Towards Assembly Information Modeling (AIM) (original) (raw)
Related papers
An integrated approach to CAD: modelling concepts in building design and construction
Design Studies, 1995
The lCON project is concerned with the creation of a generic information structure for the construction industry. A central feature of the information model is the use of object-oriented modelling techniques to allow information to be viewed from different 'perspectives' and at different levels of abstraction, according to the requirements of the user. This paper discusses the object modelling of concepts and information in the design area. Drawing on knowledge elicited from protocol analysis of the design activity, a series of interrelated object models has been developed, reflecting different perspectives and abstraction levels within the design domain. Three of these models (spatial design, physical design and structural design) are presented and their implications for the communication and sharing of information discussed.
TOWARDS DYNAMIC INFORMATION MODELLING IN ARCHITECTURAL DESIGN
Product modelling has received a lot of attention in the last decade and is now growing into a successful means to support design and production processes, also in the area of building and construction. Collaboration through data exchange and model integration are coming within reach for all participants in the building process. However, it is difficult to apply the current approaches in product modelling to architectural design. One of the major issues is the necessity for a design model to be conceptually adaptable as design proceeds and more information is becoming available or design decisions are reversed. It is also recognised that no assumptions should be made about design methods and that design information models must support various methods. Furthermore, concepts such as space and user activity play an important role in early design stages and must be supported by modelling tools. The success of computer support for architectural design therefore depends on how well it supports a dynamic handling of design information, as well as if it can handle information regarding non-technical issues. The paper describes and discusses three long-term, independent research projects that are being carried out in three European universities. The three projects all address the issues mentioned above. While their initiatives were independent and the developments are not formally related, they show strong similarities in terms of objectives, conceptual approach, and methodology.
Automatic design and planning of scaffolding systems using building information modeling
Advanced Engineering Informatics, 2014
Considering their significant impact on construction projects, scaffolding as part of the temporary facilities category in construction must be thoroughly designed, planned, procured, and managed. The current practices in planning and managing scaffolding though is often manual and reactive, especially when a construction project is already underway. Widespread results are code compliance problems, inefficiency, and waste of procuring and managing material for scaffolding systems. We developed a rulebased system that automatically plans scaffolding systems for pro-active management in Building Information Modeling (BIM). The scope of the presented work is limited to traditional pipe and board scaffolding systems. A rule was prepared based on the current practice of planning and installing scaffolding systems. Our computational algorithms automatically recognize geometric and non-geometric conditions in building models and produce a scaffolding system design which a practitioner can use in the field. We implemented our automated scaffolding system for a commercially-available BIM software and tested it in a case study project. The system thoroughly identified the locations in need of scaffolding and generated the corresponding scaffolding design in BIM. Further results show, the proposed approach successfully generated a scaffolding system-loaded BIM model that can be utilized in communication, billing of materials, scheduling simulation, and as a benchmark for accurate field installation and performance measurement.
Integrated software environment for building design and construction
Computer-Aided Design, 1990
The design and construction of buildings involves many different professionals and large volumes of diverse information. Presently, the major media for communicating design decisions are drawings and specifications. Along with the ability to automate portions of the design process comes the need to communicate design decisions in other forms. Electronic communication to date has largely taken the form of files of numerical data. As the use of the computer moves towards symbolic reasoning, communication by simple files of primarily numerical data become inadequate.
An information engineering approach to modelling building design
Automation in Construction, 1995
This paper highlights potential problems in the construction industry concerning the large quantities of information produced and the lack of an adequate information structure within which to coordinate this information. The Information Engineering Method (IEM) and Information Engineering Facility (IEF) CASE tool are described and put forward as a means of establishing an information structure at a strategic level thus providing a framework for the implementation of lower level applications systems.
The Creative Process of Architecture and Building Information Modeling
2012 UBT International Conference, 2012
Building Information Modeling and architecture, more commonly known as BIM is the subject of many discussions in the architectural communities lately. The architectural design is a complex set of transactions where the knowledge of many disciplines meets the professionalism of people involved, however most of the interaction is done on paper-based communication. Building Information Modeling, the subject of this paper, is a design strategy which aspires to be much more than a mere information exchange tool: it is rather a coordinated and holistic approach aimed to assist designer, engineers, developers, decision makers, contractors and owners. A digital model derived from B.I.M. (acronym for Building Information Modeling) software allows, among other features, the integration of the necessary data to all the participants of the project. It maintains and shares up to date information, facilitates the changes of the building components in real time and describes the project in a coherent way. Aggregating the information is the very essence of B.I.M., where sorting and the semantics of the building components are combined into a multidisciplinary interactive archive. The NIBS (National Institute of Building Science) defines B.I.M as "a representation of digital physical characteristics and functional properties of an object‖. At the same time B.I.M serves to share resources and information that will accompany the object in its project life cycle. The aim of this paper is to clear some concepts that are often ambiguous and confusing.
Robot-Oriented Design for Production in the context of Building Information Modeling
2016
Construction industry must make more extensively use of automation and robots in order to increase its productivity and reduce its impact in the environment. It seems that the first steps in this direction was taken with the Building Information Modeling (BIM) paradigm. Wide adoption of BIM, particularly for the activities of project and construction planning, could be exploited also in trying to introduce more control to the final processes of building construction through a computer interface, from design to production. The main motivation for this research is to study the impact of BIM in bridging the gap between design and construction. Considering the growing interest in applying additive manufacturing technology for future building construction, this paper proposes a computer-aided system that translates a generic architectural project in a set of pieces to be fabricated with 3D printers. The system uses a proposed set of algorithms to process the architectural project: it considers the division of the building in different parts or pieces to be fabricated, based on the work volume of the printer; it also considers the relative position of the part in the bed of the printer, for best results in production; minimum dimension of features to achieve mechanical resistance; and geometric features that would demand support material. IFC standard, in its fourth version, was analyzed for validation in the process to carry all the relevant information produced in design phases to fabrication.
Computer-Aided Planning of Connections Among Building Components
2000
In these last years the use of advanced technological types of construction, prevalently consisting of mechanical assembly systems, is also spreading to create connections among building elements. The aim of the research we are carrying on is to develop an automated software tool aiding the planning of assembly systems adopted in building, which are often characterised by high complexity levels. At the present, such subject is being studying in the mechanical field; but the difference of components and of products, seldom mass-produced and industrialised in building, make only few factors be available to our field, where further and different investigations are required The paper will show the progresses of the research proceeding, al the moment, along two directions: 1) The assembly simulation through: automated analysis, through the use of a mathematical model, of the formal and functional compatibility among the connection components, automated representation of the sequences of ...
2019
Building Information and Modelling (BIM) is a technology that allows Architecture, Engineering and Construction (AEC) professionals to digitally design, test, construct and manage the infrastructure. BIM in construction projects has not been fully implemented, due to a lack of effective strategy in the implementation of BIM. AEC industries struggle to implement BIM because of the absence of a Real-World BIM sample and BIM framework. This research aims to navigate AEC professionals to implement BIM with respect to structural discipline and this paper will also help to understand the coordination between other disciplines where one discipline model is superimposed on another discipline model. This paper will also help to understand different global BIM standards and the most efficient and effective BIM tools used all over the world. AEC professionals need assistance in the form of a framework that would provide a road map to process and implement BIM. Thus, the framework provided in the paper expected to increase BIM implementation and eventually widen the usage of BIM.
Information and Construction: Advanced Applications of Digital Prototyping in the Housing Industry
This study elaborates on recent efforts in applying Digital Prototyping strategies to realize a prefabricated construction system that allows for significant flexibility and adaptability in housing design. The rational of the described model is based on combining advanced BIM modeling with structural analysis, towards achieving high accuracy in the design phase, leading to subsequent precision in fabrication and assembly of a specific building system; the BONE Structure. Such an application aims at delivering significant levels of detailing in design and production of the system's components, thus supporting the intention of pre-defined assembly on jobsites, leveraging quality, and reducing waste. The paper represents a phase from a continuous research endeavor that aims at exploring technological enablers for mass customization in the housing realm, based on advanced levels of digitization of the design and production processes.