Properties of 12% reinforced Aluminium Based Metal Matrix Composites (original) (raw)
Related papers
A Survey of Aluminium Metal Matrix Composites Using Powder Metallurgy Technique
Aluminium metal matrix composites have gained importance in various industries because of their good mechanical properties. Aluminium metal matrix composites are preferred in the fields of aerospace, military, automotive, marine and in other domestic applications. The different reinforcements with aluminium metal matrix composites by powder metallurgy technique results in improved mechanical properties such as ultimate tensile strength, compressive strength, hardness, wear rate. Powder metallurgy is an ideal method of fabrication for MMCs because of the ability to produce near net shapes and little material waste associated with this process. In this survey an attempt has been made to consolidate some of the aspects of mechanical properties of Aluminium MMCs fabricated using Powder Metallurgy Technique.
The effect of process parameters in Aluminum Metal Matrix Composites with Powder Metallurgy
Manufacturing Review
Metal Matrix Composites are developed in recent years as an alternative over conventional engineering materials due to their improved properties. Among all, Aluminium Matrix Composites (AMCs) are increasing their demand due to low density, high strength-to-weight ratio, high toughness, corrosion resistance, higher stiffness, improved wear resistance, increased creep resistance, low co-efficient of thermal expansion, improved high temperature properties. Major applications of these materials have been in aerospace, automobile, military. There are different processing techniques for the fabrication of AMCs. Powder metallurgy is a one of the most promising and versatile routes for fabrication of particle reinforced AMCs as compared to other manufacturing methods. This method ensures the good wettability between matrix and reinforcement, homogeneous microstructure of the fabricated MMC, and prevents the formation of any undesirable phases. This article addresses mainly on the effect of ...
Journal of Modern Manufacturing Systems and Technology
Material world requires a strong research to produce a new class of materials having light weight, higher strength and better performances. This has been leads to investigate for high strength light weight alloy. The main objective in developing aluminium metal matrix composites is to provide enhanced characteristic performances and properties above the currently available materials. Based upon the literature a new type of aluminium composite has been tries to develop which will offer attractive mechanical properties such as high strength, easy machinability, appreciable density, and low manufacturing cost etc. Aluminum powders of 99.55% purity and 325 mesh sizes are mixed with alloying metals like Copper, Magnesium, Silicon and Silicon Carbide powders in a precisely controlled quantity. During the process of powder metallurgy (P/M) product preparation, it was minutely observed to attain the maximum efficiency and accuracy. Aluminium (Al) is a light weight material but doesn’t poss...
A Comprehensive Study of Aluminum Based Metal Matrix Composites: Challenges and Opportunities
Materials Today: Proceedings, 2018
MMCs are prepared by dispersing a reinforcing material into a metal matrix. Composites are prepared by stir casting, powder metallurgy, squeeze casting, spray deposition etc. MMC offer improved mechanical and tribological properties over conventional metals and currently are considered as potential material for light weight application. Due to high strength to weight ratio, high tensile strength, toughness, high wear resistance, these materials are used in automobile, aerospace, sports, and many more fields. Irrespective of these advantages there are some technological barriers in development of composites. Some of them are obtaining uniform distribution of reinforcement among matrix, high processing cost with methods other than casting, availability of low cost reinforcement and machining of composites after preparation if required. Currently SiC, TiB 2 , Al 2 O 3 , B 4 C are used as reinforcement with Al alloys. Some research carried out on hybrid composite with fly ash, lignite ash, coconut husk has also given better results than single reinforcement. This paper reviews current development in Aluminum matrix composite preparation, processing methods, mechanical properties and some challenges in development of composites.
Aluminum alloys are widely used in aerospace and automobile industries due totheir low density and good mechanical properties,bettercorrosionresistanceandwear resistance,lowthermalcoefficientof expansion as comparedto conventionalmetals and alloys. Theexcellent mechanicalpropertiesofthesematerialsandrelativelylowproductioncostmakethema very attractive candidate for a variety of applications both from scientific and technological viewpoints. Inthispaperanattempt hasbeenmadetoprovide a literaturereviewon theoverallperformanceofreinforcedcompositesfabricatedbystircasting method and effect of process parameters on properties of Aluminium based MMC.Theliteraturereviewframework inthispaper providesa clearoverviewthat the process parameters play important role for optimum properties of Aluminium based Metal Matrix Composites.
Material characterisation and mechanical properties of Al2O3-Al metal matrix composites
Journal of materials science, 2001
The mechanical properties of metal matrix composites (MMCs) are critical to their potential application as structural materials. A systematic examination of the effect of particulate volume fraction on the mechanical properties of an Al 2 O 3 -Al MMC has been undertaken. The material used was a powder metallurgy processed AA 6061 matrix alloy reinforced with MICRAL-20 TM , a polycrystalline microsphere reinforcement consisting of a mixture of alumina and mullite. The volume fraction of the reinforcement was varied systematically from 5 to 30% in 5% intervals. The powder metallurgy composites were extruded then heat treated to the T6 condition. Extruded liquid metallurgy processed AA 6061 was used to establish the properties of the unreinforced material. C 2001 Kluwer Academic Publishers
DEVELOPMENT OF ALUMINIUM HYBRID METAL MATRIX COMPOSITE
Aluminium MMCs plays vital role in the modern industrial sectors due to their excellent tribological properties. The present study involves the development of Aluminium metal matrix composite reinforced with particulate Sic and Al2O3 by stir casting method. Weight fraction of 7.5% of Sic, 7.5% of Al2O3 is reinforced with base Aluminium Alloy matrix. The fabricated aluminium alloy was solution treated and then precipitation treated for T-6 condition. Casted composite and heat treated composite machined carefully to prepare specimens for micro hardness, tensile strength and micro structure as per the ASTM standards. Mechanical properties include micro hardness; microstructure and tensile properties were evaluated for the composite before and after heat treatment. Micro hardness and tensile strength was improved by 34% and 7% by heat treatment. The micro graphs of hybrid composite studied and revealed the uniform distribution of reinforcements in the matrix. Further significant improvement in micro structure observed in heat treated hybrid composite.
Properties of ceramic-reinforced aluminium matrix composites - a review
International Journal of Mechanical and Materials Engineering, 2014
A review of various properties of ceramic-reinforced aluminium matrix composites is presented in this paper. The properties discussed include microstructural, optical, physical and mechanical behaviour of ceramic-reinforced aluminium matrix composites and effects of reinforcement fraction, particle size, heat treatment and extrusion process on these properties. The results obtained by many researchers indicated the uniform distribution of reinforced particles with localized agglomeration at some places, when the metal matrix composite was processed through stir casting method. The density, hardness, compressive strength and toughness increased with increasing reinforcement fraction; however, these properties may reduce in the presence of porosity in the composite material. The particle size of reinforcements affected the hardness adversely. Tensile strength and flexural strength were observed to be increased up to a certain reinforcement fraction in the composites, beyond which thes...
Perspectives in Science, 2016
The applications of metal matrix composites are increasing day by day due to high strength to weight ratio. In the present work Al-SiC-B 4 C metal matrix composite is prepared from sintering of mechanically alloyed powder (ball milling) in powder metallurgy processes. Three different combinations of compositions in volume fraction were chosen namely 90%Al 8%SiC 2%B 4 C, 90%Al 5%SiC 5%B 4 C and 90%Al 3%SiC 7%B 4 C. An attempt has been made to study the characteristics of developed metal matrix composite. As increase in percentage of B 4 C the micro hardness of the metal matrix composite has increased significantly. The microstructure of the prepared metal matrix composite reveals the uniform distribution of particles in metal matrix.