which are enhanced by full-length RAG1, and associated with synapsis and efficient RSS cleavage. Finally, we demonstrate that the RAG1 C-terminus facilitates hairpin formation on long DNA substrates, and fulllength RAG1 promotes hairpin retention in the postcleavage RAG complex. These results provide new insights into the mechanism of physiological V(D)J recombination.
Cell, 1995
Formation of double-strand breaks at recombination signal sequences is an early step in V(D)J recombination. Here we show that purified RAG1 and RAG2 proteins are sufficient to carry out this reaction. The cleavage reaction can be divided into two distinct steps. First, a nick is introduced at the 5' end of the signal sequence. The other strand is then broken, resulting in a hairpin structure at the coding end and a blunt, 5'-phosphorylated signal end. The hairpin is made as a direct consequence of the cleavage mechanism. Nicking and hairpin formation each require the presence of a signal sequence and both RAG proteins.
Cooperative recruitment of HMGB1 during V(D)J recombination through interactions with RAG1 and DNA
Nucleic Acids Research, 2013
During V(D)J recombination, recombination activating gene (RAG)1 and RAG2 bind and cleave recombination signal sequences (RSSs), aided by the ubiquitous DNA-binding/-bending proteins high-mobility group box protein (HMGB)1 or HMGB2. HMGB1/2 play a critical, although poorly understood, role in vitro in the assembly of functional RAG-RSS complexes, into which HMGB1/2 stably incorporate. The mechanism of HMGB1/2 recruitment is unknown, although an interaction with RAG1 has been suggested. Here, we report data demonstrating only a weak HMGB1-RAG1 interaction in the absence of DNA in several assays, including fluorescence anisotropy experiments using a novel Alexa488-labeled HMGB1 protein. Addition of DNA to RAG1 and HMGB1 in fluorescence anisotropy experiments, however, results in a substantial increase in complex formation, indicating a synergistic binding effect. Pulldown experiments confirmed these results, as HMGB1 was recruited to a RAG1-DNA complex in a RAG1 concentration-dependent manner and, interestingly, without strict RSS sequence specificity. Our finding that HMGB1 binds more tightly to a RAG1-DNA complex over RAG1 or DNA alone provides an explanation for the stable integration of this typically transient architectural protein in the V(D)J recombinase complex throughout recombination. These findings also have implications for the order of events during RAG-DNA complex assembly and for the stabilization of sequence-specific and nonspecific RAG1-DNA interactions.
Nucleic Acids Research, 2003
RAG1 and RAG2 catalyze the initial DNA cleavage steps in V(D)J recombination. Fundamental properties of these proteins remain largely unknown. Here, self-association and conformational properties of murine core RAG1 (residues 384±1008) were examined. As determined by multi-angle laser light scattering measurements, the molecular masses of two predominant core RAG1 species corresponded to dimeric and tetrameric states. Similar results were obtained using a RAG1 fragment containing residues 265±1008, indicating that a non-core portion of RAG1 does not alter the oligomerization states observed for the core region. The fraction of core RAG1 in the tetrameric state increased signi®cantly at lower ionic strengths (0.2 versus 0.5 M NaCl), indicating that this oligomeric form may factor into the physiological function of RAG1. In addition, the secondary structural content of core RAG1, obtained by circular dichroism spectroscopy, demonstrated a signi®cant dependence on ionic strength with a 26% increase in a-helical content from 0.2 to 1.0 M NaCl. Together, these results indicate that structural and oligomerization properties of core RAG1 are strongly dependent on electrostatic interactions. Furthermore, the secondary structure of core RAG1 changes upon binding to DNA, with larger increases in a-helical content upon binding to the recombination signal sequence (RSS) as compared with non-sequence-speci®c DNA. As shown by electrophoretic mobility shift assays, higher order oligomeric forms of core RAG1 bound to the canonical RSS. Furthermore, core RAG2 (residues 1±387) formed complexes with multimeric RAG1 species bound to a single RSS, providing additional support for the physiological relevance of higher order oligomeric states of RAG1.
Journal of Experimental Medicine, 1997
Antigen receptor gene rearrangement is directed by DNA motifs consisting of a conserved heptamer and nonamer separated by a nonconserved spacer of either 12 or 23 base pairs (12 or 23 recombination signal sequences [RSS]). V(D)J recombination requires that the rearranging DNA segments be flanked by RSSs of different spacer lengths, a phenomenon known as the 12/23 rule. Recent studies have shown that this restriction operates at the level of DNA cleavage, which is mediated by the products of the recombination activating genes RAG1 and RAG2. Here, we show that RAG1 and RAG2 are not sufficient for 12/23 dependent cleavage, whereas RAG1 and RAG2 complemented with whole cell extract faithfully recapitulates the 12/23 rule. In addition, HMG box containing proteins HMG1 and HMG2 enhance RAG1 -and RAG2 -mediated cleavage of substrates containing 23 RSS but not of substrates containing only 12 RSS. These results suggest the existence of a nucleoprotein complex at the cleavage site, consisting of architectural, catalytic, and regulatory components.