Fretting wear behavior of zirconium alloy in B-Li water at 300 °C (original) (raw)

Journal of Nuclear Materials

Abstract

Abstract The tangential fretting wear of three kinds of zirconium alloys tube mated with 304 stainless steel (SS) plate was investigated. The tests were conducted in an autoclave containing 300 °C pressurized B-Li water for tube-on-plate contact configuration. The worn surfaces were examined with scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and 3D microscopy. The cross-section of wear scar was examined with transmission electron microscope (TEM). The results indicated that the dominant wear mechanism of zirconium alloys in this test condition was delamination and oxidation. The oxide layer on the fretted area consists of outer oxide layer composed of iron oxide and zirconium oxide and inner oxide layer composed of zirconium oxide.

Qingdong Liu hasn't uploaded this paper.

Let Qingdong know you want this paper to be uploaded.

Ask for this paper to be uploaded.