Large-scale photonic integration: a key-enabling technology for all-optical signal processing (original) (raw)
Related papers
Multi-format all-optical processing based on a large-scale, hybridly integrated photonic circuit
Optics Express, 2011
We investigate through numerical studies and experiments the performance of a large scale, silica-on-silicon photonic integrated circuit for multi-format regeneration and wavelength-conversion. The circuit encompasses a monolithically integrated array of four SOAs inside two parallel Mach-Zehnder structures, four delay interferometers and a large number of silica waveguides and couplers. Exploiting phase-incoherent techniques, the circuit is capable of processing OOK signals at variable bit rates, DPSK signals at 22 or 44 Gb/s and DQPSK signals at 44 Gbaud. Simulation studies reveal the wavelength-conversion potential of the circuit with enhanced regenerative capabilities for OOK and DPSK modulation formats and acceptable quality degradation for DQPSK format. Regeneration of 22 Gb/s OOK signals with amplified spontaneous emission (ASE) noise and DPSK data signals degraded with amplitude, phase and ASE noise is experimentally validated demonstrating a power penalty improvement up to 1.5 dB.
Innovative optical components and their impact on future optical transmission systems
Optical Transmission, Switching, and Subsystems, 2004
Optical transmission systems made impressive progress in the field of system capacity, reach and flexibility. Beside all improvements achieved so far, signal distortion on the one hand side and noise accumulation on the other hand side are the limitations of optical transmission system performance. In terms of signal distortion besides advanced link design strategies optical regenerators are of high interest for signal conditioning along a fiber link. Our paper reviews signal regeneration techniques focusing on fiber nonlinearity based setups both in interferometric and non interferometric architecture. We analyze the impact of regenerator design parameters as fiber nonlinear parameters, regenerator input power and characteristics of filters on signal improvement and demonstrate e.g. the increase of system reach. In order to address the upcoming techniques of advanced modulation formats we introduce a fiber based regenerator scheme that shows attractive potential especially for phase modulated signals. Combining these new optical formats with regenerative methods is attractive for high performance systems. For the differential phase shift keying (DPSK) modulation format we investigate the potential of a cross phase modulation based type of regenerator in more detail. The availability of suitable regenerator components, especially highly nonlinear fibers is one of the challenges. Especially the new fiber types known as photonic crystal fibers can act as bases for new structures and thus will open the door for ultra high performance optical transmission systems.
Current Status of Large-Scale InP Photonic Integrated Circuits
IEEE Journal of Selected Topics in Quantum Electronics, 2000
In this paper, the current state of the art for largescale InP photonic integrated circuits (PICs) is reviewed with a focus on the devices and technologies that are driving the commercial scaling of highly integrated devices. Specifically, the performance, reliability, and manufacturability of commercial 100-Gb/s dense wavelength-division-multiplexed transmitter and receiver PICs are reviewed as well as next-and future-generation devices (500 Gb/s and beyond). The large-scale PIC enables significant reductions in cost, packaging complexity, size, fiber coupling, and power consumption which have enabled benefits at the component and system level.
All-Optical Regeneration Using InP-Based Photonic Integrated Circuits
During the last years we have pioneered several new concepts for 2R optical regeneration. Two of these concepts, an active 2x2 multi mode interference (MMI) coupler and a Mach Zehnder interferometer with a regular semiconductor optical amplifier in one arm and an active 1x1 MMI in the other arm, have been fabricated as photonic integrated circuits. A third regenerator, a Mach-Zehnder interferometer with Gain-Clamped Semiconductor Optical Amplifiers (GCSOA) in both arms, has been implemented using a fiber interferometer and commercial GCSOA's. An extinction ratio improvement of around 15 dB as well as noise reduction has been demonstrated with all 3 concepts. In addition, one of the concepts has been demonstrated at 10 Gb/s.
Agile photonic integrated systems-on-chip enabling WDM terabit networks
… (ICTON), 2011 13th …, 2011
The ICT-APACHE research project is focusing on the development of cost-effective, compact, scalable and agile integrated components capable of generating, regenerating and receiving multi-level encoded data signals for high capacity (>100 Gb/s) WDM optical networks. APACHE technology relies on InP active, monolithic chips, hybridly integrated on silica-on-silicon planar lightwave platforms in order to achieve cost-efficiency, high yield, low power consumption and device scaling beyond the level commercially available today. The APACHE integration approach is implemented in a two-dimensional plan, horizontally and vertically, in order to enable multi-functionality and increased capacity, respectively. The final goal of the APACHE project is the fabrication of integrated arrays of transmitters, receivers and regenerators that will operate with 100 Gb/s OOK, DPSK and DQPSK modulated signals, allowing for 1 Terabit/s on-chip capacity.
IEEE Journal of Selected Topics in Quantum Electronics, 2000
An overview of commercially available large-scale photonic integrated circuits (PICs) in indium phosphide is provided. Results of 100-Gb/s PICs that are field-deployed in wavelength-division-multiplexing (WDM) networks is provided, along with development results showing scaling of both channel count and channel bit rate to implement next-generation PICs with an aggregate capacity of 1.6 Tb/s. Use of PIC-enabled WDM systems allows affordable optical-electrical-optical (OEO) conversion and the implementation of "digital" optical networks with enhanced sub-wavelength reconfigurable bandwidth management, digital performance monitoring, and protection features. PICs will enable the continued capacity scaling required for next-generation IP core networks and support of high-bandwith 40-G and 100-GbE service connectivity between core routers.
InP-Based Monolithic Photonic Integrated Devices
IEICE Transactions on Electronics, 2009
We present our recent work on monolithically integrated devices comprising a variety of functional elements such as high speed optical transmitters and receivers, electro-absorption modulators integrated with tunable dispersion compensators and fast-tunable wavelength converters.