Bifurcation analysis of a parametrically excited inclined cable close to two-to-one internal resonance (original) (raw)
2011, Journal of Sound and Vibration
This paper presents a study of how different vibration modes contribute to the dynamics of an inclined cable that is parametrically excited close to a 2:1 internal resonance. The behaviour of inclined cables is important for design and analysis of cable-stayed bridges. In this work the cable vibrations are modelled by a four-mode model. This type of model has been used previously to study the onset of cable sway motion caused by internal resonances which occur due to the nonlinear modal coupling terms. A bifurcation study is carried out with numerical continuation techniques applied to the scaled and averaged modal equations. As part of this analysis, the amplitudes of the cable vibration response to support inputs is computed. These theoretical results are compared with experimental measurements taken from a 5.4 m long inclined cable with a vertical support input at the lower end. In general this comparison shows a very high level of agreement.
Related papers
On Determining Instability Conditions for Stay Cables Subjected to Parametric Resonance
Parametric Resonance Vibration in cables of cable-stayed bridges is mainly studied when the excitation frequency is close to or twice the cable natural frequency. It is, however, important to consider other cases for this frequency relationship, since among other factors, cable-parametric resonance vibrations are strongly depending on the displacement amplitude at the cable supports. Consequently, the present research work is focused on determining, by experimental and numerical analysis, the instability conditions for stay cables subjected to parametric resonance within a wide range of frequency ratios. This is accomplished, by finding the minimum displacement required at the cable supports in order to induce non-linear vibration of considerable amplitude at the cable. Once the cable characteristics (geometry, material properties, inherent damping and initial tensile preload) are known, the instability conditions are identified and expressed in a simplified and practical way in a d...
Loading Preview
Sorry, preview is currently unavailable. You can download the paper by clicking the button above.