A Feasible Computational Fluid Dynamics Study for Relationships of Structural and Functional Alterations with Particle Depositions in Severe Asthmatic Lungs (original) (raw)
Computational and Mathematical Methods in Medicine
This study aims to investigate the effect of altered structures and functions in severe asthma on particle deposition by using computational fluid dynamics (CFD) models. Airway geometrical models of two healthy subjects and two severe asthmatics were reconstructed from computed tomography (CT) images. Subject-specific flow boundary conditions were obtained by image registration to account for regional functional alterations of severe asthmatics. A large eddy simulation (LES) model for transitional and turbulent flows was applied to simulate airflows, and particle transport simulations were then performed for 2.5, 5, and 10 μm particles using CFD-predicted flow fields. Compared to the healthy subjects, the severe asthmatics had a smaller air-volume change in the lower lobes and a larger air-volume change in the upper lobes. Both severe asthmatics had smaller airway circularity (Cr), but one of them had a significant reduction of hydraulic diameter (Dh). In severe asthmatics, the larg...
Related papers
BMC medical informatics and decision making, 2017
Chronic obstructive pulmonary disease (COPD) and asthma are considered as the two most widespread obstructive lung diseases, whereas they affect more than 500 million people worldwide. Unfortunately, the requirement for detailed geometric models of the lungs in combination with the increased computational resources needed for the simulation of the breathing did not allow great progress to be made in the past for the better understanding of inflammatory diseases of the airways through detailed modelling approaches. In this context, computational fluid dynamics (CFD) simulations accompanied by fluid particle tracing (FPT) analysis of the inhaled ambient particles are deemed critical for lung function assessment. Also they enable the understanding of particle depositions on the airways of patients, since these accumulations may affect or lead to inflammations. In this direction, the current study conducts an initial investigation for the better comprehension of particle deposition with...
In the present investigation, detailed two-phase flow modeling of airflow, transport and deposition of micro-particles (1–10 mm) in a realistic tracheobronchial airway geometry based on CT scan images under various breathing conditions (i.e. 10–60 l/min) was considered. Lagrangian particle tracking has been used to investigate the particle deposition patterns in a model comprising mouth up to generation G6 of tracheobronchial airways. The results demonstrated that during all breathing patterns, the maximum velocity change occurred in the narrow throat region (Larynx). Due to implementing a realistic geometry for simulations, many irregularities and bending deflections exist in the airways model. Thereby, at higher inhalation rates, these areas are prone to vortical effects which tend to entrap the inhaled particles. According to the results, deposition fraction has a direct relationship with particle aerodynamic diameter (for d p ¼1–10 mm). Enhancing inhalation flow rate and particle size will largely increase the inertial force and consequently, more particle deposition is evident suggesting that inertial impaction is the dominant deposition mechanism in tracheobronchial airways.
2019
In the present study, the realistic model of the human trachea with five generations that are obtained from computerized tomography scan images is considered. Due to the complexity of lung geometry, many researchers have used simple models. Therefore in the present study realistic model with all geometrical details are considered. The airflow behavior, particle transport and deposition in various conditions such as steady flow, transient flow, light breathing and heavy breathing condition for various micro-particles diameters are investigated. Governing equations are solved and obtained results show that the flow patterns in the realistic model are much more complicated than those of symmetrical models. Also, the particle deposition pattern in the realistic condition is very different from that of the symmetrical model and the details of the trachea are very important and affect the deposition fractions in the small airways. Also, results show that the turbulent effect should be cou...
In this work, the airflow behavior and particle transport and deposition in different breathing conditions such as light breathing condition (15 L/min), normal breathing condition (30 L/min) and heavy breathing condition (60 L/min) are investigated. The realistic geometry data was reconstructed from CT-scan images of the human airways with 0.5 mm thickness of slices. The CT-scan images (DICOM files) are imported in the 3D-DOCTOR software and all slices were segmented. Then, the output has been imported in CATIA-V5 software. Finally, face, volume, mesh and extension tubes at inlet and outlets were created and then imported into ANSYS FLUENT 15. The Lagrangian approach is used to evaluating the transport and deposition of inhaled micro-particles. The presented results showed that for dp = 5 μm and 10μm, when flow rate View the MathML source and for dp = 1 μm, when flow rate View the MathML source, the particle deposition fraction have maximum amount. For flow rate View the MathML source and View the MathML source, the maximum deposition occurs in the zone number 1 and for flow rate View the MathML source occurs in the zone number 4. Also, the maximum pressure distribution happens when flow rate View the MathML source which would be acceptable. According to the results, the particles tended to go to the right branch and the minimum number of particles crossed the zone numbers 6 and 11.
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.