Polymer/Inorganic Hole Transport Layer for Low-Temperature-Processed Perovskite Solar Cells (original) (raw)
Related papers
A Hybrid Hole Transport Layer for Perovskite-Based Solar Cells
Energies, 2021
This paper presents the effect of a composite poly(3,4-ethylenedioxythiophene) polystyrene sulfonate PEDOT:PSS and copper-doped nickel oxide (Cu:NiOx) hole transport layer (HTL) on the performance of perovskite solar cells (PSCs). Thin films of Cu:NiOx were spin-coated onto fluorine-doped tin oxide (FTO) glass substrates using a blend of nickel acetate tetrahydrate, 2-methoxyethanol and monoethanolamine (MEA) and copper acetate monohydrate. The prepared solution was stirred at 65 °C for 4 h and spin-coated onto the FTO substrates at 3000 rpm for 30 s in a nitrogen glovebox. The Cu:NiOx/FTO/glass structure was then annealed in air at 400 °C for 30 min. A mixture of PEDOT:PSS and isopropyl alcohol (IPA) (in 1:0.05 wt%) was spun onto the Cu:NiOx/FTO/glass substrate at 4000 rpm for 60 s. The multilayer structure was annealed at 130 °C for 15 min. Subsequently, the perovskite precursor (0.95 M) of methylammonium iodide (MAI) to lead acetate trihydrate (Pb(OAc)2·3H2O) was spin-coated at 4...
High-Efficiency Solution-Processed Planar Perovskite Solar Cells with a Polymer Hole Transport Layer
Advanced Energy Materials, 2014
In this work we demonstrate a high-effi ciency solutionprocessed inverted CH 3 NH 3 PbI 3 perovskite solar cell, which is free of PEDOT:PSS and high-temperature processed metal oxides . We use poly[ N , N ′-bis(4-butylphenyl)-N , N ′bis(phenyl)benzidine] (poly-TPD) as the HTL and electron blocking layer for the perovskite cells. In previous reports, poly-TPD was used as an HTL in vacuum deposited perovskite solar cells. Here, the perovskite fi lm was formed by sequential deposition of lead iodide (PbI 2 ) and methyl ammonium iodide (CH 3 NH 3 I). We found that the resulting fi lm consisted of large crystallites with a complete coverage on the poly-TPD surface, and the average effi ciency of the fi nal devices reach a value of 13.8% and a maximum value as high as 15.3%.
Progress in hole-transporting materials for perovskite solar cells
Journal of Energy Chemistry, 2018
In recent years the photovoltaic community has witnessed the unprecedented development of perovskite solar cells (PSCs) as they have taken the lead in emergent photovoltaic technologies. The power conversion efficiency of this new class of solar cells has been increased to a point where they are beginning to compete with more established technologies. Although PSCs have evolved a variety of structures, the use of hole-transporting materials (HTMs) remains indispensable. Here, an overview of the various types of available HTMs is presented. This includes organic and inorganic HTMs and is presented alongside recent progress in associated aspects of PSCs, including device architectures and fabrication techniques to produce high-quality perovskite films. The structure, electrochemistry, and physical properties of a variety of HTMs are discussed, highlighting considerations for those designing new HTMs. Finally, an outlook is presented to provide more concrete direction for the development and optimization of HTMs for highefficiency PSCs.
Recent progress concerning inorganic hole transport layers for efficient perovskite solar cells
Journal, 2019
Typically, low cost as well as stability factors of the organo-metal halide perovskite solar cells based on inorganic hole transport layers (HTLs) have been the focus of intense research over the past few years. Accordingly, the power conversion efficiencies have rapidly been improved to ~ 20% with high stabilities. Therefore, this review covers the major advances of inorganic HTLs in perovskite solar cells that have contributed to the recent efficiencies and stabilities, including the evolution of device architecture, the development of hole transport material deposition processes, synthesis, morphology and the interface properties between inorganic HTLs and perovskite layers. Eventually, the challenges and future directions for inorganic HTLs-based perovskite solar cells are also discussed.
Conjugated polyelectrolyte hole transport layer for inverted-type perovskite solar cells
Nature communications, 2015
Organic-inorganic hybrid perovskite materials offer the potential for realization of low-cost and flexible next-generation solar cells fabricated by low-temperature solution processing. Although efficiencies of perovskite solar cells have dramatically improved up to 19% within the past 5 years, there is still considerable room for further improvement in device efficiency and stability through development of novel materials and device architectures. Here we demonstrate that inverted-type perovskite solar cells with pH-neutral and low-temperature solution-processable conjugated polyelectrolyte as the hole transport layer (instead of acidic PSS) exhibit a device efficiency of over 12% and improved device stability in air. As an alternative to PSS, this work is the first report on the use of an organic hole transport material that enables the formation of uniform perovskite films with complete surface coverage and the demonstration of efficient, stable perovskite/fullerene planar hetero...
Scientific reports, 2017
Herein, we successfully applied a facile in-situ solid-state synthesis of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a HTM, directly on top of the perovskite layer, in conventional mesoscopic perovskite solar cells (PSCs) (n-i-p structure). The fabrication of the PEDOT film only involved a very simple in-situ solid-state polymerisation step from a monomer 2,5-dibromo-3,4-ethylenedioxythiophene (DBEDOT) made from a commercially available and cheap starting material. The ultraviolet photoelectron spectroscopy (UPS) demonstrated that the as-prepared PEDOT film possesses the highest occupied molecular orbital (HOMO) energy level of -5.5 eV, which facilitates an effective hole extraction from the perovskite absorber as confirmed by the photoluminescence measurements. Optimised PSC devices employing this polymeric HTM in combination with a low-cost vacuum-free carbon cathode (replacing the gold), show an excellent power conversion efficiency (PCE) of 17.0% measured at ...
Nanomaterials, 2019
The performances of organometallic halide perovskite-based solar cells severely depend on the device architecture and the interface between each layer included in the device stack. In particular, the interface between the charge transporting layer and the perovskite film is crucial, since it represents both the substrate where the perovskite polycrystalline film grows, thus directly influencing the active layer morphology, and an important site for electrical charge extraction and/or recombination. Here, we focus on engineering the interface between a perovskite-polymer nanocomposite, recently developed by our group, and different commonly employed polymeric hole transporters, namely PEDOT: PSS [poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)], PEDOT, PTAA [poly(bis 4-phenyl}{2,4,6-trimethylphenyl}amine)], Poly-TPD [Poly(N,N′-bis(4-butylphenyl)-N,N′-bis(phenyl)-benzidine] Poly-TPD, in inverted planar perovskite solar cell architecture. The results show that when Poly-TPD is ...