Assessment of Industrial Safety Education Programmes In Manufacturing Industries In Kaduna And Niger States Of Nigeria (original) (raw)
Related papers
Annals of Spiru Haret University Economic Series, 2023
People now spend many years of their adult lives at jobs where they are exposed to various hazardous chemicals, unsafe acts, and other diseases because of population growth and rapid technological advancements. Occupational diseases and injuries may arise because of risk factors in the workplace. This study examined health education as panacea to occupational diseases & injuries in Ibadan Southwest Local government of Oyo state, Nigeria. Descriptive survey research design was adopted, and the population comprises of all workers in Ibadan SouthWest Local government of Oyo state. The sample size was 250 respondents selected using simple and multi-stage sampling techniques to cover the forty-eight manufacturing companies in the area. A self-structured questionnaire was employed for data, which were analyzed using frequencies, percentages, and chi-square at 0.05 alpha level. It was found that the prevalence rate of occupational diseases in the facility had (x 2 =81.94, p<0.05), the extent to which occupational health and safety programs was promoted had (x 2 =71.51, p<0.05), the effectiveness of occupational health and safety programs had (x 2 =64.94, p<0.05). Based on the findings, health education is a panacea to occupational diseases and injuries in Ibadan SouthWest Local government of Oyo state, Nigeria. It was therefore recommended that Government should provide regular health training programs to review, promote, and maintain occupational health strategies. Manufacturing companies/facilities should employ adequate qualified health educators to enlighten the workers on the risks associated with occupational diseases and injuries.
Journal of Epidemiological Society of Nigeria, 2020
Background: Workplace safety measures are intended to reduce injuries, accidents and hazards to employees. This study was to determine the workplace hazard exposure, practice of safety measures and use of private protective equipment by workers in selected factories in Nnewi, Anambra State Nigeria. Methods: Using a cross-sectional descriptive design, a semi-structured interviewer-administered questionnaire and an observational checklist were data collection tools. Using a stratified sampling and proportionate random sampling techniques 816 staff from three strata participated in the study.Results: Out of the 634 completely filled questionnaires, 97.5% respondents were males and 65.8% were aged 26-40years. Majority (78.6%) had four or less years of experience and 23.5% earned between N21,000-N30,000 monthly. Most (96.8%) were trained to use protective equipment and 93.7% believed that their current job was hazardous. Out of the 182 respondents with high level of workplace hazard expo...
Practice of Safety Measures by Production Workers in two Nigerian Automobile Assembly Plants
Background: The practice of safety measures by workers in every industry and in particular automobile assembly industry is paramount to the maintenance of optimal health. Hence the need to study what actually is being practiced by the workers in automobile assembly companies. This study focused on the practice of safety measures by the workers in the 2 automobile assembly plants. Methods: All the production staff in two Automobile assembly plants were studied in this cross-sectional descriptive study. Three hundred and eighteen production staff participated in this study. A semi-structured interviewer-administered questionnaire was used. Data collected was analysed with the aid of the computer software: Statistical Package for Social Sciences (SPSS) Version 20. Frequency distributions and percentages of all relevant variables were represented in tables for easy appreciation. Results: Three hundred and eighteen production staff of the two automobile plants participated in this study giving a response rate of 100%. There were more males (96.9%), and majority of the respondents were single (72%). The commonest age group was the 26 – 30 years age group (37.4%). Majority of the respondents had secondary education (94%). Only 19.2% of the respondents underwent medical examination before they started working at the companies. Among all the respondents, only 182 (57.2%) agreed that they did go for periodic medical examination. Only 26.1% of the respondents reported that their employer organized occupational health and safety training programme for newly employed workers. Ninety-two (28.9%) of the respondents reported that their employer organized periodic trainings for workers. All the respondents (100.0%) agreed that they were provided PPDs in their workplace. However, only 38.4% of respondents were trained on the use of PPDs and only 14.9% used the PPDs always. Conclusion: This study has shown that the workers practice of safety measures was poor. We recommend that managements of the companies provide all the necessary PPDs, organise occupational safety and health trainings for new staff and periodic trainings for old staff and also enforce safety rules.
ATBU Journal of Science, Technology and Education, 2018
This study determined the strategies for preventing industrial accidents in technical education workshops in technical colleges in Edo and Delta States, Nigeria. Descriptive survey research design was adopted for the study. Two research questions were formulated to guide this study and two null hypotheses were tested at .05 level of significance. The population of the study consisted of 316 respondents from medium scale industries (34), technical teachers (129) and final year students (153) in technical colleges from the colleges of education in the two states. The population was manageable; hence census sampling technique was adopted using the entire population for the study. Ninety (90) items questionnaire derived from literature was the instrument used for data collection. The instrument was face-validated by five experts. The instrument was pilot tested, data collected were subjected into reliability test using Cronbarch’s alpha, and the analysis gave reliability coefficient of ...
The Impact of Safety on Engineering Practice: A Case Study of Technical Sector in Nigeria
The Impact of Safety on Engineering Practice: A Case Study of Technical Sector in Nigeria, 2020
In the course of practicing technical responsibilities a lot of accidents have occurred in Nigeria in the past resulting to injuries, deaths, permanent disabilities, equipment damage and pollution to the environments. This research paper was developed to identify the level of risk and hazard awareness/ management in Nigeria technical sector with a view to finding solutions to causes of safety problems in order to minimize unintended occurrence to as low as reasonably practicable in Nigerian industries.The materials were used for this research include; Calculator, field note, pen, Laptop and Microsoft excel software. Two research hypotheses (null and alternative hypothesis) were developed and tested. The data used for this research were collected using 50 copies of structured questionnaires that were distributed to elicit responses from respondents. Data analysis was done using F-distribution on collected responses in order to test research hypotheses to determine their significance or otherwise. The analyzed research data show that; there is significance in the test, test Null hypothesis is rejected, while the alternative which says; there is a significant relationship between lack of safety awareness and increased rate of accidents in Nigerian Engineering practice" is accepted. From the findings of this research the following recommendations were made; (1)that the federal government of Nigeria through its Ministry of Education and National University Commission should develop a curriculum for general safety and incorporate same in general study subjects taken at all levels of Nigerian schools, so as to help galvanize safety and security consciousness of every Nigerian. (2), the establishment of safety department in all establishments operating in Nigeria was recommended, so as to ensure strict enforcement and compliance with safety norms and safe work habits by Nigerians.
September , 2011
Background: Studies show that about 2 million workplace associated deaths per year outnumber people killed in road accidents, war, violence, and through AIDS, and cost 4 per cent of the world's gross domestic product in terms of absence from work, treatment, disability and survivor benefits. Furthermore, food manufacturing reportedly has one of the highest incidences of injury and illness among all industries. In fact, many production jobs in food manufacturing involve repetitive, physically demanding work. The aim of this study was to assess the level of knowledge, attitude and practices on occupational hazards and safety measures among production workers of Nēstle Nigeria Plc, Agbara Factory.
PREVENTION OF INDUSTRIAL ACCIDENTS : MEASURES AND CHALLENGES Prof
2017
Safety issues have always a major problem and concern in any organizational or industry in the world (Clarke, 2006). Organizational nature of industrial accidents and empirical work has focus on the identification of workers attitudes, work environment, management concern for safety and conflict between productions with safety that influence accidents causation at workplace. The purpose of this study is to examine whether workers attitudes, work environment, management concern for safety and conflict between production and safety have a relationship to the number of accidents at workplace. A set of questionnaires were distributed for data gathering to 350 employees at different level of hierarchy that work at hazardous workplace in different department of Bosch Ltd (Bangalore plant, Adugodi). The results indicate that safety measures undertaken by industry has a significant relationship with dependent variable due to its positive correlations,the next output is Communication about s...
To have a vibrant and productive economy in any nation, it becomes imperative that the health and safety of her workers must be given priority attention by the worker himself, employer and the government. Because of the increasing industrialization, infrastructural developments and modernization taking place in developing countries particularly like Nigeria. These factors have not only increased the job opportunities in and around the country but at the same time increased the incidence of morbidity and mortality of workers. And so it is important that the worker has an in depth knowledge and understanding of the nature of the job with regards to the health hazard exposures peculiar to the job and the safety measures to be undertaken even before accepting the job. More so, safety officers, factory and industrial managers etc. need to appreciate the need to know all that is involved in the job in order to make the workplace a safe and conducive one for the worker and achieve high productivity. This paper attempts to highlight a lot of occupational hazards that occur among both the formal and informal Nigerian workers, reasons for their occurrences, safety measures, lapses on the part of the employer and reveals the laxity on the part of government to enact and enforce occupational safety and health laws.
In both developed and developing countries, the oil and gas industries are considered to be one of the most significant industries in terms of its impact on health and safety of the working population. Oil and Gas industries are both economically and socially important. However, the oil and gas industries are also recognized to be the most hazardous. This research was set out to assess accident rate, safety performance and compliance in three different sectors of oil and gas producing companies in Nigeria (indigenous, national and international oil and gas industries) and to know DPR standard of safety for the oil and gas company.