Chemical cross-linking abrogates adjuvant potential of natural polymers (original) (raw)
Related papers
Biology
Chitosan is a polysaccharide commonly used, together with its derivatives, in the preparation of hydrogel formulations, scaffolds and films for tissue engineering applications. Chitosan can be used as such, but it is commonly stabilized by means of chemical crosslinkers. Genipin is one of the crosslinkers that has been considered that is a crystalline powder extracted from the fruit of Gardenia jasminoides and processed to obtain an aglycon compound. Genipin is gaining interest in biological applications because of its natural origin and anti-inflammatory actions. In this paper, the ability of chitosan-based materials crosslinked with genipin to exert anti-inflammation properties in applications such as bone regeneration was studied. Powders obtained from chitosan–genipin scaffolds have been tested in order to mimic the natural degradation processes occurring during biomaterials implantation in vivo. The results from osteoblast-like cells showed that specific combinations of chitosa...
The biocompatible polysaccharide chitosan enhances the oral tolerance to type II collagen
Clinical and Experimental Immunology, 2009
Summary Chitosan is a mucoadhesive polysaccharide that promotes the transmucosal absorption of peptides and proteins. At mucosal sites chitosan exhibits immunomodulatory activities and stimulates the release of regulatory cytokines. Herein we evaluated the effect of the co-administration of chitosan in the tolerance to type II collagen (CII) using an experimental model of arthritis. Rats were fed diluent (acetic acid), 1 mg CII, 1 mg chitosan or 1 mg CII + 1 mg chitosan during 5 days before immunization with CII in Freund's complete adjuvant. Systemic effects were evaluated in draining lymph nodes after antigenic challenge or during the clinical evolution of arthritis. Specific antibodies, proliferation against CII and the production of interferon (IFN)-γ and interleukin-10 were assessed. Clinical signs were observed 13–15 days after primary immunization. The CII : chitosan group presented the lowest incidence and developed moderate arthritis, with reduced levels of immunoglobul...
Journal of The Royal Society Interface, 2011
To evaluate the thermo-responsive poly( N -isopropylacrylamide) (PNiPAAm) polymer as an adjuvant, we synthesized PNiPAAm through free radical polymerization and characterized it both in vitro and in vivo . The polymer when mixed with collagen type II (CII) induced antigen-specific autoimmunity and arthritis. Mice immunized with PNiPAAm–CII developed significant levels of CII-specific IgG response comprising major IgG subclasses. Antigen-specific cellular recall response was also enhanced in these mice, while negligible level of IFN-γ was detected in splenocyte cultures, in vitro . PNiPAAm–CII-immunized arthritic mouse paws showed massive infiltration of immune cells and extensive damage to cartilage and bone. As determined by immunostaining, most of the CII protein retained its native configuration after injecting it with PNiPAAm in naive mice. Physical adsorption of CII and the high-molecular-weight form of moderately hydrophobic PNiPAAm induced a significant anti-CII antibody resp...
Chitosan as an Underrated Polymer in Modern Tissue Engineering
Nanomaterials, 2021
Chitosan is one of the most well-known and characterized materials applied in tissue engineering. Due to its unique chemical, biological and physical properties chitosan is frequently used as the main component in a variety of biomaterials such as membranes, scaffolds, drug carriers, hydrogels and, lastly, as a component of bio-ink dedicated to medical applications. Chitosan’s chemical structure and presence of active chemical groups allow for modification for tailoring material to meet specific requirements according to intended use such as adequate endurance, mechanical properties or biodegradability time. Chitosan can be blended with natural (gelatin, hyaluronic acid, collagen, silk, alginate, agarose, starch, cellulose, carbon nanotubes, natural rubber latex, κ-carrageenan) and synthetic (PVA, PEO, PVP, PNIPPAm PCL, PLA, PLLA, PAA) polymers as well as with other promising materials such as aloe vera, silica, MMt and many more. Chitosan has several derivates: carboxymethylated, a...
Effect of Chitosan Properties on Immunoreactivity
Marine Drugs, 2016
Chitosan is a widely investigated biopolymer in drug and gene delivery, tissue engineering and vaccine development. However, the immune response to chitosan is not clearly understood due to contradicting results in literature regarding its immunoreactivity. Thus, in this study, we analyzed effects of various biochemical properties, namely degree of deacetylation (DDA), viscosity/polymer length and endotoxin levels, on immune responses by antigen presenting cells (APCs). Chitosan solutions from various sources were treated with mouse and human APCs (macrophages and/or dendritic cells) and the amount of tumor necrosis factor-α (TNF-α) released by the cells was used as an indicator of immunoreactivity. Our results indicate that only endotoxin content and not DDA or viscosity influenced chitosan-induced immune responses. Our data also indicate that low endotoxin chitosan (<0.01 EU/mg) ranging from 20 to 600 cP and 80% to 97% DDA is essentially inert. This study emphasizes the need for more complete characterization and purification of chitosan in preclinical studies in order for this valuable biomaterial to achieve widespread clinical application.
International Journal of Pharmaceutics, 2007
CD69 is a very early cell activation antigen expressed on the surface of activated immune cells. It can appear within 1-2 h of activation and exhibits maximal expression levels between 18 and 24 h after stimulation. In this work, the expression profile of CD69 in mice splenocytes was evaluated following exposure to the biopolymers, chitosan or alginate and the immunostimulatory factors, CpG ODN 1826 or concanavalin A. We have shown that both polymers are able to upregulate expression of CD69 on B cells and CD4+ T-lymphocytes, with alginate as the least potent stimulus. Moreover, the expression of the CD69 molecule on CD8+ T-lymphocytes was observed only in splenocytes cultured with chitosan. However, activation of lymphocytes did not result in cell proliferation. On the other hand, CpG ODN proved to be a potent B cell stimulator, as evidenced by the upregulation of CD69, but had less effect on T-cells. These results, together with previous discoveries reported in scientific literature, may contribute to the clarification of the adjuvant effect, which has been attributed to chitosan and alginate formulations or to the biopolymers itself.
Biomacromolecules, 2008
Chitosan blends with synthetic biodegradable polymers have been proposed for various biomedical applications due to their versatile mechanical properties and easier processing. However, details regarding the main surface characteristics that may benefit from the blending of these two types of materials are still missing. Hence, this work aims at investigating the surface properties of chitosan-based blends, illustrating the way these properties determine the material-proteins interactions and ultimately the behavior of osteoblast-like cells. The surface characteristics of modified and nonmodified blends were assessed using complimentary techniques such as optical microscopy, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), contact angle measurements and surface energy calculations. The adsorption of human serum albumin (HSA) and human plasma fibronectin (HFN) onto the different surfaces was quantified by association of an indirect method with a colorimetric assay. It was found that the presence of chitosan on the surface promoted the adsorption of proteins. Moreover, a preferential adsorption of albumin over fibronectin was registered. The in vitro biological performance of the studied materials was further investigated by a direct contact assay with an osteoblastic-like cell line (SaOs-2). A synergistic effect of the two components of the blend was observed. While the synthetic polyester promoted the adhesion of SaOs-2, the presence of chitosan significantly enhanced the osteoblastic activity of these cells. This work further confirmed the interest in designing polymeric blends with natural polymers as a successful strategy to enhance the biological performance of a biomaterial.
Journal of Biomedical Materials Research, 2004
The local tissue response of the biomaterial is the most important criteria for determination of its biocompatibility. In the present study, full and semi-interpenetrating polymer networks (IPN) based on polyacrylic acid (AAc) and gelatin (Ge) crosslinked with 0.5 mol % N,NЈ-methylene bisacrylamide (BAm) and 4% glutaraldehyde (GA), respectively, were evaluated for tissue response in rats. IPNs with varying ratios of AAc and Ge were implanted subcutaneously in rats. Gentamicin sulfate (GS)-loaded IPN samples were also studied to evaluate the possible therapeutic use of these polymers. The site of implantation was biopsied and processed for light microscopy (LM) with image analysis for assessment of tissue reaction at 2-, 6-, and 12-week intervals. The tissue reaction was evaluated as a function of composition and time. The degree of neutrophil, lymphocyte and macrophage infiltration, fibrosis, granuloma formation, integration with extracellular matrix, vascular proliferation, and damage of adjacent structures were assessed. Polymers with Ͼ66% crosslinked Ge (Gx) showed persistence of acute inflammatory reaction till 3 months, with marked tissue injury and fibrosis. On the other hand, high crosslinked AAc (Ax) content showed chronic inflammatory reaction with high macrophage infiltration. Macrophages took active part in phagocytosis, degradation, and removal of polymers without granuloma formation or significant giant cell reaction. The IPNs with acrylic acid and gelatin in the ratio of 1:1 showed least tissue reaction and thus appeared to be most biocompatible. The majority of the polymers showed integration with extracellular matrix and growth of capillaries in and around the polymer. The heamogram, liver and renal function tests, and histology of vital organs were all normal. GS loading showed no additional local or systemic reaction suggesting the potential usefulness of the hydrogels as carrier for drugs such as GS.
Versatile Use of Chitosan and Hyaluronan in Medicine
Molecules
Chitosan is industrially acquired by the alkaline N-deacetylation of chitin. Chitin belongs to the β-N-acetyl-glucosamine polymers, providing structure, contrary to α-polymers, which provide food and energy. Another β-polymer providing structure is hyaluronan. A lot of studies have been performed on chitosan to explore its industrial use. Since chitosan is biodegradable, non-toxic, bacteriostatic, and fungistatic, it has numerous applications in medicine. Hyaluronan, one of the major structural components of the extracellular matrix in vertebrate tissues, is broadly exploited in medicine as well. This review summarizes the main areas where these two biopolymers have an impact. The reviewed areas mostly cover most medical applications, along with non-medical applications, such as cosmetics.