Hazard and Risk in Mining Industry: A Case Study Based on Senghenydd Colliery Disaster (original) (raw)
Related papers
Dust Explosions –A Major Industrial Hazard
Dust explosions are a major hazard in many industrial processes. In operations such as crushing and grinding, conveying, classifying and storage, an explosion may occur in the presence of combustible dusts or powders. A lot of accidental dust explosions take place in industrial plants that have powder-processing equipment. This is because more than 70% of powders processed in industry are combustible. It is essential, therefore, to accumulate much knowledge as possible on the explosion hazards of combustible powders. Some detailed studies were conducted in developed countries .A report of dust explosions in U.S.A. from 1900 – 1956 consists of information details for 75 most serious explosions out of 1125 recorded This covered a wide range of dusts wood, food and feeds, metals, plastics, coal, paper and chemicals. In India, information pertaining dust explosions is almost non- existent solely because in most accidents that occur in India, the broad term ‘Explosion’ is used and record...
Emerging Emergency Due to Dust Explosions in Process Industry
The paper describes, with the help of several representative case studies, how ‘dust’ explosions commonly occur in process industry all over the world and the devastation they cause to life and property. Dust explosions also pose serious risk of environmental contamination. The near-total lack of documentation vis a vis dust explosions in India is highlighted. The paper also describes the materials involved, the initiating factors, and the fatalities typically associated with dust explosions. It makes out a case for generating awareness towards the dust explosion hazard in India.
IAEME, 2019
This paper, basing on analytical review of the disasters and incidents related to explosions of dust/methane/air mixtures in mine working space, assumes that it is possible to improve the current explosion protection system of coal mines. The activities of the dust control mode, aimed at preventing formation of coal aerosols and their mixtures with methane, have been analyzed. The advantages and disadvantages of the current explosion protection systems have been considered from a critical point of view, and particular attention has been paid to application of inert (shale) dust for the purposes of explosion suppression. The experimental part of the paper contains the results of studying the effects of different concentrations of inert dust on the hazardous explosion factors of dust/methane/air mixtures. Above all, these factors are excessive explosion pressure and pressure rise rate at explosion. These parameters were determined via the methodology developed by the author, in a 20-litre sphere (explosion chamber). As a sample of coal dust, coal of D grade (long-flame) dispersed up to 63-94 micrometer fraction, was used. On the basis of the obtained results, an assumption was made that it is expedient and feasible to reduce the concentration of inert dust via adding to the inert dust composition of the inhibitors of the coal dust detonation combustion processes.
Thermal power is the main source of electricity in Taiwan, where coal is the primary fuel. However, concerns for potential fire and explosion hazards caused by coal dust are increasing. The problem regarding the storage or transportation process of coal cannot be neglected. This study explored four coal dust samples obtained from the three regions of South Africa, Russia, and Australia; the particle size D 50 of all the samples was < 75 μm. The intrinsic safety characteristics of combustion and explosion in coal dust were studied using the minimum ignition energy (MIE) test, minimum ignition temperature (MIT) of cloud apparatus, and 20-L apparatus. Russian coal exhibited the lowest MIE and MIT values of 550 °C and 120 mJ, respectively. Furthermore, the minimum dust explosion concentration was 30 g m −3 in Australian coal. These experimental results, combined with the on-site investigation, indicated that appropriate countermeasures are sufficient to reduce dust hazards. The results showed that the dust explosion risk of a properly operating thermal power plant is considerably low.
Occupational Exposure to Dust in Open Pit Mining. A Short Review
2012
A literature review concerning the scientific knowledge of all the key factors related to respirable crystalline silica dust exposure was conducted and a chronological evolution of the state-of-the-art knowledge that can respond to questions raised by the development of the work done in quarries and opencast mines is presented, based on bibliographic research. Findings assert that exposure to silica dust is the most frequent and dangerous hazard in open pit mining. Some aspects meet consensus amid authors: tasks and work equipment, areas surrounding the quarry, methods of sampling, relationship between the amount collected and the legal limits set (TLV) in each country. "Good practice" preventive strategies towards the protection of the exposed workers comprehend early knowledgeable recognition of the danger followed by application of technical means of exposure control. A review evidence concerns the link between exposure, by inhalation of dust containing crystalline silica, and its harmful effect to human health, often deadly (silicosis). Authors noted that other work-related factors associated to exposure to silica dust may potentiate other occupational diseases. Silicosis is a preventable occupational disease, but not curable, accounting for new cases of death even among young workers. Thus an effective mandatory control of exposure to crystalline silica in the workplace is therefore crucial.
Dust Explosion Hazard – A Review
International Journal of Mining Science, 2021
Dust explosion, one of the most serious and widespread explosion hazards, which is recently a topic of concern for the developed countries are not even identified as a serious threat in developing countries. In this paper we present a review on the concept of dust explosion, by critically reviewing the work done in this domain, a brief on the equipment used for studying this field, followed by possible directions this research could be furthered in
Risk Assessment of Respirable Dust Exposure to Workers in the Mineral Ore Processing Industry
The Indonesian Journal of Occupational Safety and Health, 2024
Introduction: The mineral ore processing industry is a sector that can generate pollutants in the form of dust during the production, commonly known as respirable dust. This dust can enter the upper respiratory tract and lungs, thereby causing health problems to employees working in the mineral ore processing industry. This study aims to investigate health risks associated with exposure to dust in the mineral ore processing industry. Methods: Environmental Health Risk Analysis (EHRA) was used to assess dust exposure over the previous three years, following the NIOSH Manual of Analytical Methods (NMAM) 0600 for dust sampling measurement. Results: Seven locations with high dust emissions were considered for this study. The results of the respirable dust sampling showed that the concentrations in the previous three years ranged from 1,823 to 6,109 mg/m3, followed by a decrease in the following year to 0.049 to 2,715 mg/m3. Meanwhile, in the final year, the concentration of respirable dust ranged from 0.094 to 1.341 mg/m3. The calculated risk quotient (RQ) value for the previous three years remained below 1, indicating safety. Conclusion: Athough respirable dust was considered safe in the previous year, it is important to constantly control exposure due to continued high levels and the possibility of future increases.
Applications of dust explosion hazard and disaster prevention technology
Powdered materials are widely used in industrial processes, chemical processing, and nanoscience. Because most flammable powders and chemicals are not pure substances, their flammability and self-heating characteristics cannot be accurately identified using safety data sheets. Therefore, site staff can easily underestimate the risks they pose. Flammable dust accidents are frequent and force industrial process managers to pay attention to the characteristics of flammable powders and create inherently safer designs. This study verified that although the flammable powders used by petrochemical plants have been tested, some powders have different minimum ignition energies (MIEs) before and after drying, whereas some of the powders are released of flammable gases. These hazard characteristics are usually neglected, leading to the neglect of preventive parameters for fires and explosions, such as dust particle size specified by NFPA-654, MIE, the minimum ignition temperature of the dust cloud, the minimum ignition temperature of the dust layer, and limiting oxygen concentration. Unless these parameters are fully integrated into process hazard analysis and process safety management, the risks cannot be fully identified, and the reliability of process hazard analysis cannot be improved to facilitate the development of appropriate countermeasures. Preventing the underestimation of process risk severity due to the fire and explosion parameters of unknown flammable dusts and overestimation of existing safety measures is crucial for effective accident prevention.