Analysis of cladding modes in an asymmetric dual-core fiber (original) (raw)
Related papers
Cladding effects in single-mode fiber: space and polarization phenomena
Physics and Simulation of Optoelectronic Devices IV, 1996
The work presents results of the measurement ofspatial and polarization far-field characteristics of the output radiation from the double-clad fiber. The beam width is found to depend on the input conditions. Polarization characteristics of the beam show existence of spatially-incoherent fields in the fiber which cause depolarization of the total output field. Theoretical interpretation of the effects is done in the framework of the modal approach. By means of numerical simulations is shown that far-field output beam width, as well as it's degree of polarization depends on the input gaussian beam spatial parameters due to interference between core mode and cladding modes of the fiber.
Experimental excitation and characterization of cladding modes in photonic crystal fiber
Optics Express, 2010
We extend the previous theoretical study on the effect of outer silica cladding to the analysis on real field profiles in a practical PCF. Clear field profiles for the first higher-order cladding modes are presented and discussed. The observed mode fields are reproduced by numerical calculations, and it turns out that they correspond to LP 16 mode groups. Optical properties of the observed modes such as lobe direction and polarization are also investigated. The results of this study will be useful in the design of the PCF-based optical devices utilizing cladding mode coupling.
Propagation characteristics of a segmented cladding fiber
Optics Letters, 2001
We propose a novel optical fiber design that consists of a uniform core and a segmented cladding formed by alternate regions of high and low refractive indices in the azimuthal direction. The structure is analyzed by use of the radial effective-index method, and the propagation characteristics of the structure are studied. The fiber has a highly dispersive cladding and shows characteristics similar to those of photonic-crystal fibers and holey fibers. The novel fiber offers the possibility of single-mode operation over a wide range of wavelengths with a large core diameter.
By using the method of separation of variables in the elliptical coordinate system, a representative formula in terms of Mathieu and modified Mathieu functions is derived and longitudinal field components for the even and odd modes are presented for the proposed fiber. The eigen value equation for the fiber to be considered is obtained by solving the fourth order determinantal equation under weak guidance condition and is given in this paper. The cutoff frequency of several lower orders modes for different eccentricities have been obtained and their propagation characteristics have been plotted. The effect of the eccentricity on the modal cutoff values and mode transmissions is discussed. Finally, the modal birefringence in the proposed fiber is also estimated.
Optics Communications, 2007
In this paper, bending loss and mode field diameter (MFD) of two new multi-clad single mode optical fibers are investigated. Effects of optical and geometrical parameters in these fibers on bending loss and MFD are examined. The simulated results indicate that with increase of core radius (a), that is excellent in practice, bending loss and MFD coefficients are decreased. Thus, large core radius in these fibers for optimization of bending loss can be used. We show that type-II optical fiber is so sensitive to optical and geometrical parameters than type-I. Based on the presented simulations, it can be said that bending loss for a given MFD, strongly depends on profile of field distribution in the cladding region. On the other hand, field amplitude and rate of damping in the cladding region determine bending loss of the fiber.
Modal and coupling characteristics of low-order modes in thermally diffused expanded core fibers
Optik, 2009
Optical intensity distributions, cut off frequencies and propagation constants for the loworder modes of Thermally-Diffused Expanded Core (TEC) Fibers are demonstrated by numerical analysis based on Galerkin's method. A set of orthogonal Laguerre-Gauss functions is used to calculate the spectral dependence of effective indices and mode fields of LP-modes. Results are compared with and shown to be accurately approximated by those obtained by an one-parameter variational method.
2009
The geometric polarization in single mode optical fibers is investigated theoretically and experimentally and the measurement results are reported. This paper consider the geometrical measurement method of weights the own modes of poorly directing optical fiber with strong linear anisotropy. This given method is based on definition the geometrical parameters lines with equal intensity in a vicinity of zero radiation image from fiber output. The modes weights have been received as a result of computer processing of experimental images of intensity distribution at displacement of laser spot concerning the center of fiber input. It is found that neglecting the geometrical birefringence, even under the weakly guiding approximation, can lead to significant errors in the calculation of PMD and the zero PMD wavelengths. It is also found that one can obtain zero PMD in the single-mode region even by applying a suitable differential stress along the major axis. This is very attractive since ...
Mode Birefringence in Multi-Core Microstructure Fibres
2006 International Conference on Transparent Optical Networks, 2006
We analyse the difference of the effective indices and radiation loss of the two modes with identical field distribution propagating in dual-core microstructure fibres as well as their polarisation behaviour in dependence on the fibre parameters (air hole diameter, hole separation, distance between guiding cores) and bend. The optimisation of the parameters of such fibres using as vector bend sensors is considered.
Modal analysis of polarisation effects in weakly-guiding fibres
IEE Proceedings H Microwaves, Optics and Antennas
A complete set of modes of the scalar wave equation on a circular fibre of arbitrary refractive-index profile is presented as a basis for perturbation analyses of a range of optical waveguide problems. Using these modes, we have generalised, in a systematic way, results which were previously known only for the step-index fibre, namely (i) the degree of birefringence in a monomode fibre whose core is slightly elliptical and (ii) the vector corrections to the modal fields due to the nonzero difference between the refractive indexes of the core and cladding. The validity of the perturbation theory for birefringence has also been verified by considering higher-order perturbations.
Microwave and Optical Technology Letters, 2003
A discussion of the dispersion relation of the modes guided by an annular core fiber is done in order to prove that the fundamental mode has a zero cutoff. It also gives the inequalities satisfied by the cutoff frequencies of the first lower modes. A relation is established between the propagation constants of two modes with the same radial order but different azimuthal orders. It allows us to precisely set the conditions for these constants to be almost similar. Numerical results are shown to confirm these assertions.