Scattering from Apertures: A General Boundary Integral Equations Based Approach (original) (raw)
Related papers
Generalized impedance/resistive boundary conditions for electromagnetic scattering problems
Radio Science, 1989
Generalized impedance boundary conditions are derived for a planar, homogeneous, magnetic dielectric slab grounded by a perfect electric conducting plane and for a magnetic dielectric coated, perfect electric conducting circular cylinder. By invoking the duality principle, generalized resistive boundary conditions are also obtained for a planar, transparent dielectric slab. In the method followed here, it is not necessary to have a prior knowledge of the Fresnel reflection and/or transmission coefficients of the configuration under study to obtain the generalized boundary conditions. The boundary conditions developed here for the planar slab recover the exact Fresnel reflection and transmission (for the transparent slab) coefficients. Finally, the boundary conditions for the coated cylinder are used to obtain a solution for the scattering of an obliquely incident plane wave field, and this result is compared with the exact solution.
Journal of the Optical Society of America. A, Optics, image science, and vision, 2010
This work presents a novel finite-element solution to the problem of scattering from multiple two-dimensional holes with side grating in infinite metallic walls. The formulation is based on using the surface integral equation with free-space Green's function as the boundary constraint. The solution region is divided into interior regions containing each hole or cavity as a side grating and exterior region. The finite-element formulation is applied inside the interior regions to derive a linear system of equations associated with nodal field values. The surface integral equation is then applied at the opening of the holes as a boundary constraint to connect nodes on the boundaries to interior nodes. The technique presented here is highly efficient in terms of computing resources, versatile and accurate in comparison with previously published methods. The near and far fields are generated for different single and multiple hole examples.
In this paper, we derive a new integral equation method for direct electromagnetic scattering in homogeneous media and present a numerical confirmation of the new method via a computer simulation. The new integral equation method is based on a paper written by DeSanto [1], originally for scattering from an infinite rough surface separating homogeneous dielectric half-spaces. Here, it is applied to a bounded scatterer, which can be an ohmic conductor or a dielectric, with some simplification of the continuity conditions for the fields. The new integral equation method is developed by choosing the electric field and its normal derivative as boundary unknowns, which are not the usual boundary unknowns. The new integral equation method may provide significant computational advantages over the standard Stratton–Chu method [2] because it leads to a 50% sparse, rather than 100% dense, impedance (collocation) matrix. Our theoretical development of the new integral equation method is exact.
The integral equation method for electromagnetic scattering problem at oblique incidence
Applied Numerical Mathematics, 2012
We consider the scattering of electromagnetic waves scattered by an infinitely long impedance cylinder at oblique incidence, which is modeled as a system of a pair of the two-dimensional Helmholtz equations with coupled oblique boundary conditions. The solvability of such a scattering problem is proven by using the boundary integral equation method. By expressing the scattered fields in the form of single-layer potentials, our oblique scattering problem is transformed to a system of two integral equations. It is not a usual Fredholm system of the second kind as that in the case of normal incidence, since the system involves the tangential derivatives of the single-layer potential. By relating it to the Cauchy integral operator, we show that this system of operators is of Fredholm type with index 0. Therefore, the solvability of the integral system follows from the uniqueness of its solutions due to the Fredholm theory. A numerical scheme for solving the integral equations is also presented with some numerics. The numerical results illustrate the validity and efficiency of the proposed method.
IEEE Transactions on Antennas and Propagation, 2013
We present a discontinuous Galerkin surface integral equation method, herein referred to as IEDG, for time harmonic electromagnetic wave scattering from nonpenetrable targets. The proposed IEDG algorithm allows the implementation of the combined field integral equation (CFIE) using square-integrable, , trial and test functions without any considerations of continuity requirements across element boundaries. Due to the local characteristics of basis functions, it is possible to employ nonconformal surface discretizations of the targets. Furthermore, it enables the possibility to mix different types of elements and employ different order of basis functions within the same discretization. Therefore, the proposed IEDG method is highly flexible to apply adaptation techniques. Numerical results are included to validate the accuracy and demonstrate the versatility of the proposed IEDG method. In addition, a complex large-scale simulation is conducted to illustrate the potential benefits offered by the proposed method for modeling multiscale electrically large targets.
Scattering from and penetration into a dielectric-filled conducting cylinder with multiple apertures
IEEE Transactions on Electromagnetic Compatibility, 1994
The theory of characteristic modes for aperture problems is used in this paper to solve the equivalent magnetic current and aperture fields due to a conducting cylinder with multiple slots. It is assumed that these slots are illuminated by either a transverse electric (TE) or a transverse magnetic (TM) plane wave and the media inside and outside the cylinder exhibit different electromagnetic properties. The formulation is given for the general case and numerical results for a limited number of slots are presented.
A discontinuous Galerkin surface integral equation method for scattering from IBC targets
International Journal of Numerical Modelling-electronic Networks Devices and Fields, 2019
A discontinuous Galerkin (DG) surface integral equation method is proposed for electromagnetic scattering from targets with the impedance boundary condition (IBC). We present electric field integral equation (EFIE), magnetic field integral equation (MFIE), and self-dual integral equation formulations for the problem, and study their numerical performance. Based on the results of these experiments, DG is developed for EFIE and MFIE (DG-EFIE and DG-MFIE). The convergence of the iterative solutions and the solution accuracy of DG-EFIE and DG-MFIE are further investigated for a wide range of surface impedances. The numerical performance of these formulations are found to be nearly complementary with respect to the surface impedance. The capability of the proposed DG solution strategy for calculating scattering from large multi-scale IBC targets is demonstrated.