Material phenomena controlling rapid processing of thermoplastic composites (original) (raw)
Related papers
Advanced Thermoplastic Composite Manufacturing by In-Situ Consolidation: A Review
Journal of Composites Science, 2020
This article provides an overview of the evolution of the in-situ consolidation (ISC) process over time. This evolution is intimately linked with the advancements in each of the steps of the ISC manufacturing process, is additive in nature, and is limited by the orthotropic nature of composite materials and the physicochemical behavior of the thermoplastic matrix. This review covers four key topics: (a) Thermal models—simulation tools are critical to understand a process with such large spatial gradients and fast changes. Heating systems once marked a turning point in the development of industrial ISC systems. Today, lasers are the most recent trend, and there are three key issues being studied: The absorption of energy of light by the material, the laser profile, and the laser focusing. Several approaches have been proposed for the distributed temperature measurements, given the strong temperature gradients. (b) Adhesion—this refers to two subsequent mechanisms. In the first place,...
Interfacial Engineering Methods in Thermoplastic Composites: An Overview
Polymers
The paper critically analyzed different interfacial enhancing methods used in thermoplastic composites. Although the absence of cross-linked polymer chains and chemical bonds on solidification enables the thermoplastics to be remelted, it creates weak interfacial adhesion between fibre reinforcements and the thermoplastic matrix. The weak fibre-matrix interface bonding reduces the efficiency with which the applied load can be transferred between these composite constituents, causing the composite to fail prematurely. Their need for high-temperature processing, poor compatibility with other polymer matrices, and relatively high viscosity render thermoplastics challenging when used to manufacture composite laminates. Therefore, various methods, including nanoparticles, changing the polarity of the fibre surface by plasma etching, chemical treatment with ozone, or an oxidative attack at the fibre surface, have been applied to improve the fibre/matrix bonding in thermoplastic composites...
Journal of Materials Processing Technology, 2009
A fundamental characteristic of composite materials is that the initial choice of fiber and matrix type together with the selected manufacturing process controls the properties of the final part. As the manufacturing process creates simultaneously the composite and the component, its influence on part quality must be considered. From a manufacturing point of view, considering equipment, energy costs and production rate, it is desirable to process the part at the lowest possible pressures and temperatures and with the shortest cycle times. The challenge consists of making the production process robust for economical manufacture by an improved understanding of the material/process/property relationships. This paper focuses on the computational and experimental analysis of fusion bonding in thermoplastic composites. The influence of the process parameters on the bond strength is investigated. The bond quality exhibits randomness, which may be problematic within an industrial context. Its origin has been explained through a simple probabilistic analysis. The process sequence is found to be a major source of this uncertainty, resulting in various thermal loading and bonding quality fluctuations. On this basis, three practical ways for quality improvement are proposed.
New Advances in Thermoplastic Commingled Composites: Processing and Molecular Dynamics
Fundamental Concepts and Models for the Direct Problem
This chapter addresses a current and innovative topic related to thermoplastic commingled composites. Computational molecular dynamics simulations represent a very sophisticated technique for characterizing microstructures, but it is still not widely explored in the area of high-performance thermoplastic polymers. The molecular dynamics technique evaluates the movements of atoms as a function of time and temperature, according to external demands and boundary conditions of the molecular system. Based on thermodynamics, atomistic and classical mechanics theories, molecular dynamics simulations with empirical potentials aim at (i) the development of new polymeric materials, (ii) the optimization of polymer properties, and (iii) the characterization of these materials. The molecular dynamics technique provides a prediction of mechanical and thermal behavior of high-performance polymeric microstructures, reducing the number of tests and experimental practices, which increases the operational cost of engineering projects and the characterization of structural composite materials. Furthermore, this chapter also includes a scientific and technological literature background to demonstrate and highlight the conjuncture between thermal processing parameters, thermal degradation kinetics, processing optimization, thermal and mechanical characterization techniques. It also includes literature and experimental background based on previous studies.
An Analysis of Mechanisms Governing Fusion Bonding of Thermoplastic Composites
Journal of Thermoplastic Composite Materials, 1998
A number of mechanisms have been proposed in the literature as contributors to the strength development at the polymer-polymer interface during fusion bonding of thermoplastic composites. Of these, healing and intimate contact emerge as fundamental mechanisms governing bonding. Intimate contact refers to the development of the amount of surface area that is physically contacted at the interface at any time, and healing describes the migration of polymer chains across the interface in intimate contact. This work provides a new theoretical development of a coupled bonding model that accounts for variability in initiation time for healing due to growth in the area in intimate contact. The generalized coupled bonding model is valid for any set of processing conditions and reduces to the proper controlling mechanism as dictated by the process. Analysis revealed a key dimensionless group, Q, that captures the coupled nature of the mechanisms governing fusion bonding. By evaluating Q, whic...
Processing of short fibre/thermosetting matrix composites
Composites Part A: Applied Science and Manufacturing, 1996
The fundamental aspects of the processing of thermosetting matrix composites with short fibres in compression moulding technologies are presented. The reaction kinetics and the rheology of compounds based on unsaturated polyester matrices have been characterized as a function of different processing variables (temperature and shear rate). The effects of the filler (calcium carbonate) and the reinforcement (glass fibres) on the curing kinetics of unsaturated polyester resins were studied by differential scanning calorimetry (d.s.c.), and the rheological properties of the compounds were analysed using parallel-plate rheometry. The results of the d.s.c. characterization were used to develop an empirical kinetic model accounting for diffusion control effects, while d.s.c. and rheological measurements were combined to obtain correlations between viscosity, extent of reaction, temperature and shear rate. The complete chemorheological model was verified through rheological tests performed at different heating rates and angular frequencies. The model developed in this work has been integrated into a general processing model for the description of the moulding behaviour of thermosetting matrix compounds for automotive applications. Excellent agreement between model predictions and experimental results has been obtained.
Thermal and morphological skin-core effects in processing of thermoplastic composites
Composites, 1990
During thermostamping, the processing method where preconsolidated laminates are preheated in an oven and then transferred to a 'cold' mould for forming and solidification, the transfer from the oven to the mould as well as the initial cooling upon contact with the mould surface may cause high and/or unbalanced cooling on the two sides of a part. These conditions generate internal stresses as well as corresponding morphological features. This work focused on analysing the morphology through the thickness of a part using our process simulated laminate (PSL) technique, which allows evaluation of a laminate through its thickness in relation to the processing conditions employed. Specifically, the degree of crystallinity and storage shear moduli were examined as a function of thickness for balanced and unbalanced cooled PEEK/AS-4 process simulated laminates. The resulting curvature for the unbalanced cooled laminates was measured in order to estimate the process-induced stress level. A methodology is in place to assess the importance of these phenomena for a variety of manufacturing processes. Thus, this study reveals through both differential scanning calorimetry and dynamic mechanical analysis that pronounced thermal and morphological 'skin-core' phenomena may be induced in thermoplastic composite laminates by high production rate processing techniques.
Journal of Composites Science
The process of curing of large thick composite parts needs attention regarding the formation of residual stresses. Similarly, novel reactive thermoplastics need investigating to produce an efficient thermal cure profile that decreases the risk of warpage and residual stress. In this work, the polymerization kinetics of the Elium resin system is investigated by differential scanning calorimetry (DSC) tests, the analysis of thermo-grams, and the parameters of Kamal and Sourour’s semi-empirical model. A numerical model based on finite elements was set up to reproduce the temperature fields during part consolidation. Several processing conditions were investigated (dwell temperature, environment, heat exchange) in order to predict the thermal gradient within the part. The optimal cure profile was identified as a function of process parameters with the aim of minimizing the thermal gradient within the composite element. The analysis revealed that, for the reactive thermoplastic Elium, th...