Performance of thin film silicon MEMS on flexible plastic substrates (original) (raw)
Related papers
Design and fabrication of a Si micromechanical capacitive array for DNA sensing
Microelectronic Engineering, 2008
The design considerations and the fabrication process of a single chip capacitive sensor array suitable for chemical and DNA sensing are presented. Each sensor in the array consists of an ultra thin silicon membrane to be covered with receptor DNA. Upon exertion of surface stress, the membrane deflects resulting in a change in device capacitance. Finite element analysis (FEA) was applied to evaluate and optimize the response of the sensor. First experimental results on chemical substances are reported.
Contact-Printed Microelectromechanical Systems
Advanced Materials, 2010
Standard photolithography-based methods for fabricating microelectromechanical systems (MEMS) present several drawbacks including incompatibility with flexible substrates and limitations to wafer-sized device arrays. In addition, it is difficult to translate the favorable economic scaling seen in the capital equipment-intensive microelectronics industry to the manufacture of MEMS since additional specialized processes are required and wafer volume is comparatively small. Herein we describe a new method for rapid fabrication of metallic MEMS that breaks the paradigm of lithographic processing using an economically and dimensionally scalable, large-area microcontact printing method to define 3D electromechanical structures. This technique relies on an organic molecular release film to aid in the transfer of a metal membrane via kinetically controlled adhesion to a viscoelastic stamp. We demonstrate the fabrication of MEMS bridge structures and characterize their performance as variable capacitors. Flexible, paper-thin device arrays produced by this method may enable such applications as pressure sensing skins for aerodynamics, phased array detectors for acoustic imaging, and novel adaptive-texture display applications.
Frequency Characterization of a Magnetically Actuated Mems Resonant Biosensor
Proceedings of the International Conference on Biomedical Electronics and Devices, 2011
In this work, the mass response of a resonant, CMOS (Complementary MOS) compatible MEMS sensor, oriented at the detection of diagnostic markers, is presented. The sensor is fabricated with a MEMS (Microelectro-mechanical System) post-processing method on a standard, CMOS-based VLSI technology, retaining maximum compatibility with the CMOS process flow. The mechanical resonator is based on inductive actuation and detection, and the sensing is based on the microbalance principle. A protocol for covalent bonding of organo-functional silanes (to be used as link sites for biomolecular probes) on the resonator surface is presented. The effect on the mechanical frequency response of a test mass attached to the surface is demonstrated by grafting of gold nanoparticles (NP's) to the amino-terminated surface silanes.
Applications of the Microelectromechanical Systems in Nanoscience
European Respiratory Journal - EUR RESP J, 2005
The miniaturization and development of complex Micro Electro Mechanical Systems (MEMS) led to a need for an increase in performance of such systems in terms of displacement range, accuracy, velocity etc. There is a huge potential of using them as tools in nanonoscience such as high-density probe memory applications, scanning probe microscopy (e.g. nanolithography, prototyping of nanostructures), bio-physical applications (e.g. cell stimulation and monitoring), chemistry (e.g. trapping molecules in nano-gaps for further analysis). Recent development of such MEMS devices in the Transducers Science and Technology group, as well as experimental testing in different nano-scale related applications are presented. The work focuses on bidirectional and 2DOF (two degrees of freedom) microactuator stages, nano-positioning systems, and development of atomic force microscopy based applications and characterization techniques.
Design and Fabrication of Microactuators and Sensors for MEMS
2007 International Conference on Perspective Technologies and Methods in MEMS Design, 2007
This paper reports the results for various and other issues arise during this integration. The complexity, microelectromechanical systems, devices and structures functionality, specified capabilities, integration, packaging fabricated using bulk and surface micromachined and affordability requirements make the application of MEMS processes. These microelectromechanical systems (MEMS) technology an ideal solution. are designed and fabricated at the Semiconductor Micro-
Micro-Electromechanical Systems-based Sensors and Their Applications
Applied Science and Convergence Technology, 2022
For the past 20 years, microelectromechanical system (MEMS)-based sensors have been used as small, inexpensive sensors in manufacturing. A sensing device is a platform that monitors various physical or chemical signals between target molecules and transistors; then, these signal variations are achieved by an analyzing device with numerical or analog formats. MEMS sensors are highly practical for miniaturization due to their small dimensions, low energy consumption, high performance, and compatibility with batch fabrication. Medical societies and scientists have recently switched to adopting cost-effective and small-size biosensors to monitor and control the biological system, test food and water contaminants, detect different diseases, and more. Medical researchers seek a secure and low-cost method of conducting research, maintaining public surveillance, and offering patients with specialized health care facilities. Biosensors can be used to solve this problem quickly and easily. MEMS-based sensing technology is essential for a wide range of low-cost and improved-form-factors medical equipment. In this review, we provide an overview of recent developments in sensing mechanisms that can benefit MEMS sensors, with a focus on applications in the healthcare industry and their significant benefits in the medical field.
Microsensors Based on MEMS Technology
2007
Sensors play an important role in most of the common activities that occur in our daily lives. They are the building blocks of or microelectromechanical systems (MEMS). This combination of micromechanical structures, sensing elements, and signal conditioning is the beginning of a new era in sensor technology. Sensing systems incorporated with dedicated signal processing functions are called intelligent sensors or smart sensors. The present decade of new millennium will be the decade of smart systems or MEMS. The rapid rise of silicon MEMS recently was due to major advances in silicon microfabrication technology, especially surface micromachining, deep-reactive ion etching, and CMOS-integrated MEMS. In this paper, an overview of the currently available MEMS sensors, materials for sensors and their processing technologies, together with integraticm of sensors and electronics is presented.
Applied Physics Letters, 2014
The magnetic response of microdevices is significantly enhanced at structural resonance allowing for improved sensitivity and signal-to-noise ratio. Here, free-standing thin film CoFe bridge resonators have been fabricated and investigated. It is shown that the strong magnetic field dependence of the fundamental resonance frequency is a function of magnetic field orientation due to stress-induced anisotropy. These devices may offer a new approach for developing fully integrated resonant magnetic field sensing technology. V C 2014 AIP Publishing LLC.