Thermal Analysis of Shell and Tube Heat Ex-Changer Using C and Ansys (original) (raw)
Related papers
THERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING MAT LAB AND FLOEFD SOFTWARE
IJRET, 2012
In this paper, a simplified model for the study of thermal analysis[1] of shell-and-tubes heat exchangers of water and oil type is proposed..Shell and Tube heat exchangers are having special importance in boilers, oil coolers, condensers, pre-heaters. They are also widely used in process applications as well as the refrigeration and air conditioning industry. The robustness and medium weighted shape of Shell and Tube heat exchangers make them well suited for high pressure operations. In this paper we have shown how to done the thermal analysis by using theoretical formulae for this we have chosen a practical problem of counter flow shell and tube heat exchanger of water and oil type, by using the data that come from theoretical formulae we have design[2] a model of shell and tube heat exchanger using Pro-e and done the thermal analysis by using Floefd software and comparing the result that obtained from Floefd software and theoretical formulae. For simplification of theoretical calculations we have also done a Matlab code which is useful for calculating the thermal analysis of a counter flow of water-oil type shell and tube heat exchanger
HEAT TRANSFER ANALYSIS ON SHELL AND TUBE HEAT EXCHANGERS
In the present study inlet temperature of shell and tube side are taken as input parameters with a given bundle arrangement of square pitch. The thermal analysis is done firstly taking water inside the tube and steam on shell side. The design of shell and tube exchanger using Kern method for water and steam combination is validated by well-known Dittus-Boelter equation of turbulent flow inside tube. The analysis is extended using the above Kern method with different fluid combinations such as sulphur-dioxide on the tube side steam on shell side and carbon-dioxide side on tube side and steam on shell side, Parameters such as heat transfer coefficient, friction coefficient, length, area and pressure drop are determined. "C" Program is written to evaluate the above parameters. Graphs are drawn to depict the behavior for different fluid combinations. The results are tabulated.
Temperature Analysis of Shell and Tube Heat Exchanger
This study has been undertaken to study the performance of the shell and tube heat exchanger. Shell and tube heat exchangers are one of the most commonly used type of heat exchangers in the industry for heat exchange purpose. This study shows the effect of various parameters such as pitch layout and baffle spacing on the heat exchanger performance. Standard analytical calculations are used to study the same. © 2018, IRJET | Impact Factor value: 6.171 | ISO 9001:2008 Certified Journal | Page 3268 The hydraulic diameter for square pitch can be given as, De =
Performance Analysis and Design Optimization of Shell and Tube Heat Exchangers
2021
Shell and Tube heat exchangers are having special importance in boilers, oil coolers, condensers, pre-heaters. They are also widely used in process applications as well as the refrigeration and air conditioning industry. The robustness and medium weighted shape of Shell and Tube heat exchangers make them well suited for high pressure operations. The aim of this study is to experiment, validate and to provide design suggestion to optimize the shell and tube heat exchanger (STHE). The heat exchanger is made of acrylic material with 2 baffles and 7 tubes made of stainless steel. Hot fluid flows inside the tube and cold fluid flows over the tube in the shell. 4 K-type thermocouples were used to read the hot and cold fluids inlet and outlet temperatures. Experiments were carried out for various combinations of hot and cold water flow rates with different hot water inlet temperatures. The flow conditions are limited to the lab size model of the experimental setup. A commercial CFD code wa...
Thermal Analysis of Heat Exchanger Tubes: A Review
2019
Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion and exchange of thermal energy and heat between physical systems. This paper consists of a review of different a thermal analysis of heat exchanger tube by using different parameters. A model of shell and tube type heat exchanger having both interacting mediums as water and steam is considered. In review of some paper thermal analysis of Heat Exchanger has been taken. Analysis has been done in ANSYS performed by applying several thermal loads on different faces and edges. Some authors have done theoretical calculations C code which is useful for calculating the thermal analysis of a counter flow of water-oil type shell and tube heat exchanger. And some authors found the heat transfer capabilities of several thermal materials which have been compared by assigning different materials.
Journal of Engineering Research
Widely known that, heat exchanger is a device that is being used to transfer thermal energy (enthalpy) between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. The most common heat transfer devices are concentric tube (double pipe), shell and tube and, plate heat exchanger. Nowadays, Shell and tube heat exchangers were used extensively in most industries as petrochemicals, oil and refineries. According to previous survey, almost 45% of heat exchangers utilized are shell and tube heat exchangers due to its highpressure application it is more suitable in the field of oil & petrochemical application. Thus, the following study presented shell and tube type only. Due to complexity of studying heat exchangers experimentally, Computational Fluid Dynamics (CFD) used to simulate the effect of local surface heat transfer coefficients on the surfaces by aid of computer numerical calculation and graphical display. In addition, analysis of the physical phenomena involved in fluid flow and heat conduction would be presented in the following research paper with Comparative designs for shell and tube heat exchangers. The paper considered a review for the design of a shell and tube heat exchanger. A variety of heat exchangers are used in industry and in their products. The objective of this paper is to describe most of these heat exchangers in some detail using classification schemes and the basic design methods for two fluid heat exchangers. The design techniques of recuperators and regenerators. Therein, popular analytical techniques such as log mean temperature difference (LMTD) and effectiveness-number of transfer units (ε-NTU) were considered in the analysis. In the case considered herein, both LMTD and ε-NTU techniques yield the same exact results. Keywords-Heat Exchanger; Shell and tube heat Exchanger; parallel flow; counter flow; single pass shell and tube.
Study and Comparison of Performance of Shell and Tube Heat Exchanger with Two Numerical Methods
International Journal for Research in Applied Science and Engineering Technology, 2018
The single phase shell and tube heat exchangers are widely used in process industries. The thermal design of shell and tube heat exchanger (STHE) is most important as it affects the principal cost and operating cost of the heat exchanger. In the present paper, a comparision of distilled water to raw water STHE is done using Kern method and Udayet al. method. This paper purely aims at studying and comparing the shell side heat transfer coefficients of the two numerical methods of STHE.
Thermal Analysis of Shell and Tube Heat Exchanger with Different Materials
Heat transfer is phenomena that rate of heat exchange between the two different body's for this heat transformation in industries are large number of body's we will use. A device which will used to transform heat form one fluid to and another fluid that the device called heat exchanger .we have various industries which are using the heat exchanger like engineering process, refrigeration, air-conditions systems power system, food processing units and chemical reactors. In this project we did design of shell and heat exchanger by using the catia v5 r20 after the design we did analysis of heat exchanger by using the ansys14.5 with different materials we calculate the heat flow over the shell and tube heat exchanger Index terms-heat exchanger, heat transfer, nano fluids, periodic flow, mass flow rate, nusselt number & reynolds number
THERMAL ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER USING CFD
In present day shell and tube heat exchanger is the most common type heat exchanger widely use in oil refinery and other large chemical process, because it suits high pressure application. The process in solving simulation consists of modeling and meshing the basic geometry of shell and tube heat exchanger using CFD package ANSYS 15.0. The objective of the project is design of shell and tube heat exchanger with helical baffle and study the flow and temperature field inside the shell using ANSYS software tools. The heat exchanger contains 7 tubes and 600 mm length shell diameter 100 mm. The helix angle of helical baffle will be varied from 0 to 20. In simulation will show how the pressure varies in shell due to different helix angle and flow rate. The flow pattern in the shell side of the heat exchanger with continuous helical baffles was forced to be rotational and helical due to the geometry of the continuous helical baffles, which results in a significant increase in heat transfer coefficient per unit pressure drop in the heat exchanger. Keywords: Thermal Analysis, Shell, heat exchanger etc.
Shell and Tube Heat Exchanger Performance Analysis
2014
A heat exchanger is a device that is used to transfer thermal energy (enthalpy) between two or more fluids, at different temperatures and in thermal contact. In this problem of heat transfer involved the condition where different constructional parameters are changed for getting the performance review under different condition. An excel program has been developed for the ease of calculation and obtaining result after changing different parameters. The tube diameter, tube length, shell types etc. are all standardized and are available only in certain sizes and geometry. And so the design of a shell-and-tube heat exchanger usually involves a trial and error procedure where for a certain combination of the design variables the heat transfer area is calculated and then another combination is tried to check if there is any possibility of increasing the heat transfer coefficient. Since several discrete combinations of the design configurations are possible, the designer needs an efficient...