Spectroelectrochemical Characterization Of Anti-Schistosoma-Gold Nanoparticle Conjugate For Use In Immunoassays (original) (raw)
Related papers
Various methods of gold nanoparticles (GNPs) conjugation to antibodies
The unique properties of gold nanoparticles, their rich surface chemistry, and low toxicity as well as easy methods of synthesis have promoted conjugation of the particles with numerous biomolecules for site-specific delivery. Gold nanoparticles have multiple applications including photoablation, diagnostic imaging, radiosensitization, vaccine development, antioxidant, and multifunctional drug-delivery vehicles. These applications require an increasingly complex level of surface decoration in order to achieve efficacy, and limit off-target toxicity. This review will discuss the chemical and physical approaches commonly utilized in relation to surface decoration and the powerful system used to indicate success of the conjugation. Finally, we review the range of recent studies about covalent and noncovalent modes for conjugation of antibodies to the particle surface that aim to advance gold nanoparticle treatments and diagnostics toward the clinic.
Comparative study of label-free electrochemical immunoassay on various gold nanostructures
Journal of Applied Physics, 2013
Electrochemical methods such as amperometry and impedance spectroscopy provide the feasibility of label-free immunoassay. However, the performance of electrochemical interfaces varies with the shape of gold nanostructures. In the present work three types of gold nanostructures including pyramid, spherical, and rod-like nanostructures were electrochemically synthesized on the gold electrode and were further transformed into immunosensor by covalent binding of antibodies. As a model protein, a cancer biomarker, Carcinoembryonic Antigen (CEA) was detected using amperometric and impedimetric techniques on three nanostructured electrodes, which enabled to evaluate and compare the immunoassay's performance. It was found that all three immunosensors showed improved linear electrochemical response to the concentration of CEA compared to bare Au electrode. Among all the spherical gold nanostructure based immunosensors displayed superior performance. Under optimal condition, the immunosensors exhibited a limit of detection of 4.1 pg ml À1 over a concentration range of five orders of magnitude. This paper emphasizes that fine control over the geometry of nanostructures is essentially important for high-performance electrochemical immunoassay. V
Tools to compare antibody gold nanoparticle conjugates for a small molecule immunoassay
Microchimica Acta
Antibody gold nanoparticle conjugates as recognition elements are essential for the overall performance of lateral flow assays. When immobilizing antibodies on gold nanoparticles, the challenge is to prevent aggregation and to ensure that the antibodies are correctly oriented so that they remain functional and their paratopes remain accessible. There are many methods available, and it is difficult to decide which one to use. To help selecting the most appropriate conjugate production method, different synthetic routes of binding antibodies to gold nanoparticles are systematically investigated for the purpose of a quantitative lateral flow test for small molecules. The direct comparison of different conjugate syntheses shows how to select a suitable conjugate for a lateral flow assay. The syntheses examined are direct adsorption of antibody, direct adsorption of reduced antibody, covalent binding to polyethylene glycol linker, and binding via biotin-streptavidin interaction. The conj...
Double-Codified Gold Nanolabels for Enhanced Immunoanalysis
Analytical Chemistry, 2007
A novel double-codified nanolabel (DC-AuNP) based on gold nanoparticle (AuNP) modified with anti-human IgG peroxidase (HRP)-conjugated antibody is reported. It represents a simple assay that allows enhanced spectrophotometric and electrochemical detection of antigen human IgG as a model protein. The method takes advantage of two properties of the DC-AuNP label: first, the HRP label activity toward the OPD chromogen that can be related to the analyte concentration and measured spectrophotometrically; second, the intrinsic electrochemical properties of the gold nanoparticle labels that being proportional to the protein concentration can be directly quantified by stripping voltammetry. Beside these two main direct determinations of human IgG, a secondary indirect detection was also applicable to this system, exploiting the high molar absorptivity of gold colloids, by which, the color intensity of their solution was proportional to the concentration of the antigen used in the assay. Paramagnetic beads were used as supporting material to immobilize the sandwich-type immunocomplexes resulting in incubation and washing times shorter than those typically needed in classical ELISA tests by means of a rapid magnetic separation of the unbound components. A built-in magnet graphite-epoxy-composite electrode allowed a sensibly enhanced adsorption and electrochemical quantification of the specifically captured AuNPs. The used DC-AuNP label showed an excellent specificity/ selectivity, as a matter of fact using a different antigen (goat IgG) a minimal nonspecific electrochemical or spectrophotometric signal was measured. The detection limits for this novel double-codified nanoparticle-based assay were 52 and 260 pg of human IgG/mL for the spectrophotometric (HRP-based) and electrochemical (AuNP-based) detections, respectively, much lower than those typically achieved by ELISA tests. The developed label and method is versatile, offers enhanced perfor-mances, and can be easily extended to other protein detection schemes as well as in DNA analysis.
Development of an Aggregation-Based Immunoassay for Anti-Protein A Using Gold Nanoparticles
Analytical Chemistry, 2002
A unique, sensitive, and highly specific immunoassay system for antibodies using gold nanoparticles has been developed. The assay is based on the aggregation of gold nanoparticles that are coated with protein antigens in the presence of their corresponding antibodies. The aggregation of the gold nanoparticles results in an absorption change at 620 nm that is monitored using an absorption plate reader. To demonstrate the analytical capabilities of the new technique, monodispersed protein A-coated gold particles, averaging 10 nm in diameter, were used to determine the level of anti-protein A in serum samples. The effects of the pH, the temperature, and the concentration of protein A-coated gold nanoparticles on the sensitivity of the assay were investigated using transmission electron microscopy (TEM) and UV/vis absorption spectroscopy. A dynamic range of 2 orders of magnitude and a limit of detection of 1 µg/mL of anti-protein A were observed. The new technique could be used for fast, highthroughput screening of antibodies in clinical diagnostic applications.
Characterization and Optimization of Gold Nanoparticle-Based Silver-Enhanced Immunoassays
Analytical Chemistry, 2007
Silver-enhanced nanoparticle-labeled immunoassays provide a simple, low-cost, and effective way of detecting antigens in dilute solutions. The physical mechanisms behind their operation, however, have not been fully investigated. We present a semiquantitative approach for optimizing sandwich nanoparticle immunoassays using an adsorption-controlled kinetic model. Primary antibodies were immobilized on a solid substrate to bind the target antigens in solution. An optical signal was measured by secondary labeling of antigens with gold nanoparticles and their enhancement by silver nucleation. The opacity of the silver-enhanced spots was quantified by densitometry. The selectivity of the sandwich immunoassays was adequately high, and antigen concentrations as low as 0.1 µg cm-3 (4 ng total) were detected reproducibly. The role of mass transfer was investigated, and a model was developed to optimize the performance of immunoassays by correlating the opacities of silver spots to the concentration and incubation times of antigens and gold nanoparticles. The results could allow the development of more rapid and reliable nanoparticle immunoassays.
IEEE Sensors Journal, 2019
An electrochemical immunosensing platform capable of detecting Immunoglobulin G (IgG) concentration as low as femtograms was developed based on signal amplification strategy. The immunosensing platform was fabricated using selfassembled monolayers (SAM) of 11-mercaptoundecanoic acid (MUDA) on a gold disc electrode. The covalent immobilization of antibody was achieved through the bonding of a carboxyl group of MUDA and amino group of antibody using [1-ethyl-3-(3dimethylaminopropyl) carbodiimide] (EDC) and Nhydroxysuccinimide (NHS) chemistry. The formation of SAM and antibody immobilization was analyzed using cyclic voltammetry and electrochemical impedance spectroscopy. The gold nanoparticles conjugated with horseradish peroxidaselabeled secondary antibodies were used as nanolabels, to increase the sensitivity and catalytic efficiency of the immunosensor. The sandwich immunocomplex formed on the electrode surface produced an electrocatalytic response through the reduction of hydrogen peroxide in the presence of thionin. The fabricated immunosensor exhibited two linear ranges that included IgG concentrations of 10 fg mL-1 to 0.1 ng mL-1 and 0.1 to 100 ng mL-1 respectively.
Use of gold nanoshells in solid-phase immunoassay
Nanotechnologies in Russia, 2008
This paper reports on the results of experimental studies on the use of gold nanoshells and gold nanospheres as biospecific labels in a solid-phase dot assay. A theoretical model providing for a satisfactory explanation of the experimental results is developed for the first time. The techniques for synthesizing gold nanoshells on silica nanospheres and functionalizing gold nanoshells with biospecific macromolecules are described. The samples are characterized using electron and atomic-force microscopy, optical spectroscopy, and dynamic light scattering. Three types of gold nanoshells with silica core diameters of 100, 140, and 180 nm and a gold shell thickness of approximately 15 nm are investigated in our experiments. A normal rabbit serum (target molecules, rabbit IgG) and sheep anti-rabbit immunoglobulins (probing molecules) are used as a biospecific pair model. In the case of a standard protocol of the dot assay on a nitrocellulose membrane with 15-nm colloidal gold nanoparticles used as labels, the minimum detectable amount of rabbit IgG is approximately 15 ng. The replacement of colloidal gold conjugates by gold nanoshells leads to an increase in the assay sensitivity to 0.2 ng for gold nanoshells of the 180/15-nm type and to 0.4 ng for gold nanoshells of the 100/15-and 140/15-nm types. The dependences of the detection limit, the sensitivity range of the method, the maximum color intensity, and the saturation limit with respect to the deposited analyte on the particle parameters are explained in the framework of the developed theory.