Effect of buffer structures on AlGaN/GaN high electron mobility transistor reliability (original) (raw)

Journal of Vacuum Science & Technology B, 2013

Abstract

ABSTRACT AlGaN/GaN high electron mobility transistors (HEMTs) with three different types of buffer layers, including a GaN/AlGaN composite layer, or 1 or 2 μm GaN thick layers, were fabricated and their reliability compared. The HEMTs with the thick GaN buffer layer showed the lowest critical voltage (Vcri) during off-state drain step-stress, but this was increased by around 50% and 100% for devices with the composite AlGaN/GaN buffer layers or thinner GaN buffers, respectively. The Voff - state for HEMTs with thin GaN and composite buffers were ∼100 V, however, this degraded to 50–60 V for devices with thick GaN buffers due to the difference in peak electric field near the gate edge. A similar trend was observed in the isolation breakdown voltage measurements, with the highest Viso achieved based on thin GaN or composite buffer designs (600–700 V), while a much smaller Viso of ∼200 V was measured on HEMTs with the thick GaN buffer layers. These results demonstrate the strong influence of buffer structure and defect density on AlGaN/GaN HEMT performance and reliability.

F. Ren hasn't uploaded this paper.

Let F. know you want this paper to be uploaded.

Ask for this paper to be uploaded.