Effects of Top-hat Laser Beam Processing and Scanning Strategies in Laser Micro-Structuring (original) (raw)
Micromachines
The uniform energy distribution of top-hat laser beams is a very attractive property that can offer some advantages compared to Gaussian beams. Especially, the desired intensity distribution can be achieved at the laser spot through energy redistribution across the beam spatial profile and, thus, to minimize and even eliminate some inherent shortcomings in laser micro-processing. This paper reports an empirical study that investigates the effects of top-hat beam processing in micro-structuring and compares the results with those obtainable with a conventional Gaussian beam. In particular, a refractive field mapping beam shaper was used to obtain a top-hat profile and the effects of different scanning strategies, pulse energy settings, and accumulated fluence, i.e., hatch and pulse distances, were investigated. In general, the top-hat laser processing led to improvements in surface and structuring quality. Especially, the taper angle was reduced while the surface roughness and edge d...
Related papers
Applied Physics A
Ablation with ultrashort laser pulses as a surface micromachining tool was studied using a hybrid die-excimer laser system that has high energy per laser pulse (tens of mJ’s), about 600 fs pulse duration and low repetition rate (2 Hz). The effect of ablation on the material microstructure with this high energy pulsed laser system was studied. Micropillars were fabricated by laser ablation using a spot size of hundreds of micrometers. Two methods were tested for micromachining. Multiple laser pulse ablation on a standing sample resulted in a columnar microscturcure around the micropillars. This unwanted structure was avoided by beam scanning, resulting in a rather homogeneous ditch. By HR-EBSD measurement it was found that the heat affected zone is less than 1 \mu \textrm{m}$$ μ m , which was confirmed by numerical temperature simulations, too. The dislocation density measured below the specimen surface was unaltered, meaning that no significant crystal degradation occurred. In sum...
Laser Beam MicroMachining (LBMM) -A review
Optics and Lasers in Engineering, 2015
The use of short and ultrashort laser pulses for micromachining application is an emerging technology. Laser Beam MicroMachining (LBMM) has revolutionized many industries by providing innovative solutions in numerous industrial micro-engineering applications. High-intensity short or ultrashort laser pulses are powerful thermal energy source for creating micro-features in wide range of materials. These lasers can precisely ablate various types of materials with little or no collateral damage. An overview of LBMM is given so that we can obtain a current view of capabilities and tradeoffs associated with LBMM of sub-micron size. The fundamental understanding of ultrafast laser ablation process has been elucidated and the various research activities performed with nanosecond, picosecond and femtosecond, lasers have been discussed to understand the physical mechanisms and the critical experimental parameters involved in the LBMM. The critical analysis of various theoretical and experimental models used to describe the performance analysis of LBMM has been elaborated so that we can identify the relevant principles underlying the process.
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.