Computational Design Synthesis: Embedding Material Behaviour in Generative Computational Processes (original) (raw)
Related papers
Computational Strategies for the Architectural Design of Bending Active Structures
International Journal of Space Structures, 2013
Active bending introduces a new level of integration into the design of architectural structures, and opens up new complexities for the architectural design process. In particular, the introduction of material variation reconfigures the design space. Through the precise specification of their stiffness, it is possible to control and pre-calibrate the bending behaviour of a composite element. This material capacity challenges architecture's existing methods for design, specification and prediction. In this paper, we demonstrate how architects might connect the designed nature of composites with the design of bending-active structures, through computational strategies. We report three built structures that develop architecturally oriented design methods for bending-active systems using composite materials. These projects demonstrate the application and limits of the introduction of advanced engineering simulation into an architectural workflow, and the extension of architecture...
Shape Synthesis in Mechanical Design
2006
The shaping of structural elements in the area of mechanical design is a recurrent problem. The mechanical designer, as a rule, chooses what is believed to be the “simplest” shapes, such as the geometric primitives: lines, circles and, occasionally, conics. The use of higher-order curves is usually not even considered, not to speak of other curves than polynomials. However, the simplest geometric shapes are not necessarily the most suitable when the designed element must withstand loads that can lead to failure-prone stress concentrations. Indeed, as mechanical designers have known for a while, stress concentrations occur, first and foremost, by virtue of either dramatic changes in curvature or extremely high values thereof. As an alternative, we propose here the use of smooth curves that can be simply generated using standard concepts such as non-parametric cubic splines. These curves can be readily used to produce either extruded surfaces or surfaces of revolution.
2006
In contemporary architecture and structural engineering a trend towards the increased use of advanced geometry and computation can be observed. This poses new challenges for the structural engineer, the designed structures and structural types, and the technology used to design, describe, model, calculate, engineer, communicate, produce and assemble these structures. System concepts, like parametric associative design, can be used to capture the design intelligence in parameters, associations, rules, objects (features) and programmatic components . Although these technologies have many features for the modelling the geometrical representation of a structure, buildings consist of more than only geometry and generation. For free-form structures, surfaces should be meshed, tessellated or populated to impose a grid-based structure consisting of these parametric elements. However, not all restrictions of the structural design can be expressed in a single surface model of the intended design, since often the structure imposes restrictions in the form of angles, lengths, stresses, etc. Therefore, surface population is often not the appropriate technique for defining a structure. This paper presents a computational method to model a geometrical and structural representation with embedded design intelligence in the form of simple rules, constraints and the generation process. With the presented method a designed shape can be automatically approximated in order to allow the architect and the engineer to quickly apply and test a typical structure (for instance a space frame or a beam-column-structure) on the designed shape in the early phases of the design, while taking into account restrictions from various aspects, such as the load bearing behaviour, production aspects, etc. Proper structural design and fine-tuning of the design still has to take place by the designers, but this tool allows quick tests and indicative exploration during the first conversations of the design. A prototype implementation has been created in a new parametric associative system, GenerativeComponents [1], by programming components in the C# programming language.
Programmable Bending - grain-informed simulation and design
eCAADe proceedings, 2018
The project investigates the potential of programmable bending-a strategy, which informs bending simulations of multilayered veneer elements with the data of its anisotropic grain structure. Project further examines the possibilities of using these irregular material characteristics as a design driver. The project questions the possibility of informing the design with the particular characteristics of the material structure and of creating complex geometries from non-customized or minimally customizes mass-produced elements. Project develops a workflow, in which a two-dimensional scan of the material is transformed into a vector field and consequently into a mesh with variable stiffness characteristics. The stiffness of each edge within a mesh was calculated basing on an angle between this edge and the relevant vector within a vector-field. That resulted in realistic simulation, which differentiated bending characteristics along the grain and perpendicular to the grain. Uneven connection of several layers of active-bended veneer allows to accumulate local stresses and pre-program bending characteristics of the structure. As a result active-bended structure forms particular predefined and predesigned shape and possesses locally variable stiffness and flexibility. The project applies this strategy to the design of the pavilion located within the urban context of a public space.
Analogue and digital form-finding of bending rod structures
This paper presents a research on real-time shape exploration employing analogue and digital form-finding of bending structures, which concluded with the testing of the proposed design process during an intensive student workshop at Graz University of Technology. The aim was to experiment with analogue and digital tools in parallel, informing design decisions. The experiments involved physical form-finding following the tradition of Frei Otto at the Institute of Lightweight Structures in Stuttgart as well as computational form-finding simulating bending behavior with the use of dynamic relaxation of spring-particle systems (Kangaroo plugin for Rhino). By establishing feedback between digital media and physical prototypes, the creative process was informed by the material characteristics and structural properties; the aim was to utilize a parametric model not merely as a representational tool, but as a tool for real-time shape exploration that embeds the physical behavior and interaction among bending rods. While traditional architecture and engineering aims at the structural optimization of an existing form, a dynamic form-finding system can lead to a real-time discovery of structural form encouraging the morphogenesis of optimized structures.
Form-Function Synthesis in Engineering Design
1992
In this paper, we present an overview of research on form/function synthesis for physical artifacts. This paper summarizes a lengthier technical report that characterizes the computational models underlying selected Engineering Design Research Center (EDRC) projects (Flemming et al., 1992a). This paper reviews how this problem is perceived in selected engineering disciplines, including architectural design, and classifies these models by their strategies and attempts to link these strategies to appropriate types of design problems 1 .
Structural Optimization for Materially Informed Design to Robotic Production Processes
American Journal of Engineering and Applied Sciences, 2015
Hyperbody's materially informed Design-to-Robotic-Production (D2RP) processes for additive and subtractive manufacturing aim to achieve performative porosity in architecture at various scales. An extended series of D2RP experiments aiming to produce prototypes at 1:1 scale wherein design materiality has been approached from both digital and physical perspectives were recently implemented. At digital materiality level, a customized computational design framework for compression only structures has been developed, which was directly linked to the robotic production setup. This has enabled the systematic study of physical materiality, which cannot be fully simulated in the digital medium. The established feedback loop ensured not only the development of an understanding for material properties in relation to their simulated and real behaviours but also allowed to robotically additively deposit and/or subtractively remove material in order to create informed material architectures at 1:1 scale.
Shaping hybrids – Form finding of new material systems
International Journal of Architectural Computing, 2018
Form-finding processes are an integral part of structural design. Because of their limitations, the classic approaches to finding a form – such as hanging models and the soap-film analogy – play only a minor role. The various possibilities of digital experimentation in the context of structural optimisation create new options for the designer generating forms, while enabling control over a wide variety of parameters. A complete mapping of the mechanical properties of a structure in a continuum mechanics model is possible but so are simplified modelling strategies which take into account only the most important properties of the structure, such as iteratively approximating to a solution via representations of kinematic states. Form finding is thus an extremely complex process, determined both by the freely selected parameters and by design decisions.
Architectural Science Review, 2020
This paper explores the potential for new hybrid composite material applications in Architecture by rethinking the role of fabrication in the process of form-generation. Our work presents the development of composite materials system consisting of two flexible materials, which, when acting together, allow for variable states of stiffness and gain structural capacity through the process of fabrication. This morphogenetic act occurs at the moment of making as a result of the symbiotic interaction between the two materials, their geometric arrangement and the fabrication process. Our aim is to investigate a novel approach for integrated design, where the fabrication process of a composite material actuates and enhances material performance. Our findings include a formal vocabulary of initial, pre-stretched geometries and their post-stretched counterpart, as well as comparisons between physical experiments and digital simulations of such composites.