Photogrammetric techniques for characterisation of anisotropic mechanical properties of Ti-6Al-4V (original) (raw)
Characterising the Effects of Strain Rate, Crystallographic Texture and Direction of Loading on the Mechanical Behaviour of Ti-6Al-4V
Matthew R Arthington
Journal of Dynamic Behavior of Materials, 2015
View PDFchevron_right
Strain rate dependence of Ti64: Characterisation of mechanical properties up to failure using novel optical techniques
Matthew R Arthington
2009
View PDFchevron_right
Deformation mechanisms of a commercial titanium alloy Ti6Al4V as a function of strain rate and initial texture
Frederik Coghe
Journal de Physique IV (Proceedings), 2006
View PDFchevron_right
Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy
Mehdi Brahim, baya alili
IOP Conference Series: Materials Science and Engineering, 2015
View PDFchevron_right
The use of hat-shaped specimens to study the high strain rate shear behaviour of Ti–6Al–4V
Frederik Coghe
International Journal of Impact Engineering, 2010
View PDFchevron_right
Quasi-Static Mechanical Behaviour of TI-6AL-4V Alloy at Room Temperature
Victor Vásquez
2013
View PDFchevron_right
Measurement of the Anisotropic Dynamic Elastic Constants of Additive Manufactured and Wrought Ti6Al4V Alloys
Noam Eliaz
Materials, 2022
View PDFchevron_right
Anisotropic deformation behavior under various strain paths in commercially pure titanium Grade 1 and Grade 2 sheets
AKIHIRO KOBUKI
Materials Science and Engineering: A, 2016
View PDFchevron_right
In situ strain profiling of elastoplastic bending in Ti–6Al–4V alloy by synchrotron energy dispersive x-ray diffraction
Dr Vivek Shukla
Journal of Applied Physics, 2009
View PDFchevron_right
Improved materials characterisation through the application of geometry reconstruction to quasi-static and high-strain-rate tension tests
Matthew R Arthington, Nik Petrinic
2012
View PDFchevron_right
Mechanical Behavior of Differently Oriented Electron Beam Melting Ti–6Al–4V Components Using Digital Image Correlation
Cesar Carrasco
Journal of Engineering Materials and Technology, 2018
View PDFchevron_right
Determining true stress–strain curve for isotropic and anisotropic materials with rectangular tensile bars: method and verifications
Oddmund Søvik
Computational Materials Science, 2001
View PDFchevron_right
Strain Analysis of Ti6Al4V Titanium Alloy Samples Using Digital Image Correlation
Karolina Karolewska
Materials, 2020
View PDFchevron_right
Local Deformation Patterns in Ti-6Al-4V under tensile, fatigue and dwell fatigue loading
Angus Wilkinson
International Journal of Fatigue, (2012), vol. 43, 111-119 , 2012
View PDFchevron_right
Comparison of low and high strain rate deformation mechanisms and texture evolution for a textured Ti6Al4V alloy
Luc Rabet, Frederik Coghe
DYMAT 2009 - 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, 2009
View PDFchevron_right
Cross-section reconstruction during uniaxial loading
Matthew R Arthington, Clive Siviour
Measurement Science and Technology, 2009
View PDFchevron_right
Strain Measurement Validation Using 3D Photogrammetry Techniques
Fred Barez
View PDFchevron_right
On the Prediction of Uniaxial Tensile Behavior Beyond the Yield Point of Wrought and Additively Manufactured Ti-6Al-4V
Peter Collins
Integrating Materials and Manufacturing Innovation
View PDFchevron_right
Anisotropic behavior of a Ti–6Al–4V sheet during cold rolling: Evidence of macroscopic shearing
Nicolas Gauquelin
Journal of Materials Processing Technology, 2008
View PDFchevron_right
Deformation Mechanisms of Ti-6Al-4V During Tensile Behavior at Low Strain Rate
Luc Rabet
Journal of Materials Engineering and Performance, 2007
View PDFchevron_right
Texture strengthening and anisotropic hardening of mill annealed Ti-6Al-4V alloy under equi-biaxial tension
Satish Singh
Materials Characterization, 2020
View PDFchevron_right
Ti–6Al–4V: Deformation map and modelisation of tensile behaviour
Luc Rabet
Materials & Design, 2008
View PDFchevron_right
Identification of Mechanical Properties for Titanium Alloy Ti-6Al-4V Produced Using LENS Technology
Jerzy Małachowski
Materials, 2019
View PDFchevron_right
Modelling strain localization in Ti–6Al–4V at high loading rate: a phenomenological approach
Satyam Suwas
Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2019
View PDFchevron_right
Microscopic strain localisation in WAAM Ti-6Al-4V during uniaxial tensile loading
Alistair Ho
MATEC Web of Conferences
View PDFchevron_right
Experimental and finite-element analysis of the anisotropic response of high-purity α-titanium in bending
Oana Cazacu
Acta Materialia, 2010
View PDFchevron_right
Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling
Michael Nixon
International Journal of Plasticity, 2010
View PDFchevron_right
Experimental Correlation of Mechanical Properties of the Ti-6Al-4V Alloy at Different Length Scales
Amna ZNAIDI
Metals
View PDFchevron_right
Mapping OF Surface Strain Development DURING Mechanical Loading OF Aluminium Specimens BY Image Analysis OF Sequential Micrographs
William Clocksin
View PDFchevron_right
Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy
Laurent Duchêne
International Journal of Material Forming, 2011
View PDFchevron_right
Deformations of Ti-6Al-4V additive-manufacturing-induced isotropic and anisotropic columnar structures: Insitu measurements and underlying mechanisms
E-wen HUANG
Additive Manufacturing
View PDFchevron_right
Deformation Monitoring of Materials Under Stress in Laboratory Experiments
D. Skarlatos
ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2016
View PDFchevron_right