A Critical Review of Thermodiffusion Models: Role and Significance of the Heat of Transport and the Activation Energy of Viscous Flow (original) (raw)
Related papers
Dynamic thermodiffusion model for binary liquid mixtures
Physical Review E, 2009
Following the nonequilibrium thermodynamics approach, we develop a dynamic model to emulate thermodiffusion process and propose expressions for estimating the thermal diffusion factor in binary nonassociating liquid mixtures. Here, we correlate the net heat of transport in thermodiffusion with parameters, such as the mixture temperature and pressure, the size and shape of the molecules, and mobility of the components, because the molecules have to become activated before they can move. Based on this interpretation, the net heat of transport of each component can be somehow related to the viscosity and the activation energy of viscous flow of the same component defined in Eyring's reaction-rate theory ͓S. Glasstone, K. J. Laidler, and H. Eyring, The Theory of Rate Processes: The Kinetics of Chemical Reactions, Viscosity, Diffusion and Electrochemical Phenomena ͑McGraw-Hill, New York, 1941͔͒. This modeling approach is different from that of Haase and Kempers, in which thermodiffusion is considered as a function of the thermostatic properties of the mixture such as enthalpy. In simulating thermodiffusion, by correlating the net heat of transport with the activation energy of viscous flow, effects of the above mentioned parameters are accounted for, to some extent of course. The model developed here along with Haase-Kempers and Drickamer-Firoozabadi models linked with the Peng-Robinson equation of sate are evaluated against the experimental data for several recent nonassociating binary mixtures at various temperatures, pressures, and concentrations. Although the model prediction is still not perfect, the model is simple and easy to use, physically justified, and predicts the experimental data very good and much better than the existing models.
Model with temperature-independent parameters for the viscosities of liquid mixtures
Industrial & Engineering Chemistry Research, 1991
On the basis of our previous reviaed free-volume theory, a new model with temperature-independent parameters is proposed for the calculation of viscosities for liquid mixtures. It is used to estimate and predict the viscosities for diverse binary and ternary mixtures, including aqueous and partially miscible systems. For 70 binaries (2033 data points), the grand absolute average deviation percent (AAD) is 1.60 from use of the parameters regressed from the data at a constant temperature. Moreover, for 23 ternaries (560 data points) the AAD is 2.76. A rigorous comparison with the Teja and Rice method indicates that our method is a good improvement.
Comparative Examination of Nonequilibrium Thermodynamic Models of Thermodiffusion in Liquids
Proceedings of 5th International Electronic Conference on Entropy and Its Applications
We analyze existing models for material transport in non-isothermal non-electrolyte liquid mixtures that utilize non-equilibrium thermodynamics. Many different sets of equations for material have been derived that, while based on the same fundamental expression of entropy production, utilize different terms of the temperature- and concentration-induced gradients in the chemical potential to express the material flux. We reason that only by establishing a system of transport equations that satisfies the following three requirements can we obtain a valid thermodynamic model of thermodiffusion based on entropy production, and understand the underlying physical mechanism: (1) Maintenance of mechanical equilibrium in a closed steady-state system, expressed by a form of the Gibbs–Duhem equation that accounts for all the relevant gradients in concentration, temperature, and pressure and respective thermodynamic forces; (2) thermodiffusion (thermophoresis) is zero in pure unbounded liquids ...
Unified Hydrodynamic Model of Thermodiffusion and Cross-Diffusion in Liquids
Journal of Non-Equilibrium Thermodynamics, 2007
Over the last six years, we have published a series of papers developing a hydrodynamic model of thermodi¤usion in liquids and liquid mixtures. Initial work focused on the movement of polymers dissolved in nonpolar solvents arising from the pressure gradient induced by asymmetry in polymer-solvent interactions as a result of the temperature-induced concentration gradient in the solvent. As that model was refined, we examined secondary e¤ects of a macroscopic pressure gradient in the solvent, and finally extended our hydrodynamic approach to cross-di¤usion and thermodi¤usion in solvent mixtures. Application of the model is currently limited to non-ionic liquids, where molecular interaction energies can be estimated by Hamaker constants or similar parameters. In this paper we present the body of work as a whole, in order to ensure a consistent nomenclature and unify the model for application to liquid mixtures in general. To test the model, values of Soret coe‰cients for mixtures of toluene and n-hexane have been calculated using parameters in the literature.
Modelling of thermal diffusion and thermodynamic restrictions
International Journal of Engineering Science, 2014
Upon a review of the balance equations for a mixture, diffusion fluxes are shown to satisfy an evolution equation which, with slight differences, describes diffusion relative to a constituent or relative to the barycentric reference. As a consequence, the particular case of binary mixtures is considered with the view of establishing a connection with the current models. The fact that the diffusion flux is governed by a balance (evolution) equation is quite unusual in the literature since customary models are based on constitutive equations (Fick's law, Soret and Dufour models). This in turn motivates the analysis for a more appropriate thermodynamic setting. The second law for the whole mixture, along with some constitutive assumptions in classical (nonequilibrium) thermodynamics, is shown to provide the constitutive equations which are currently applied in the literature. Instead, the model of diffusion flux through a balance equation proves to be fully consistent with rational thermodynamics and the assumption that the functions, relative to a single constituent, depend on variables pertaining to that constituent whereas interaction terms are allowed to depend also on quantities pertaining to the other constituents.
Eects of concentration and temperature on the coupled heat and mass transport in liquid mixtures
Using published experimental data on the thermal conductivity, mutual diusivity, and heats of transport, the degree of coupling between heat and mass ¯ows has been calculated for binary and ternary nonideal liquid mixtures. The binary mixtures consist of two types: the ®rst is six systems of six-to-eight-carbon straight and branched chain alkanes in chloroform and in carbon tetrachloride; and the second is mixtures of carbon tetrachloride with benzene, toluene, 2-propanone, n-hexane, and n-octane. The ternary mixture considered is toluene±chlorobenzene±bromoben-zene. The published data are available at 25°C, 30°C and 35°C and ambient pressure. Using the linear nonequilibrium thermodynamics (LNET) and the dissipation±phenomenological equation (DPE) approach, the eects of concentration , temperature, molecular weight, chain-length, solute, solvent, and branching on the degree of coupling are examined. The extent of coupling and the thermal diusion ratio are expressed in terms of the transport coecients to obtain a better understanding of the interactions between heat and mass ¯ows in liquid mixtures. It is found that the composition of the heavy component bromobenzene changes the direction and magnitude of the two-¯ow coupling in the ternary mixture.
Journal of Solution Chemistry, 2009
Shear viscosity deviation have been investigated by using density () and kinematic viscosity () measurements for isobutyric acid + water (IBA+W) mixtures over the entire range of mole fractions at atmospheric pressure and in two different temperatures (301.15 K and 315.15 K) to expand the temperature range of five other temperatures investigated in previous work, both far and close to the critical temperature (1.055 K ≤ (T -T c ) ≤ 14.055 K. This system exhibited very large positive values of η due to increased hydrogen bonding interactions and correlation length between unlike molecules in the critical region and to very large differences between the molar volumes of the pure components at low temperatures. The results were also fitted with the Redlich-Kister polynomial equations and the recently proposed Herráez correlation equation. Competition between the two models at different temperatures and parameters numbers is discussed. We note that, in this system, where the shear viscosity as a function of molar fraction (x 1 ) of IBA presents a maximum, experimental data are in agreement with the two correlation models when more than three parameters are employed, especially for temperatures far from critical temperature. 2 = 0.1114 (implying a precision of 0.025 %) critical mole fraction. We choose the binary fluid of (IBA-W) for the following reasons: Since their component densities are very close to each other, this mixture does not have density gradients induced by gravity. The critical temperature T c of (IBA-W) is low.
A New Equation Relating the Viscosity Arrhenius
In transport phenomena, precise knowledge or estimation of fluids properties is necessary, for mass flow and heat transfer computations. Viscosity is one of the important properties which are affected by pressure and temperature. In the present work, based on statistical techniques for nonlinear regression analysis and correlation tests, we propose a novel equation modeling the relationship between the two parameters of viscosity Arrhenius-type equation, such as the energy (𝐸 𝑎) and the preexponential factor (𝐴 𝑠). Then, we introduce a third parameter, the Arrhenius temperature (𝑇 𝐴), to enrich the model and the discussion. Empirical validations using 75 data sets of viscosity of pure solvents studied at different temperature ranges are provided fromprevious works in the literature and give excellent statistical correlations, thus allowing us to rewrite theArrhenius equation using a single parameter instead of two. In addition, the suggestedmodel is very beneficial for engineering data since it would permit estimating the missing parameter value, if a well-established estimate of the other parameter is readily available.