Nanotube Sheet and Yarn Manufacturing and Commercialization (original) (raw)
Related papers
Science to Commercialization of Carbon Nanotube Sheet and Yarn
2017
Improved understanding of the science behind the nanotube synthesis process is driving continuous improvement of nanotube based yarn and sheet materials. Nanotube hybrid materials such as nanotubes and metals are being produced or assembled directly from the reactor which opens up a new arena of possibilities for the design of nanostructured materials. The cost of the materials will also be reduced due to higher yield manufacturing. Improved nanotube/hybrid materials are unique compared with many existing materials. Enticed by the potential commercial value of these materials, more industries are now beginning to supplement or replace their incumbent materials such as copper and composites with nanotube hybrid materials that are lighter, tougher, and carry more electrical current. This paper discusses the science and commercialization of nanotubes/hybrid materials along with a range of emerging applications that will benefit from the improved nanotube materials.
Improved Processing of Carbon Nanotube Yarn
Journal of Nanomaterials
We compared mechanical and electrical properties of carbon nanotube (CNT) yarns formed from four different spinning methods. In these methods, a yarn was spun from two aligned CNT arrays. CNT yarns fabricated from each method were tested quantitatively through the mechanical and electrical properties and reported. This improvement is considered to be caused by multiple factors, such as reduction of the yarn diameter, densification, water evaporation, and CNT orientation. The best electrical and mechanical property of CNT yarn was observed from the fourth spinning method where heating and tension during spinning were applied. The introduced yarn spinning methods are appropriate for continuous mass production of high strength carbon nanotube yarns with controlled diameter, strength, and electrical conductivity.
Studies of carbon nanotube (CNT) based composites have been unable to translate the extraordinary load-bearing capabilities of individual CNTs to macroscale composites such as yarns. A key challenge lies in the lack of understanding of how properties of filaments and interfaces across yarn hierarchical levels govern the properties of macroscale yarns. To provide insight required to enable the development of superior CNT yarns, we investigate the fabricationÀstructureÀmechanical property relationships among CNT yarns prepared by different techniques and employ a Monte Carlo based model to predict upper bounds on their mechanical
Criteria for Producing Yarns from Vertically Aligned Carbon Nanotubes
Nano, 2010
Critical yarning conditions from vertically aligned carbon nanotubes (VACNTs) using a chemical vapor deposition have been investigated. VACNTs with a diameter of around 15 nm have been synthesized with a length up to 3.7 mm. The yarning was realized exclusively in a limited range of the CNT lengths of about 170-1500 µm. Although CNTs became long for longer growth times, some of the CNTs were plucked out from the bottom substrate during growth so that the CNT density decreased at later stages of growth, prohibiting continuous yarning by the suppression of interconnection between CNTs at the bottom part of VACNTs.
Pioneering carbon nanotube textile engineering & fashion technology
Journal of Textile Engineering & Fashion Technology, 2019
This paper describes innovative work in the manufacturing of carbon nanotube (CNT) fabric and tape and how these materials can be used in textiles and fashion apparel. The field of CNT fabric is new and this article discusses the potential commercial impact of CNT fabric, the manufacturing barriers that currently exist, and provides suggestions to push the field towards large scale commercialization.
Carbon Nanotubes: Present and Future Commercial Applications
Science, 2013
Worldwide commercial interest in carbon nanotubes (CNTs) is reflected in a production capacity that presently exceeds several thousand tons per year. Currently, bulk CNT powders are incorporated in diverse commercial products ranging from rechargeable batteries, automotive parts, and sporting goods to boat hulls and water filters. Advances in CNT synthesis, purification, and chemical modification are enabling integration of CNTs in thin-film electronics and large-area coatings. Although not yet providing compelling mechanical strength or electrical or thermal conductivities for many applications, CNT yarns and sheets already have promising performance for applications including supercapacitors, actuators, and lightweight electromagnetic shields.
Carbon nanotube and its applications in textile industry – A review
The Journal of The Textile Institute
One of the major components of nanotechnology is Carbon nanotube (CNT) that can have a lengthto-diameter ratio more than 1,000,000. They are used in several fields in material science, due to their exceptional electrical, mechanical, and thermal properties, which are anisotropic. Different techniques have been developed to produce CNT. They have good potential for applications in various technological areas such as nanoelectronic, biotechnology, material science, polymer, composite, and textile industries. In this paper, recent researches on application of CNT in textile industry are reviewed. Treatment of textiles with CNT leads to the production of a wide variety of conductive textiles with different electrical properties. The wear performances of fabrics apply with CNT to open the potentiality of producing composite materials for conventional and innovative applications, ranging from conventional apparel and sportswear to protective clothing, heating equipment, automotive textiles, building covering, geo-textiles, biomedical textiles, etc.
Carbon-Nanotube Cotton for Large-Scale Fibers
Advanced Materials, 2007
. a) SEM images illustrate that CNT cotton can be easily spun into fibers; b) A segment of a CNT fiber spun from the CNT cotton; c) A plot of stress versus strain for a typical spun CNT fiber; (d) The failure mode of the CNT fiber: gradual thinning due to inter-nanotube sliding.
Investigation of microcombing parameters in enhancing the properties of carbon nanotube yarns
Materials & Design, 2017
Microcombing has been reported as a novel processing approach for reducing waviness and improving alignment of carbon nanotubes (CNTs), which effectively enhances the performance of materials made from CNT sheets. In this study, we have systematically investigated the effects of microcombing parameters on the properties of CNT yarns. It is found that the electrical and mechanical properties of CNT yarns first improved with increasing degree of microcombing and then degraded with over-combing. At the optimum degree of microcombing, the electrical conductivity, tensile strength, and Young's modulus of the CNT yarns were improved to 140%,