Smart Eggs Incubator System (original) (raw)

Development of smart egg incubator system for various types of egg (seis)

2008

The purpose of this project is to design and develop the system of an egg incubator that able to incubate various type of egg named as Smart Egg Incubator System for Various Types of Egg (SEIS). The SEIS will fill up with the temperature and humidity sensor that can measure the condition of the incubator and automatically change to the suitable condition for the egg. The health of egg is very important for the development of embryo within the egg. Improper control means that the temperature or humidity is too high or too low. In this project, the light heater is use to give the suitable temperature to the egg. By using the water and controlling fan, it is can make sure the humidity and ventilation in good condition. The status condition in the SIES will appear on the LCD screen display. To make sure all part of egg was heated by lamp, DC motor is very useful to rotate iron rode at the bottom side and automatically change the position of egg. The entire element will be controlled using programmable integrated circuit (PIC). The PIC is a type of microcontroller that can process a data from sensor and will execute the control element to change the condition of SEIS. This project will be a user friendly product since the SEIS can move to other place. It will secure by user must enter the password before activate the system. vii

Design and Implementation Automated Egg Incubator

2021

Artificial egg incubators are devices used for incubating and hatching eggs through preservation the required conditions for fetus development inside the egg. Generally, this paper aims to design and implement an egg incubator system in order to provide adequate conditions for egg hatching and to meet the growing market needs for locally grown white meat at reasonable prices, this system uses software program for controlling the temperature and humidity using the proteus program and Arduino ide. This incubator system is based on two Arduino boards one of which is Arduino nano reads the temperature and humidity values inside the incubator chamber and it is displayed 16x2 display screen when this value is more than the maximum or less, then the bell gives sound to indicate of the exceeded permissible values and the controller processes. It controls the motor that turns the eggs to change their position in order to prevent the embryo from sticking to the shell. the electronic lock that...

Smart Egg Incubator Based on Microcontroller: A Review

Academic Journal of Nawroz University

Artificial egg incubators are devices that are used to incubate and hatch eggs by maintaining the necessary conditions for fetal development within the egg. Any egg that is being incubated requires a great deal of attention and temperature control. This is accomplished by the use of a temperature control device that runs on electricity. Incubator temperatures are often kept between (98 and 100) degrees Fahrenheit. Even yet, only 78 to 85% of eggs will hatch. To increase the hatchability of the incubator unit, many recommendations are made. Moisture content is another essential consideration that should be stated in the range of 60% to 80%. While hatching the eggs in an incubator unit, there are a number of important aspects to consider. However, the most crucial component is to keep the temperature range within acceptable limits. In this respect, there are many research papers accessible. In general, this article reviewed latest 21 works in literature and provided a complete analysi...

Design and Implementation of a Remotely Monitored Smart Egg Incubator

International Journal of Scientific & Engineering Research, 2021

The Automated smart egg incubator is microcontroller based device that can aid in large proportion production of chicks for poultry establishment. It entails an automatic transfer switch that transfers the load to any available source by making the grid the priority to make sure that there will be steady power supply. To achieve temperature regulation, a DHT22 sensor is integrated into automatically temperature and humidity monitoring system of the incubation system that ensures the temperature and humidity are within the required value. An egg tray was attached to a DC motor to form the egg spinning mechanism to spin the egg at angle 45 o at interval of an hour. Due to temperature and humidity variation, the eggs may hatch at about 21 days. A sound sensor picks the sound from a day old chicks to send message to the farmer, alerting the condition of the farm. To monitor the temperature and moist level in the farm, an LCD displays the status of the incubator temperature and humidity. For remote monitoring, a GSM module to send temperature and humidity update on request to the farmer, this makes the system flexible as it reduces stress of visiting the location of the incubator. The result obtained shows that the system could regulate the temperature within the range of 37 o C to 39 o C which was adequate for the egg to hatch. The system can be used for different types of egg as it gives room for adjustment of the temperature and also adjustment of the spinning time through its setting bottoms.

Design and Construction of an Arduino Microcontroller-based EGG Incubator

International Journal of Computer Applications

Meeting the high demand for poultry products calls for the use of artificial egg hatcheries but the backyard and small-scale poultry farmers are constrained by the dependence on natural incubation or on commercial hatcheries for young birds for breeding. In this paper an incandescent bulb heat source incubator is designed and constructed to hatch 14000 quail eggs (4500 chicken egg equivalent). The incubator system is an Arduino microcontroller-based, which controls the heaters, air circulation fans and the mechanism for turning the trays, through relays. The prevailing conditions in the incubator (temperature and the humidity) are displayed on a 16x2 LCD screen. The objective of the design is to help produce a low cost, energy efficient incubator for hatching Japanese quail eggs.

The Prototype Design of Duck Egg Incubator Machine Using Arduino Uno R3 Microcontroller

JTKSI (Jurnal Teknologi Komputer dan Sistem Informasi)

In incubating duck eggs, traditionally it can be done using other poultry parents that are incubating the eggs. This method can be done by placing another egg together with the egg which is being incubated by the mother. In an effort to increase the productivity of the resulting ducklings, this research focuses on the development of a duck egg incubator prototype using Arduino Uno R3 microcontroller. The first step in temperature control is to determine the temperature set point (desired temperature value). The output in the form of heat is read by NTC 10K temperature sensor which then becomes an input. If the temperature input which is read is less or more than the specified temperature, the module relay works to turn on or turn off the incandescent lamp. The main source of heat generation in the incubator room is an incandescent lamp, so a relay module is used to control the on/off of the light. This is so that the temperature produced from the incandescent lamp is stable accordin...

DESIGN AND CONSTRUCTION OF A SMART EGG INCUBATOR SYSTEM WITH GSM BASED REMOTE ACCESS

The Smart egg incubator system with GSM remote access control is a microcontroller based temperature control and monitoring system. The system is designed to incubate different types of eggs, having a user friendly interface to set the temperature range for its operation. The temperature is monitored by a digital thermometer DS1820 and controlled by a microcontroller AT89S52 embedded with a software program which toggles it between high and low temperature. The GSM module provides the system with remote access, whereby the user can monitor the temperature as well switch the system on and off. The egg roller is a mechanical part needed to roll the eggs at intervals, to ensure proper development of embryos in the eggs. The incubator will help the agricultural industry to increase productivity in poultry production. It is automatic and user friendly; it reduces the stress of monitoring and ensures maximum productivity. It is able to incubate different types of eggs, thus reducing the cost of acquiring different types of incubator. The prototype incubator constructed has been able to achieve the aims and objectives of the research albeit with modifications.

Digital Egg Incubator System (DEIS)

An incubator is a device which hatches and simulates avian incubation by keeping eggs warm and in the correct humidity. The incubators available in the market are mostly designed to support a specific type of egg and are quite expensive too. Limitations like cost, egg type, device specifications are the only problem that current device have. This project tries to overcome these limitations. In this project the incubators make use of heat sensors whose output is constantly monitored by a microcontroller so as to manage the temperature range of the specific egg. The microcontroller has been programmed to handle various eggs by predefining the requirements in its code and it is monitored using GSM. The egg type can be easily selected through buttons and an LCD display.

A low-cost smart egg-incubator

Sustainable Engineering and Innovation

Poultry is one of the most consumed agricultural produce in Ghana. Because of this high demand, the problem necessitates efforts to maximize the yield of poultry production in the country. Relying on natural means of hatching eggs to increase poultry production is inefficient thus the need for technologies that will aid in maximizing the yield. Artificial means of solving this problem have brought about the invention of the incubator. Although this has helped in large-scale incubation, incubators in the market are very expensive which makes Ghanaian poultry farmers find it difficult to purchase. This project investigates the design and implementation of an affordable, automated incubator for local poultry farmers. It is aimed at designing a low-cost smart incubator to ensure the maintenance of the optimum environmental conditions necessary for hatching eggs. These conditions: Ventilation, Temperature, Relative Humidity, regular positioning, and eggs turnings are kept at their optima...

Development of Chicken Egg Hatching Incubator Machine (Natasha-CEHIM)

2020

This paper presents a development of egg incubator system for chicken eggs incubation. The chicken egg hatching incubator machine are equipped with DHT22 and PIR sensors that able to automatically regulate and monitor the temperature and humidity in the incubator to create the ideal condition to incubate chicken egg. The entire system will be controlled using Arduino Uno control system as the brain of the system which control and operate the motor and sensors to detect necessary environment condition which then produce output signal for incubate operation. A DHT22 sensor that act as input detects temperature and humidity in the incubator and send it to the Arduino to display the condition of the incubator on the LCD screen display. The function of egg incubator is to be able to hatch chicks from egg while the mother hen can be free to lay more eggs hence increase the production of chicken egg, reduce the manpower, reduce hatching time and give a better efficiency during operation.