Distributed Intelligent Energy Management System for a Single-Phase High-Frequency AC Microgrid (original) (raw)
Related papers
Enhanced Intelligent Energy Management System for a Renewable Energy-based AC Microgrid
Energies, 2020
This paper proposes an enhanced energy management system (EEMS) for a residential AC microgrid. The renewable energy-based AC microgrid with hybrid energy storage is broken down into three distinct parts: a photovoltaic (PV) array as a green energy source, a battery (BT) and a supercapacitor (SC) as a hybrid energy storage system (HESS), and apartments and electric vehicles, given that the system is for residential areas. The developed EEMS ensures the optimal use of the PV arrays' production, aiming to decrease electricity bills while reducing fast power changes in the battery, which increases the reliability of the system, since the battery undergoes fewer charging/discharging cycles. The proposed EEMS is a hybrid control strategy, which is composed of two stages: a state machine (SM) control to ensure the optimal operation of the battery, and an operating mode (OM) for the best operation of the SC. The obtained results show that the EEMS successfully involves SC during fast load and PV generation changes by decreasing the number of BT charging/discharging cycles, which significantly increases the system's life span. Moreover, power loss is decreased during passing clouds phases by decreasing the power error between the extracted power by the sources and the required equivalent; the improvement in efficiency reaches 9.5%.
Intelligent Energy Management System using AC Microgrid for Renewable Energy Integration
The intelligent energy management system is operated automatically to ON and OFF the generating sources as per the load demand. The renewable energy sources used in this energy management system are solar, wind, fuel cell and energy storage element battery as an input source. These renewable energy sources are integrated into the main dc bus through dc-ac converter. Microgrid is basically a group of large power grid. The renewable energy sources producing variable ac, variable dc and fixed dc. So, the converters in this are used to convert variable dc to fixed ac. The dc-ac converter is used for controlling the maximum amount of energy for the requirement of load demand. The Microgrid is operated in the real time and also for the load demand requirement. The ac microgrid is connected to the load for distribution. The Arduino is the microcontroller giving feedback to the inverters and converters.
IJEER, 2022
A modern hybrid model is introduced, which is a combination of PV, Wind turbine, converter components to improve Microgrid (MG) operation, to improve system dependability, effective efficiency, which are fundamental qualities. In view of renewable energy Maximum Power Point Tracking (MPPT) is frequently applied to improve PV efficiency in which randomness, flexibility of solar energy because of changes in temperature. To achieve MPPT P&O rule, Incremental conductance (IC) methods are implemented in this manuscript. The design, execution of EMS with Fuzzy Logic Controller (FLC) for AC/DC microgrid is implemented. Apart from designing of EMS the power quality of MG is improved. It proposes analysis, control of storage devices. The FLC improves battery life and also will achieve desirable SoC. An FLC based EMS grid integrated MG is adopted, to mitigate power quality issues under nonlinear, unbalanced load conditions. The proposed model is executed by adopting MATLAB/SIMULINK.
Fuzzy logic power management for a PV/wind microgrid with backup and storage systems
International Journal of Electrical and Computer Engineering (IJECE), 2021
This work introduces a power management scheme based on the fuzzy logic controller (FLC) to manage the power flows in a small and local distributed generation system. The stand-alone microgrid (MG) includes wind and PV generators as main power sources. The backup system includes a battery storage system (BSS) and a diesel generator (DG) combined with a supercapacitor (SC). The different energy sources are interconnected through the DC bus. The MG is modeled using MATLAB/Simulink Sim_Power System™. The SC is used to compensate for the shortage of power during the start-up of the DG and to compensate for the limits on the charging/discharging current of the BSS. The power balance of the system is the chief objective of the proposed management scheme. Some performance indexes are evaluated: the frequency-deviation, the stability of the DC bus voltage, and the AC voltage total harmonic distortion. The performance of the planned scheme is assessed by two 24-hours simulation sets. Simulation results confirm the effectiveness of FLC-based management. Moreover, the effectiveness of the FLC approach is compared with the deterministic approach. FLC approach has saved 18.7% from the daily load over the deterministic approach. The study shows that the quality of the power signal in the case of FLC is better than the deterministic approach.