WINNER II Channel Models (original) (raw)
Related papers
Overview of winner channel modelling activities
The European WINNER (Wireless World Initiative New Radio) project is developing a new radio concept for Beyond-3G (B3G) systems. The radio channel plays an important role in the evaluation of transceiver parameters such as modulation, coding, link adaptation, channel equalization, multi-user scheduling, etc., in terms of, e.g., bit-error-rate (BER), system throughput, and outage probability. Due to the lack of suitable channel models, new models were developed during the project based on existing literature and channel measurements. This paper introduces the radio channel modelling activities in WINNER and describes shortly the different channel models devel-oped during the project.
2007
FIGURE A. 1.4: MULTIPATH 5 FIGURE A. 1.5: MULTIPATH POWER DELAY PROFILE 6 FIGURE A. 1.6: TAPPED DELAY LINE MODEL 7 FIGURE A. 2.1: PARAMETERS OF THE COST-231 WI MODEL [MOLISCH2005] 10 FIGURE A. 2.2: STREET ORIENTATION ANGLE [CICHON] 11 FIGURE A. 2.5. 1: GENERIC STRUCTURE OF SUI CHANNEL MODELS 15
Implementation of a wideband directional channel model for link level simulations
IEE Seminar MIMO: Communications Systems from Concept to Implementation
This paper deals with the definition and the implementation of a Wideband Directional Channel Model (WDCM) based on the COST 259 recommendations. Cluster of replicas are introduced by means of Tapped Delay Line (TDL). Macro, Micro and Pico cells models are considered in different general radio environments. Proposed channel model can be used in a Link Level Simulator (LLS). A good compromise between accuracy of the model and complexity required by the simulator is guaranteed by a suitable statistic approach based on deterministic considerations. In this paper, only results about up-link channel model are presented and evaluated.
D1.2 Channel and Propagation Models
2021
This deliverable gives the results of the ARIADNE project's Task 1.2: Channel measurement<br> and modelling. The results herein comprise two years of work on channel measurement<br> setups, channel measurements, subsequent channel models, line-of-sight channel models for<br> gas and rain attenuation, reconfigurable intelligent surface channel modelling, ray tracing<br> models and the related results. As a whole, D1.2 gives the most of the channel models<br> required for subsequent modelling and analysis in other tasks of ARIADNE project.
Wireless Channel Models Ana Aguiar, James Gross
In this technical report analytical models of wireless channels are presented. The report addresses the reader interested in the various effects, which lead to the well known, unreliable and stochastic nature of wireless channels. The report is composed from various other books, reports and so, due to the reason that a comprehensive, but still easy understandable discussion of the matter for engineers working on protocols is hard to find. Instead many other presentations are quite specific, deal only with a certain amount of the ...
Large Scale Parameter for the WINNER II Channel Model at 2.53 GHz in Urban Macro Cell
2010 IEEE 71st Vehicular Technology Conference, 2010
This paper presents results of wide band channel measurements at 2.53 GHz for a representative urban macro cell environment in Ilmenau, Germany. The extensive channel sounding campaign covered the MIMO radio links from 22 mobile tracks to 3 different base stations and 1 relay station. The results presented in this paper provide insight into the large scale parameter analysis of the power, delay domain, including the transmission loss and the statistical distributions of the shadow fading, narrowband k-factor and delay spread. Large scale parameters from angle domain (azimuth and elevation) are derived based on the high resolution multipath parameter estimation (RIMAX). Furthermore the cross correlation of these parameters are investigated and compared to state-of-the-art channel models as from the IST-WINNER.
Propagation Models for Next Generation Networks in NS-3 : A Survey
2014
Simulations of mobile radio systems require propagation models for determining the channel characteristics for a given arbitrary scenario. Propagation path loss models can be used to predict wireless channel characteristics like received signal strength, multipath effects, and interference. These predictions are an important aspect of simulation of wireless networks and aid in the high-level network planning process. Various models are available for modeling propagation characteristics and they vary in terms of both modeling performance and computational complexity. Propagation path loss models can be used to predict wireless channel characteristics like received signal strength, multipath effects, and interference. This paper includes the discussion on next generation networks and propagation models in NS3.