Ubiquitous Positioning Indoor Navigation and Location Based Service, UPINLBS 2010, Kirkkonummi, Finland, October 14-15, 2010 (original) (raw)
Related papers
L5IN: Overview of an Indoor Navigation Pilot Project
Remote Sensing
While outdoor navigation systems are already represented everywhere, the enclosed space is much less developed. The project Level 5 Indoor Navigation (L5IN) presents a new approach with mobile phone standard 5G as the orientation signal and without additional infrastructure for navigation in indoor environments. The aim of this project is to use the new available 5G technology to show how navigation systems, which have thus far only been available in the outdoor segment, can now be integrated into existing smartphone systems for indoor navigation. This paper gives an overview of the project and presents the different work packages leading to a holistic approach towards the development of an indoor navigation application for pedestrians. By using a specific app with open interfaces, it is planned to make navigation possible in all buildings modeled according to certain standards. The challenge involved is that, unlike outdoor maps, there is no map basis for buildings. For this reason...
Tracker: Indoor Positioning for the LOK8 Project
Spatial awareness is identified as a key feature of today’s mobile devices. While outdoor navigation has been accessible and broadly used for some time already with the help of GPS, indoor positioning has not yet made it into mainstream life. GPS and other GNSS systems offer accuracy of a scale different to that required for efficient indoor navigation. This research aims to investigate how a number of sensors such as a Digital Compass, Bluetooth and Accelerometer may be combined to calculate device position and orientation to perform directional querying in a spatial database. These three technologies were chosen because they appear in some mobile devices available today and are likely to become even more widespread in the nearest future.
IEEE Transactions on Vehicular Technology, 2015
This paper introduces an autonomous integrated indoor navigation system for ground vehicles that fuses inertial sensors, light detection and ranging (LiDAR) sensor, received signal strength (RSS) observations in wireless local area networks (WLAN), odometry, and pre-defined occupancy floor maps. The paper proposes a solution for the problem of automatic self-alignment and position initialization indoors under the absence of absolute navigation system such as Global Navigation Satellite Systems (GNSS). The initial tilt angles (roll and pitch) are estimated by an extended Kalman filter (EKF) that uses two horizontal accelerometers as measurements. The initial position and heading estimation is performed using a sub-image matching algorithm based on normalized cross-correlation between projected 2D LiDAR scans and an occupancy floor map of the environment. The ambiguities in position/heading initialization are resolved using RSS. The proposed position/heading estimation module is also utilized in navigation mode as a source of absolute position/heading updates to EKF for enhanced observability. The state predictor is an enhanced 3D inertial navigation system that utilizes low cost MEMS-based reduced inertial sensors set (RISS) aided by the vehicle odometry. In navigation mode, LiDAR scans are used to estimate the vehicle's relative motions using an inertial-aided iterative closest point (ICP) algorithm. To fuse all available measurements a multi-rate multi-mode EKF design is proposed to correct navigation states and estimate sensors biases. The developed system was tested in real indoor office environment covered by an IEEE 802.11 WLAN on a mobile robot platform equipped with MEMS inertial sensors, WLAN-interface, 2D LiDAR scanner and a quadrature encoder. Results demonstrated the capabilities of the self-alignment and initialization module and showed an average sub-meter level positioning accuracy.
UCGE Reports Map Aided Indoor and Outdoor Navigation Applications
Navigation systems play an important role in many vital disciplines. Determining the location of a user relative to the physical environment (e.g. roadway, intersections, and services) is an important part of transportation services such as in-vehicle navigation, fleet management and infrastructure maintenance. In addition, other navigation services are required for locating the position of a user in an indoor physical environment (e.g. airports, shopping malls, public buildings, university campus). This indoor-based navigation can assist in several applications such as user navigation, enhanced 911 (E911), law enforcement, location-based and marketing services. Both indoor and outdoor navigation applications require a reliable, trustful and continuous navigation solution that overcomes the challenge of Global Navigation Satellite System (GNSS) signal unavailability. To compensate for this issue, GNSS is now commonly used in tandem with other navigation systems such as Inertial Navigation System (INS). This dual-system integration method provides a solution to GNSS signal outages. However, over time there is a significant amount of drift, characteristic of INS but especially common with low-cost commercial sensors. The effects of drift on INS accuracy highlight the need for additional absolute aiding sensors that can survive for longer periods of time.
In-Car Positioning and Navigation Technologies—A Survey
IEEE Transactions on Intelligent Transportation Systems, 2000
In-car positioning and navigation has been a killer application for global positioning services (GPS) receivers, and a variety of electronics for consumers and professionals have been launched on a large scale. Positioning technologies based on stand-alone GPS receivers are vulnerable, and thus have to be supported by additional information sources to obtain desired accuracy, integrity, availability, and continuity of service. A survey of the information sources and information fusion technologies used in current in-car navigation systems is presented. The pros and cons of the four commonly used information sources receivers for radio based positioning using satellites, vehicle motion sensors, vehicle models, and digital map information are described. Common filters to combine the information from the various sources are discussed. The expansion of the number of satellites and the number of satellite systems, with their usage of available radio spectrum is an enabler for further development in combination with the rapid development of microelectromechanical inertial sensors and the refined digital maps.
Indoor/Outdoor Navigation Services Provision Through a Mixed Video/Radio Localization System
Andrea Fabio Cattoni was born in Genoa (Italy) in 1979. He obtained the Laurea degree in Telecommunications Engineering in June 2004, University of Genoa, with a thesis concerning feature reduction algorithms for remotely sensed hyperspectral images. From October 2004 he cooperates with ISIP40 group working on Cognitive Radio techniques and location systems. From January 2005 he is a Ph.D. student in Information and Communication Science and Technology Space Sciences and Engineering, his research topics are: Distributed Cognitive Radio technologies and Advanced Positioning Systems. He is official reviewer of international journals and conferences. He is author and co-author of some papers presented at international conferences, an international journal and a book chapter. Alessandro Calbi was born in Sanremo (Italy) on February, the 10th-1978. He obtained laurea degree in telecommunications engineering in 2005, with dissertation about people tracking in a multicamera video surveillance system. Since 2005, he had a research grant at the ISIP40 labs, Department of Biophysical and Electronic Engineering (DIBE) of the University of Genoa. Currently, he works has developer in TechnoAware S.r.L and his research topic are advanced image processing technique for virtual immervisive communications and object tracking. He is author or coauthor of some papers in international scientific journals. Dr. Lucio Marcenaro received the Ph.D. in Electronics and Informatics Engineering in 2003 from the University of Genova with the doctoral thesis "Objects localization and classification in advanced video-surveillance systems". In 2003 he started the spin-off company TechnoAware srl designing and developing multi-sensor data and image processing intelligent systems for context aware computing. He is author and coauthor in several papers in scientific journals and conferences.